mt7688 openwrt dts 文件解释

最新推荐文章于 2024-08-06 17:39:18 发布

forAllforMe

最新推荐文章于 2024-08-06 17:39:18 发布

阅读量3.7k

点赞数 2

本文链接：https://blog.csdn.net/cym_anhui/article/details/86561910

版权

Mt7688 同时被 3 个专栏收录

42 篇文章 2 订阅

订阅专栏

Openwrt

42 篇文章 2 订阅

订阅专栏

Mt7688

4 篇文章 0 订阅

订阅专栏

/dts-v1/;

/include/ "mt7628an.dtsi"

/ { //根节点
compatible = "widora", "mediatek,mt7628an-soc"; //板子
model = "WIDORA-NEO"; //

   chosen { //通过dts 内核传给uboot的bootargs参数
       bootargs = "console=ttyS0,115200"; // 控制台 uart0
   };

   memory@0 { //memory 节点
       device_type = "memory"; //
       reg = <0x0 0x8000000>; //Memory 起始地址 0x00，长度0x8000000
   };

#arch/mips/ralink/mt7620.c

static struct rt2880_pmx_group mt7628an_pinmux_data[]

   pinctrl { //管脚配置，mt7620.c
       state_default: pinctrl0 { //
           gpio { //
               ralink,group = "gpio"; //
               ralink,function = "gpio"; //
           };
           perst { //
               ralink,group = "perst"; //
               ralink,function = "gpio"; //
           };
           refclk { //
               ralink,group = "refclk"; //
               ralink,function = "gpio"; //
           };
           i2s { //
               ralink,group = "i2s"; //
               ralink,function = "i2s"; //
           };
           spis { //
               ralink,group = "spis"; //
               ralink,function = "gpio"; //
           };
           wled_an {
               ralink,group = "wled_an";
               ralink,function = "wled_an";
           };
           ephy_p1 {
               ralink,group = "ephy_p1";
               ralink,function = "gpio";
           };
           ephy_p2 {
               ralink,group = "ephy_p2";
               ralink,function = "gpio";
           };
           ephy_p3 {
               ralink,group = "ephy_p3";
               ralink,function = "gpio";
           };
           ephy_p4 {
               ralink,group = "ephy_p4";
               ralink,function = "gpio";
           };
           wdt {
               ralink,group = "wdt";
               ralink,function = "gpio";
           };
       };
   };

   palmbus@10000000 { //片内总线，类似arm的amba，0x10000000---0x100000ff sysctl
       spi@b00 { //
           status = "okay"; //

pinctrl-names = "default"; //
pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>; //

           m25p80@0 { //0x10000B00--0x10000BFF SPI master
               #address-cells = <1>; //
               #size-cells = <1>; //
               compatible = "w25q256"; //
               reg = <0 0>; //
               linux,modalias = "m25p80", "w25q256"; //
               spi-max-frequency = <40000000>; //
               m25p,chunked-io = <31>; //

               partition@0 { //u-boot分区，第一个分区,偏移地址 0x0
                   label = "u-boot"; //u-boot分区
                   reg = <0x0 0x30000>; //起始地址0x0，长度 0x30000
                   read-only; //属性,只读
               };

               partition@30000 { //第二分区，u-boot-env 环境变量
                   label = "u-boot-env"; //u-boot-env 环境变量
                   reg = <0x30000 0x10000>; //起始地址0x30000，长度 0x10000
               };

               factory: partition@40000 { //第三分区，偏移地址 0x40000
                   label = "factory"; //wifi校准参数
                   reg = <0x40000 0x10000>; //起始地址0x40000，长度 0x10000
               };

               partition@50000 { //第四分区，偏移地址 0x50000
                   label = "firmware"; //固件程序
                   reg = <0x50000 0x1fb0000>; //起始地址0x50000，长度 0x1fb0000
               };
           };

           spidev@1 { //第二个spi设备
               #address-cells = <1>; //表示地址空间的个数
               #size-cells = <1>; //表示地址空间所需的字节数
               compatible = "spidev"; //static struct platform_driverXXXX_driver 匹配
               reg = <1 0>; //
               spi-max-frequency = <40000000>; //spi 频率是400K
           };
       };

       i2c@900 { //I2C 寄存器地址范围0x10000900-0x100009FF,看编程手册
           status = "okay"; //okay 编译进内核
       };

       uart1@d00 { //UART1=UARTLITE2 寄存器地址范围0x10000d00-0x10000dFF,看编程手册
           status = "okay"; //okay 编译进内核
       };

       uart2@e00 { //UART2=UARTLITE3 寄存器地址范围0x10000E00-0x10000EFF,看编程手册
           status = "okay"; //okay 编译进内核
       };

       pwm@5000 { // PWM 寄存器地址范围0x10005000-0x10005FFF,看编程手册
           status = "okay"; //okay 编译进内核
       };
   };

   ethernet@10100000 { //ethernet寄存器地址范围0x10100000-0x1010FFFF,看编程手册
       mtd-mac-address = <&factory 0x28>; //在factory分区的偏移地址0x28 对应是lan mac 地址
   };

   sdhci@10130000 { //SDXC/eMMC 寄存器范围0x10130000-0x10137FFF
       status = "okay"; //okay 编译进内核
       mediatek,cd-low; //
   };
gpio-keys-polled { //

#在目录 /package/kernel/gpio-button-hotplug/src/gpio-button-hotplug.c 匹配platform_xxx结构体的 .name 字段
compatible = "gpio-keys-polled"; //static struct platform_driverXXXX_driver 匹配
#address-cells = <1>; //
#size-cells = <0>; //
poll-interval = <20>; //查询间隔 20ms
wps { //wps健
label = "reset"; //
gpios = <&gpio1 6 1>; // gpio1 is GPIO32--GPIO63，WPS=GPIO38 is gpio1 +6，平时为高,即低电平有效
linux,code = <0x211>; //
};
};
};