arm目标板开启telnet功能

arm目标板开启telnet功能

arm目标板开启telnet功能 2009-06-30 23:53

使用的是busybox1.11.1在busybox1.11.1目录下面执行make menuconfig.

在Busybox Settings--->

                General Configuration--->

                              [*] Use the devpts filesystem for Unix98 PTYs

在Networking Utilities--->

| |                         [*] telnet                                                                                       | |
| |                         [*]   Pass TERM type to remote host                                            | |
| |                         [*]   Pass USER type to remote host                                             | |
| |                         [*] telnetd                                                                                      | |
| |                         [*]   Support standalone telnetd (not inetd only)

进入到linux2.6.24目录下面.

Device Drivers --->

            Character devices-->

                    [*] Legacy (BSD) PTY support                                                                                  
                   (8) Maximum number of legacy PTY in use   此数字可以改

在板子上执行:

mkdir /dev/pts                                                                                                                                                    
mount -t devpts devpts /dev/pts

telnetd

也可以放在/etc/init.d/rcS里面.这样一开机就可以自动运行了.

到此为止,就可以用电脑telnet目标板了.

以下网上要做的步骤但我没有做,可以参考:

创建设备:        mknod ptmx c 5 2        chmod 777 ptmx