IA32 embedded developing board installation and configuration
by daniel on Mar. 31, 2008
1- hardware
IA32 main board with 900MHZ CPU, SATA hard disk, 512M RAM.
2- Software
Ubuntu 7.04 (kernel 2.6.20)
3- Installation
use two disks, the 1st disk (/dev/sda) is Ubutu, the 2nd disk (/dev/sdb) shall be empty.
sudo fdisk -l
delete all patition in /dev/sdb
dd if=mbr_bin of=/dev/sdb count=512
patition the disk into 2 patitions, the 1st one is boot , the 2nd one is root
dd if=redboot_image of=/dev/sdb1 conv=sync
mkfs -t ext3 /dev/sdb2
cp busybox vmlinuz to root
4- Configuration
ifconfig eth0 up
route add -host default gw xxx.xxx.xxx.xxx
udhcp
by daniel on Mar. 31, 2008
1- hardware
IA32 main board with 900MHZ CPU, SATA hard disk, 512M RAM.
2- Software
Ubuntu 7.04 (kernel 2.6.20)
3- Installation
use two disks, the 1st disk (/dev/sda) is Ubutu, the 2nd disk (/dev/sdb) shall be empty.
sudo fdisk -l
delete all patition in /dev/sdb
dd if=mbr_bin of=/dev/sdb count=512
patition the disk into 2 patitions, the 1st one is boot , the 2nd one is root
dd if=redboot_image of=/dev/sdb1 conv=sync
mkfs -t ext3 /dev/sdb2
cp busybox vmlinuz to root
4- Configuration
ifconfig eth0 up
route add -host default gw xxx.xxx.xxx.xxx
udhcp