uboot的help学习

uboot命令

所有命令

=> ? 
?       - alias for 'help'              # 调出所有的命令
base    - print or set address offset   # 打印或者设置base地址偏移
bdinfo  - print Board Info structure
bmode   - sd1|sd2|qspi1|normal|usb|sata|ecspi1:0|ecspi1:1|ecspi1:2|ecspi1:3|esdhc1|esdhc2|esdhc3|esdhc4 [noreset]
bmp     - manipulate BMP image data
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory  # 从内存某处启动
bootp   - boot image via network using BOOTP/TFTP protocol      # 通过网络协议启动，走BOOTP/TFTP协议
bootz   - boot Linux zImage image from memory  # 从内存启动linux的内核 zImage
clocks  - display clocks  
clrlogo - fill the boot logo area with black
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
dcache  - enable or disable data cache
dhcp    - boot image via network using DHCP/TFTP protocol
dm      - Driver model low level access
echo    - echo args to console
editenv - edit environment variable
env     - environment handling commands
erase   - erase FLASH memory
exit    - exit script
false   - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
fatsize - determine a file's size
fdt     - flattened device tree utility commands
flinfo  - print FLASH memory information
fuse    - Fuse sub-system
go      - start application at address 'addr'
help    - print command description/usage
i2c     - I2C sub-system
icache  - enable or disable instruction cache
iminfo  - print header information for application image
imxtract- extract a part of a multi-image
itest   - return true/false on integer compare
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loadx   - load binary file over serial line (xmodem mode)
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
md      - memory display
mdio    - MDIO utility commands
mii     - MII utility commands
mm      - memory modify (auto-incrementing address)
mmc     - MMC sub system
mmcinfo - display MMC info
mtest   - simple RAM read/write test
mw      - memory write (fill)
nand    - NAND sub-system
nboot   - boot from NAND device
nfs     - boot image via network using NFS protocol
nm      - memory modify (constant address)
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
protect - enable or disable FLASH write protection
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
showvar - print local hushshell variables
sleep   - delay execution for some time
source  - run script from memory
test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
true    - do nothing, successfully
usb     - USB sub-system
usbboot - boot from USB device
version - print monitor, compiler and linker version

bdinfo 打印板级相关信息

=> bdinfo 
arch_number = 0x00000000
boot_params = 0x80000100
DRAM bank   = 0x00000000
-> start    = 0x80000000
-> size     = 0x10000000
eth0name    = FEC0
ethaddr     = (not set)
current eth = FEC0
ip_addr     = <NULL>
baudrate    = 115200 bps
TLB addr    = 0x8FFF0000
relocaddr   = 0x8FF4E000
reloc off   = 0x0874E000
irq_sp      = 0x8EF2DEA0
sp start    = 0x8EF2DE90
FB base     = 0x00000000

clocks 显示主要时钟

=> clocks 
PLL_SYS         792 MHz
PLL_BUS         528 MHz
PLL_OTG         480 MHz
PLL_NET          50 MHz

IPG           66000 kHz
UART          80000 kHz
AHB          132000 kHz
AXI          198000 kHz
DDR          396000 kHz
USDHC1       198000 kHz
USDHC2       198000 kHz
USDHC3       396000 kHz
USDHC4       396000 kHz
EMI SLOW      99000 kHz
IPG PERCLK    66000 kHz

coninfo print console devices and information

=> coninfo
List of available devices:
vga      80000002 S.O 
serial   80000003 SIO stdin stdout stderr 
nulldev  80000003 SIO 
mxc_serial 00000003 .IO