![flymcu停止连接isp](https://i-blog.csdnimg.cn/blog_migrate/bc989a33cc8e9f2b7cb681c6cf17501e.png)
flymcu停止连接isp
UPDATE: Here's a Bit.ly Bundled Link of the complete "Wiring your house for Gigabit Ethernet 5 PART SERIES."
更新:这是完整的“为千兆以太网5部分系列为房屋布线”的Bit.ly捆绑链接。
The house is finished and the Verizon FIOS guy has just left. We're all set and I've tested at 15mbps down and 2mbps up. According to Verizon my account will be upgraded to 15 down and 15 up on the 19th of November. (You have to call if you want to upgrade.)
房子完工了,Verizon FIOS的家伙刚刚离开。 我们都准备好了,我已经以15mbps和2mbps的速度进行了测试。 根据Verizon的说法,我的帐户将于11月19日升级为15升级和15升级。 (如果要升级,必须致电。)
I've got details on FIOS from our first installation at the other house. At this house the installer came and and hooked up the ONT (Fiber Optic convertor) on the outside of the house. I had RJ45 cable pulled to the outside of the house but according to the installer they prefer to use Coax for the last lengths between the ONT and the router in the house. So he ended up going...
我从另一家的第一个安装中得到了FIOS的详细信息。 安装人员来到这所房子,然后将ONT(光纤转换器)挂在房子的外面。 我将RJ45电缆拉到房屋的外面,但是根据安装人员的介绍,他们更喜欢使用同轴电缆作为ONT和房屋中路由器之间的最后一段距离。 所以他最终去了...
Street Fiber->ONT->Coax->Router->RJ45
街道光纤-> ONT->同轴电缆->路由器-> RJ45
...just like this diagram. We borrowed on of the extra Coax cables and put the new router (still an ActionTec, but a nicer model) into the hinged bracket at the bottom of the wiring closet. The router is a bridge between the Coax and the RJ45. We plugged it into the router and checked the house's network drops. I turned off WEP and turned on WPA for Wireless Security. Next I'll plug in our VOIP adapter and turn on QoS (Quality of Service.)
...就像这个图。 我们借用了额外的同轴电缆,然后将新路由器(仍然是ActionTec,但型号更好)放入配线柜底部的铰接支架中。 路由器是同轴电缆和RJ45之间的桥梁。 我们将其插入路由器,并检查房屋的网络中断。 我关闭了WEP并打开了WPA for Wireless Security。 接下来,我将插入我们的VOIP适配器并打开QoS(服务质量)。
I also mounted a UPS (battery) on the wall below the closet to make sure we keep connectivity if the power goes out. The ONT outside has a UPS of its own, but that UPS is woefully underpowered. If you want to keep your FIOS up, get another wall-mounted UPS and plug Verizon's little one into it.
我还在壁橱下方的墙壁上安装了UPS(电池),以确保在断电时保持连接状态。 外部的ONT拥有自己的UPS,但是UPS的功率严重不足。 如果要保持FIOS正常运行,请购买另一台壁挂式UPS,并将Verizon的小UPS插入其中。
The wiring guys did a great job and labeled everything just like I like it. Nice and organized. That's the #1 tip in all of this - stay organized. We've got labels at the end of each cable marking what it's for as well as permanent ink written on the cables themselves.
接线人员做得很出色,并按照我喜欢的方式标记了所有内容。 尼斯和有条理。 这是所有这些中的#1秘诀-保持井井有条。 我们在每根电缆的末尾都有标签,标明其用途以及在电缆本身上写的永久墨水。
The next step will be hooking up all the computers and running a traffic generating program to flood the network and see if the Netgear switch (the one folks in the comments were concerned was suboptimal) holds up.
下一步将是连接所有计算机并运行一个流量生成程序以泛洪网络,并查看Netgear交换机(注释中涉及的人不是最理想的)是否保持正常。
This is going to be fun. It's odd how hooking up water and power and sewer are trivial and boring but when Internet gets hooked up, suddenly this empty house has potential. We'll move in completely in 10 days.
这将会非常好玩。 奇怪的是,水,电和下水道的连接琐碎而无聊,但是当互联网连接起来时,这间空荡荡的房子突然有潜力。 我们将在10天内完全入住。
翻译自: https://www.hanselman.com/blog/wiring-the-new-house-for-a-home-network-part-3-isp-hookup
flymcu停止连接isp