工具的链接https://blog.csdn.net/doubledong1994/article/details/104410638
https://github.com/doubledong94/android-source-reader
以函数android.view.ViewRootImpl.performTraversals:::为例
工具中对函数的索引方式就是类全名+函数名+参数类型名，下面是这个函数的代码（请快速滑过）
private void performTraversals() {
// cache mView since it is used so much below...
final View host = mView;
if (DBG) {
System.out.println("======================================");
System.out.println("performTraversals");
host.debug();
}
if (host == null || !mAdded)
return;
mIsInTraversal = true;
mWillDrawSoon = true;
boolean windowSizeMayChange = false;
boolean newSurface = false;
boolean surfaceChanged = false;
WindowManager.LayoutParams lp = mWindowAttributes;
int desiredWindowWidth;
int desiredWindowHeight;
final int viewVisibility = getHostVisibility();
final boolean viewVisibilityChanged = !mFirst
&& (mViewVisibility != viewVisibility || mNewSurfaceNeeded);
final boolean viewUserVisibilityChanged = !mFirst &&
((mViewVisibility == View.VISIBLE) != (viewVisibility == View.VISIBLE));
WindowManager.LayoutParams params = null;
if (mWindowAttributesChanged) {
mWindowAttributesChanged = false;
surfaceChanged = true;
params = lp;
}
CompatibilityInfo compatibilityInfo =
mDisplay.getDisplayAdjustments().getCompatibilityInfo();
if (compatibilityInfo.supportsScreen() == mLastInCompatMode) {
params = lp;
mFullRedrawNeeded = true;
mLayoutRequested = true;
if (mLastInCompatMode) {
params.privateFlags &= ~WindowManager.LayoutParams.PRIVATE_FLAG_COMPATIBLE_WINDOW;
mLastInCompatMode = false;
} else {
params.privateFlags |= WindowManager.LayoutParams.PRIVATE_FLAG_COMPATIBLE_WINDOW;
mLastInCompatMode = true;
}
}
mWindowAttributesChangesFlag = 0;
Rect frame = mWinFrame;
if (mFirst) {
mFullRedrawNeeded = true;
mLayoutRequested = true;
if (shouldUseDisplaySize(lp)) {
// NOTE -- system code, won't try to do compat mode.
Point size = new Point();
mDisplay.getRealSize(size);
desiredWindowWidth = size.x;
desiredWindowHeight = size.y;
} else {
Configuration config = mContext.getResources().getConfiguration();
desiredWindowWidth = dipToPx(config.screenWidthDp);
desiredWindowHeight = dipToPx(config.screenHeightDp);
}
// We used to use the following condition to choose 32 bits drawing caches:
// PixelFormat.hasAlpha(lp.format) || lp.format == PixelFormat.RGBX_8888
// However, windows are now always 32 bits by default, so choose 32 bits
mAttachInfo.mUse32BitDrawingCache = true;
mAttachInfo.mHasWindowFocus = false;
mAttachInfo.mWindowVisibility = viewVisibility;
mAttachInfo.mRecomputeGlobalAttributes = false;
mLastConfiguration.setTo(host.getResources().getConfiguration());
mLastSystemUiVisibility = mAttachInfo.mSystemUiVisibility;
// Set the layout direction if it has not been set before (inherit is the default)
if (mViewLayoutDirectionInitial == View.LAYOUT_DIRECTION_INHERIT) {
host.setLayoutDirection(mLastConfiguration.getLayoutDirection());
}
host.dispatchAttachedToWindow(mAttachInfo, 0);
mAttachInfo.mTreeObserver.dispatchOnWindowAttachedChange(true);
dispatchApplyInsets(host);
//Log.i(mTag, "Screen on initialized: " + attachInfo.mKeepScreenOn);
} else {
desiredWindowWidth = frame.width();
desiredWindowHeight = frame.height();
if (desiredWindowWidth != mWidth || desiredWindowHeight != mHeight) {
if (DEBUG_ORIENTATION) Log.v(mTag, "View " + host + " resized to: " + frame);
mFullRedrawNeeded = true;
mLayoutRequested = true;
windowSizeMayChange = true;
}
}
if (viewVisibilityChanged) {
mAttachInfo.mWindowVisibility = viewVisibility;
host.dispatchWindowVisibilityChanged(viewVisibility);
if (viewUserVisibilityChanged) {
host.dispatchVisibilityAggregated(viewVisibility == View.VISIBLE);
}
if (viewVisibility != View.VISIBLE || mNewSurfaceNeeded) {
endDragResizing();
destroyHardwareResources();
}
if (viewVisibility == View.GONE) {
// After making a window gone, we will count it as being
// shown for the first time the next time it gets focus.
mHasHadWindowFocus = false;
}
}
// Non-visible windows can't hold accessibility focus.
if (mAttachInfo.mWindowVisibility != View.VISIBLE) {
host.clearAccessibilityFocus();
}
// Execute enqueued actions on every traversal in case a detached view enqueued an action
getRunQueue().executeActions(mAttachInfo.mHandler);
boolean insetsChanged = false;
boolean layoutRequested = mLayoutRequested && (!mStopped || mReportNextDraw);
if (layoutRequested) {
final Resources res = mView.getContext().getResources();
if (mFirst) {
// make sure touch mode code executes by setting cached value
// to opposite of the added touch mode.
mAttachInfo.mInTouchMode = !mAddedTouchMode;
ensureTouchModeLocally(mAddedTouchMode);
} else {
if (!mPendingOverscanInsets.equals(mAttachInfo.mOverscanInsets)) {
insetsChanged = true;
}
if (!mPendingContentInsets.equals(mAttachInfo.mContentInsets)) {
insetsChanged = true;
}
if (!mPendingStableInsets.equals(mAttachInfo.mStableInsets)) {
insetsChanged = true;
}
if (!mPendingVisibleInsets.equals(mAttachInfo.mVisibleInsets)) {
mAttachInfo.mVisibleInsets.set(mPendingVisibleInsets);
if (DEBUG_LAYOUT) Log.v(mTag, "Visible insets changing to: "
+ mAttachInfo.mVisibleInsets);
}
if (!mPendingOutsets.equals(mAttachInfo.mOutsets)) {
insetsChanged = true;
}
if (mPendingAlwaysConsumeNavBar != mAttachInfo.mAlwaysConsumeNavBar) {
insetsChanged = true;
}
if (lp.width == ViewGroup.LayoutParams.WRAP_CONTENT
|| lp.height == ViewGroup.LayoutParams.WRAP_CONTENT) {
windowSizeMayChange = true;
if (shouldUseDisplaySize(lp)) {
// NOTE -- system code, won't try to do compat mode.
Point size = new Point();
mDisplay.getRealSize(size);
desiredWindowWidth = size.x;
desiredWindowHeight = size.y;
} else {
Configuration config = res.getConfiguration();
desiredWindowWidth = dipToPx(config.screenWidthDp);
desiredWindowHeight = dipToPx(config.screenHeightDp);
}
}
}
// Ask host how big it wants to be
windowSizeMayChange |= measureHierarchy(host, lp, res,
desiredWindowWidth, desiredWindowHeight);
}
if (collectViewAttributes()) {
params = lp;
}
if (mAttachInfo.mForceReportNewAttributes) {
mAttachInfo.mForceReportNewAttributes = false;
params = lp;
}
if (mFirst || mAttachInfo.mViewVisibilityChanged) {
mAttachInfo.mViewVisibilityChanged = false;
int resizeMode = mSoftInputMode &
WindowManager.LayoutParams.SOFT_INPUT_MASK_ADJUST;
// If we are in auto resize mode, then we need to determine
// what mode to use now.
if (resizeMode == WindowManager.LayoutParams.SOFT_INPUT_ADJUST_UNSPECIFIED) {
final int N = mAttachInfo.mScrollContainers.size();
for (int i=0; i<N; i++) {
if (mAttachInfo.mScrollContainers.get(i).isShown()) {
resizeMode = WindowManager.LayoutParams.SOFT_INPUT_ADJUST_RESIZE;
}
}
if (resizeMode == 0) {
resizeMode = WindowManager.LayoutParams.SOFT_INPUT_ADJUST_PAN;
}
if ((lp.softInputMode &
WindowManager.LayoutParams.SOFT_INPUT_MASK_ADJUST) != resizeMode) {
lp.softInputMode = (lp.softInputMode &
~WindowManager.LayoutParams.SOFT_INPUT_MASK_ADJUST) |
resizeMode;
params = lp;
}
}
}
if (params != null) {
if ((host.mPrivateFlags & View.PFLAG_REQUEST_TRANSPARENT_REGIONS) != 0) {
if (!PixelFormat.formatHasAlpha(params.format)) {
params.format = PixelFormat.TRANSLUCENT;
}
}
mAttachInfo.mOverscanRequested = (params.flags
& WindowManager.LayoutParams.FLAG_LAYOUT_IN_OVERSCAN) != 0;
}
if (mApplyInsetsRequested) {
mApplyInsetsRequested = false;
mLastOverscanRequested = mAttachInfo.mOverscanRequested;
dispatchApplyInsets(host);
if (mLayoutRequested) {
// Short-circuit catching a new layout request here, so
// we don't need to go through two layout passes when things
// change due to fitting system windows, which can happen a lot.
windowSizeMayChange |= measureHierarchy(host, lp,
mView.getContext().getResources(),
desiredWindowWidth, desiredWindowHeight);
}
}
if (layoutRequested) {
// Clear this now, so that if anything requests a layout in the
// rest of this function we will catch it and re-run a full
// layout pass.
mLayoutRequested = false;
}
boolean windowShouldResize = layoutRequested && windowSizeMayChange
&& ((mWidth != host.getMeasuredWidth() || mHeight != host.getMeasuredHeight())
|| (lp.width == ViewGroup.LayoutParams.WRAP_CONTENT &&
frame.width() < desiredWindowWidth && frame.width() != mWidth)
|| (lp.height == ViewGroup.LayoutParams.WRAP_CONTENT &&
frame.height() < desiredWindowHeight && frame.height() != mHeight));
windowShouldResize |= mDragResizing && mResizeMode == RESIZE_MODE_FREEFORM;
// If the activity was just relaunched, it might have unfrozen the task bounds (while
// relaunching), so we need to force a call into window manager to pick up the latest
// bounds.
windowShouldResize |= mActivityRelaunched;
// Determine whether to compute insets.
// If there are no inset listeners remaining then we may still need to compute
// insets in case the old insets were non-empty and must be reset.
final boolean computesInternalInsets =
mAttachInfo.mTreeObserver.hasComputeInternalInsetsListeners()
|| mAttachInfo.mHasNonEmptyGivenInternalInsets;
boolean insetsPending = false;
int relayoutResult = 0;
boolean updatedConfiguration = false;
final int surfaceGenerationId = mSurface.getGenerationId();
final boolean isViewVisible = viewVisibility == View.VISIBLE;
if (mFirst || windowShouldResize || insetsChanged ||
viewVisibilityChanged || params != null || mForceNextWindowRelayout) {
mForceNextWindowRelayout = false;
if (isViewVisible) {
// If this window is giving internal insets to the window
// manager, and it is being added or changing its visibility,
// then we want to first give the window manager "fake"
// insets to cause it to effectively ignore the content of
// the window during layout. This avoids it briefly causing
// other windows to resize/move based on the raw frame of the
// window, waiting until we can finish laying out this window
// and get back to the window manager with the ultimately
// computed insets.
insetsPending = computesInternalInsets && (mFirst || viewVisibilityChanged);
}
if (mSurfaceHolder != null) {
mSurfaceHolder.mSurfaceLock.lock();
mDrawingAllowed = true;
}
boolean hwInitialized = false;
boolean contentInsetsChanged = false;
boolean hadSurface = mSurface.isValid();
try {
if (DEBUG_LAYOUT) {
Log.i(mTag, "host=w:" + host.getMeasuredWidth() + ", h:" +
host.getMeasuredHeight() + ", params=" + params);
}
if (mAttachInfo.mHardwareRenderer != null) {
// relayoutWindow may decide to destroy mSurface. As that decision
// happens in WindowManager service, we need to be defensive here
// and stop using the surface in case it gets destroyed.
if (mAttachInfo.mHardwareRenderer.pauseSurface(mSurface)) {
// Animations were running so we need to push a frame
// to resume them
mDirty.set(0, 0, mWidth, mHeight);
}
mChoreographer.mFrameInfo.addFlags(FrameInfo.FLAG_WINDOW_LAYOUT_CHANGED);
}
relayoutResult = relayoutWindow(params, viewVisibility, insetsPending);
if (DEBUG_LAYOUT) Log.v(mTag, "relayout: frame=" + frame.toShortString()
+ " overscan=" + mPendingOverscanInsets.toShortString()
+ " content=" + mPendingContentInsets.toShortString()
+ " visible=" + mPendingVisibleInsets.toShortString()
+ " visible=" + mPendingStableInsets.toShortString()
+ " outsets=" + mPendingOutsets.toShortString()
+ " surface=" + mSurface);
if (mPendingConfiguration.seq != 0) {
if (DEBUG_CONFIGURATION) Log.v(mTag, "Visible with new config: "
+ mPendingConfiguration);
updateConfiguration(new Configuration(mPendingConfiguration), !mFirst);
mPendingConfiguration.seq = 0;
updatedConfiguration = true;
}
final boolean overscanInsetsChanged = !mPendingOverscanInsets.equals(
mAttachInfo.mOverscanInsets);
contentInsetsChanged = !mPendingContentInsets.equals(
mAttachInfo.mContentInsets);
final boolean visibleInsetsChanged = !mPendingVisibleInsets.equals(
mAttachInfo.mVisibleInsets);
final boolean stableInsetsChanged = !mPendingStableInsets.equals(
mAttachInfo.mStableInsets);
final boolean outsetsChanged = !mPendingOutsets.equals(mAttachInfo.mOutsets);
final boolean surfaceSizeChanged = (relayoutResult
& WindowManagerGlobal.RELAYOUT_RES_SURFACE_RESIZED) != 0;
final boolean alwaysConsumeNavBarChanged =
mPendingAlwaysConsumeNavBar != mAttachInfo.mAlwaysConsumeNavBar;
if (contentInsetsChanged) {
mAttachInfo.mContentInsets.set(mPendingContentInsets);
if (DEBUG_LAYOUT) Log.v(mTag, "Content insets changing to: "
+ mAttachInfo.mContentInsets);
}
if (overscanInsetsChanged) {
mAttachInfo.mOverscanInsets.set(mPendingOverscanInsets);
if (DEBUG_LAYOUT) Log.v(mTag, "Overscan insets changing to: "
+ mAttachInfo.mOverscanInsets);
// Need to relayout with content insets.
contentInsetsChanged = true;
}
if (stableInsetsChanged) {
mAttachInfo.mStableInsets.set(mPendingStableInsets);
if (DEBUG_LAYOUT) Log.v(mTag, "Decor insets changing to: "
+ mAttachInfo.mStableInsets);
// Need to relayout with content insets.
contentInsetsChanged = true;
}
if (alwaysConsumeNavBarChanged) {
mAttachInfo.mAlwaysConsumeNavBar = mPendingAlwaysConsumeNavBar;
contentInsetsChanged = true;
}
if (contentInsetsChanged || mLastSystemUiVisibility !=
mAttachInfo.mSystemUiVisibility || mApplyInsetsRequested
|| mLastOverscanRequested != mAttachInfo.mOverscanRequested
|| outsetsChanged) {
mLastSystemUiVisibility = mAttachInfo.mSystemUiVisibility;
mLastOverscanRequested = mAttachInfo.mOverscanRequested;
mAttachInfo.mOutsets.set(mPendingOutsets);
mApplyInsetsRequested = false;
dispatchApplyInsets(host);
}
if (visibleInsetsChanged) {
mAttachInfo.mVisibleInsets.set(mPendingVisibleInsets);
if (DEBUG_LAYOUT) Log.v(mTag, "Visible insets changing to: "
+ mAttachInfo.mVisibleInsets);
}
if (!hadSurface) {
if (mSurface.isValid()) {
// If we are creating a new surface, then we need to
// completely redraw it. Also, when we get to the
// point of drawing it we will hold off and schedule
// a new traversal instead. This is so we can tell the
// window manager about all of the windows being displayed
// before actually drawing them, so it can display then
// all at once.
newSurface = true;
mFullRedrawNeeded = true;
mPreviousTransparentRegion.setEmpty();
// Only initialize up-front if transparent regions are not
// requested, otherwise defer to see if the entire window
// will be transparent
if (mAttachInfo.mHardwareRenderer != null) {
try {
hwInitialized = mAttachInfo.mHardwareRenderer.initialize(
mSurface);
if (hwInitialized && (host.mPrivateFlags
& View.PFLAG_REQUEST_TRANSPARENT_REGIONS) == 0) {
// Don't pre-allocate if transparent regions
// are requested as they may not be needed
mSurface.allocateBuffers();
}
} catch (OutOfResourcesException e) {
handleOutOfResourcesException(e);
return;
}
}
}
} else if (!mSurface.isValid()) {
// If the surface has been removed, then reset the scroll
// positions.
if (mLastScrolledFocus != null) {
mLastScrolledFocus.clear();
}
mScrollY = mCurScrollY = 0;
if (mView instanceof RootViewSurfaceTaker) {
((RootViewSurfaceTaker) mView).onRootViewScrollYChanged(mCurScrollY);
}
if (mScroller != null) {
mScroller.abortAnimation();
}
// Our surface is gone
if (mAttachInfo.mHardwareRenderer != null &&
mAttachInfo.mHardwareRenderer.isEnabled()) {
mAttachInfo.mHardwareRenderer.destroy();
}
} else if ((surfaceGenerationId != mSurface.getGenerationId()
|| surfaceSizeChanged)
&& mSurfaceHolder == null
&& mAttachInfo.mHardwareRenderer != null) {
mFullRedrawNeeded = true;
try {
// Need to do updateSurface (which leads to CanvasContext::setSurface and
// re-create the EGLSurface) if either the Surface changed (as indicated by
// generation id), or WindowManager changed the surface size. The latter is
// because on some chips, changing the consumer side's BufferQueue size may
// not take effect immediately unless we create a new EGLSurface.
// Note that frame size change doesn't always imply surface size change (eg.
// drag resizing uses fullscreen surface), need to check surfaceSizeChanged
// flag from WindowManager.
mAttachInfo.mHardwareRenderer.updateSurface(mSurface);
} catch (OutOfResourcesException e) {
handleOutOfResourcesException(e);
return;
}
}
final boolean freeformResizing = (relayoutResult
& WindowManagerGlobal.RELAYOUT_RES_DRAG_RESIZING_FREEFORM) != 0;
final boolean dockedResizing = (relayoutResult
& WindowManagerGlobal.RELAYOUT_RES_DRAG_RESIZING_DOCKED) != 0;
final boolean dragResizing = freeformResizing || dockedResizing;
if (mDragResizing != dragResizing) {
if (dragResizing) {
mResizeMode = freeformResizing
? RESIZE_MODE_FREEFORM
: RESIZE_MODE_DOCKED_DIVIDER;
startDragResizing(mPendingBackDropFrame,
mWinFrame.equals(mPendingBackDropFrame), mPendingVisibleInsets,
mPendingStableInsets, mResizeMode);
} else {
// We shouldn't come here, but if we come we should end the resize.
endDragResizing();
}
}
if (!USE_MT_RENDERER) {
if (dragResizing) {
mCanvasOffsetX = mWinFrame.left;
mCanvasOffsetY = mWinFrame.top;
} else {
mCanvasOffsetX = mCanvasOffsetY = 0;
}
}
} catch (RemoteException e) {
}
if (DEBUG_ORIENTATION) Log.v(
TAG, "Relayout returned: frame=" + frame + ", surface=" + mSurface);
mAttachInfo.mWindowLeft = frame.left;
mAttachInfo.mWindowTop = frame.top;
// !!FIXME!! This next section handles the case where we did not get the
// window size we asked for. We should avoid this by getting a maximum size from
// the window session beforehand.
if (mWidth != frame.width() || mHeight != frame.height()) {
mWidth = frame.width();
mHeight = frame.height();
}
if (mSurfaceHolder != null) {
// The app owns the surface; tell it about what is going on.
if (mSurface.isValid()) {
// XXX .copyFrom() doesn't work!
//mSurfaceHolder.mSurface.copyFrom(mSurface);
mSurfaceHolder.mSurface = mSurface;
}
mSurfaceHolder.setSurfaceFrameSize(mWidth, mHeight);
mSurfaceHolder.mSurfaceLock.unlock();
if (mSurface.isValid()) {
if (!hadSurface) {
mSurfaceHolder.ungetCallbacks();
mIsCreating = true;
mSurfaceHolderCallback.surfaceCreated(mSurfaceHolder);
SurfaceHolder.Callback callbacks[] = mSurfaceHolder.getCallbacks();
if (callbacks != null) {
for (SurfaceHolder.Callback c : callbacks) {
c.surfaceCreated(mSurfaceHolder);
}
}
surfaceChanged = true;
}
if (surfaceChanged || surfaceGenerationId != mSurface.getGenerationId()) {
mSurfaceHolderCallback.surfaceChanged(mSurfaceHolder,
lp.format, mWidth, mHeight);
SurfaceHolder.Callback callbacks[] = mSurfaceHolder.getCallbacks();
if (callbacks != null) {
for (SurfaceHolder.Callback c : callbacks) {
c.surfaceChanged(mSurfaceHolder, lp.format,
mWidth, mHeight);
}
}
}
mIsCreating = false;
} else if (hadSurface) {
mSurfaceHolder.ungetCallbacks();
SurfaceHolder.Callback callbacks[] = mSurfaceHolder.getCallbacks();
mSurfaceHolderCallback.surfaceDestroyed(mSurfaceHolder);
if (callbacks != null) {
for (SurfaceHolder.Callback c : callbacks) {
c.surfaceDestroyed(mSurfaceHolder);
}
}
mSurfaceHolder.mSurfaceLock.lock();
try {
mSurfaceHolder.mSurface = new Surface();
} finally {
mSurfaceHolder.mSurfaceLock.unlock();
}
}
}
final ThreadedRenderer hardwareRenderer = mAttachInfo.mHardwareRenderer;
if (hardwareRenderer != null && hardwareRenderer.isEnabled()) {
if (hwInitialized
|| mWidth != hardwareRenderer.getWidth()
|| mHeight != hardwareRenderer.getHeight()
|| mNeedsHwRendererSetup) {
hardwareRenderer.setup(mWidth, mHeight, mAttachInfo,
mWindowAttributes.surfaceInsets);
mNeedsHwRendererSetup = false;
}
}
if (!mStopped || mReportNextDraw) {
boolean focusChangedDueToTouchMode = ensureTouchModeLocally(
(relayoutResult&WindowManagerGlobal.RELAYOUT_RES_IN_TOUCH_MODE) != 0);
if (focusChangedDueToTouchMode || mWidth != host.getMeasuredWidth()
|| mHeight != host.getMeasuredHeight() || contentInsetsChanged ||
updatedConfiguration) {
int childWidthMeasureSpec = getRootMeasureSpec(mWidth, lp.width);
int childHeightMeasureSpec = getRootMeasureSpec(mHeight, lp.height);
if (DEBUG_LAYOUT) Log.v(mTag, "Ooops, something changed! mWidth="
+ mWidth + " measuredWidth=" + host.getMeasuredWidth()
+ " mHeight=" + mHeight
+ " measuredHeight=" + host.getMeasuredHeight()
+ " coveredInsetsChanged=" + contentInsetsChanged);
// Ask host how big it wants to be
performMeasure(childWidthMeasureSpec, childHeightMeasureSpec);
// Implementation of weights from WindowManager.LayoutParams
// We just grow the dimensions as needed and re-measure if
// needs be
int width = host.getMeasuredWidth();
int height = host.getMeasuredHeight();
boolean measureAgain = false;
if (lp.horizontalWeight > 0.0f) {
width += (int) ((mWidth - width) * lp.horizontalWeight);
childWidthMeasureSpec = MeasureSpec.makeMeasureSpec(width,
MeasureSpec.EXACTLY);
measureAgain = true;
}
if (lp.verticalWeight > 0.0f) {
height += (int) ((mHeight - height) * lp.verticalWeight);
childHeightMeasureSpec = MeasureSpec.makeMeasureSpec(height,
MeasureSpec.EXACTLY);
measureAgain = true;
}
if (measureAgain) {
if (DEBUG_LAYOUT) Log.v(mTag,
"And hey let's measure once more: width=" + width
+ " height=" + height);
performMeasure(childWidthMeasureSpec, childHeightMeasureSpec);
}
layoutRequested = true;
}
}
} else {
// Not the first pass and no window/insets/visibility change but the window
// may have moved and we need check that and if so to update the left and right
// in the attach info. We translate only the window frame since on window move
// the window manager tells us only for the new frame but the insets are the
// same and we do not want to translate them more than once.
maybeHandleWindowMove(frame);
}
final boolean didLayout = layoutRequested && (!mStopped || mReportNextDraw);
boolean triggerGlobalLayoutListener = didLayout
|| mAttachInfo.mRecomputeGlobalAttributes;
if (didLayout) {
performLayout(lp, mWidth, mHeight);
// By this point all views have been sized and positioned
// We can compute the transparent area
if ((host.mPrivateFlags & View.PFLAG_REQUEST_TRANSPARENT_REGIONS) != 0) {
// start out transparent
// TODO: AVOID THAT CALL BY CACHING THE RESULT?
host.getLocationInWindow(mTmpLocation);
mTransparentRegion.set(mTmpLocation[0], mTmpLocation[1],
mTmpLocation[0] + host.mRight - host.mLeft,
mTmpLocation[1] + host.mBottom - host.mTop);
host.gatherTransparentRegion(mTransparentRegion);
if (mTranslator != null) {
mTranslator.translateRegionInWindowToScreen(mTransparentRegion);
}
if (!mTransparentRegion.equals(mPreviousTransparentRegion)) {
mPreviousTransparentRegion.set(mTransparentRegion);
mFullRedrawNeeded = true;
// reconfigure window manager
try {
mWindowSession.setTransparentRegion(mWindow, mTransparentRegion);
} catch (RemoteException e) {
}
}
}
if (DBG) {
System.out.println("======================================");
System.out.println("performTraversals -- after setFrame");
host.debug();
}
}
if (triggerGlobalLayoutListener) {
mAttachInfo.mRecomputeGlobalAttributes = false;
mAttachInfo.mTreeObserver.dispatchOnGlobalLayout();
}
if (computesInternalInsets) {
// Clear the original insets.
final ViewTreeObserver.InternalInsetsInfo insets = mAttachInfo.mGivenInternalInsets;
insets.reset();
// Compute new insets in place.
mAttachInfo.mTreeObserver.dispatchOnComputeInternalInsets(insets);
mAttachInfo.mHasNonEmptyGivenInternalInsets = !insets.isEmpty();
// Tell the window manager.
if (insetsPending || !mLastGivenInsets.equals(insets)) {
mLastGivenInsets.set(insets);
// Translate insets to screen coordinates if needed.
final Rect contentInsets;
final Rect visibleInsets;
final Region touchableRegion;
if (mTranslator != null) {
contentInsets = mTranslator.getTranslatedContentInsets(insets.contentInsets);
visibleInsets = mTranslator.getTranslatedVisibleInsets(insets.visibleInsets);
touchableRegion = mTranslator.getTranslatedTouchableArea(insets.touchableRegion);
} else {
contentInsets = insets.contentInsets;
visibleInsets = insets.visibleInsets;
touchableRegion = insets.touchableRegion;
}
try {
mWindowSession.setInsets(mWindow, insets.mTouchableInsets,
contentInsets, visibleInsets, touchableRegion);
} catch (RemoteException e) {
}
}
}
if (mFirst) {
// handle first focus request
if (DEBUG_INPUT_RESIZE) Log.v(mTag, "First: mView.hasFocus()="
+ mView.hasFocus());
if (mView != null) {
if (!mView.hasFocus()) {
mView.requestFocus(View.FOCUS_FORWARD);
if (DEBUG_INPUT_RESIZE) Log.v(mTag, "First: requested focused view="
+ mView.findFocus());
} else {
if (DEBUG_INPUT_RESIZE) Log.v(mTag, "First: existing focused view="
+ mView.findFocus());
}
}
}
final boolean changedVisibility = (viewVisibilityChanged || mFirst) && isViewVisible;
final boolean hasWindowFocus = mAttachInfo.mHasWindowFocus && isViewVisible;
final boolean regainedFocus = hasWindowFocus && mLostWindowFocus;
if (regainedFocus) {
mLostWindowFocus = false;
} else if (!hasWindowFocus && mHadWindowFocus) {
mLostWindowFocus = true;
}
if (changedVisibility || regainedFocus) {
// Toasts are presented as notifications - don't present them as windows as well
boolean isToast = (mWindowAttributes == null) ? false
: (mWindowAttributes.type == WindowManager.LayoutParams.TYPE_TOAST);
if (!isToast) {
host.sendAccessibilityEvent(AccessibilityEvent.TYPE_WINDOW_STATE_CHANGED);
}
}
mFirst = false;
mWillDrawSoon = false;
mNewSurfaceNeeded = false;
mActivityRelaunched = false;
mViewVisibility = viewVisibility;
mHadWindowFocus = hasWindowFocus;
if (hasWindowFocus && !isInLocalFocusMode()) {
final boolean imTarget = WindowManager.LayoutParams
.mayUseInputMethod(mWindowAttributes.flags);
if (imTarget != mLastWasImTarget) {
mLastWasImTarget = imTarget;
InputMethodManager imm = InputMethodManager.peekInstance();
if (imm != null && imTarget) {
imm.onPreWindowFocus(mView, hasWindowFocus);
imm.onPostWindowFocus(mView, mView.findFocus(),
mWindowAttributes.softInputMode,
!mHasHadWindowFocus, mWindowAttributes.flags);
}
}
}
// Remember if we must report the next draw.
if ((relayoutResult & WindowManagerGlobal.RELAYOUT_RES_FIRST_TIME) != 0) {
mReportNextDraw = true;
}
boolean cancelDraw = mAttachInfo.mTreeObserver.dispatchOnPreDraw() || !isViewVisible;
if (!cancelDraw && !newSurface) {
if (mPendingTransitions != null && mPendingTransitions.size() > 0) {
for (int i = 0; i < mPendingTransitions.size(); ++i) {
mPendingTransitions.get(i).startChangingAnimations();
}
mPendingTransitions.clear();
}
performDraw();
} else {
if (isViewVisible) {
// Try again
scheduleTraversals();
} else if (mPendingTransitions != null && mPendingTransitions.size() > 0) {
for (int i = 0; i < mPendingTransitions.size(); ++i) {
mPendingTransitions.get(i).endChangingAnimations();
}
mPendingTransitions.clear();
}
}
mIsInTraversal = false;
}函数很长，直接去读有一个问题，那就是局部变量，有些局部变量依赖属性的值或者函数的返回值，读取局部变量就是读取了属性值和函数的返回值，但对局部变量的赋值与使用往往不在一起，如果函数长局部变量多，那很容易忘记哪个局部变量依赖哪些属性，因此我写了这个工具，不仅可以把局部变量的赋值与使用放在一起看，还可以跨过局部变量，直接看属性与属性的关系，函数与函数的关系。
工具的使用分成这么几个部分
-
函数的结构
从这里能大概看出函数有多少个并列的条件语句，每个条件语句有多深，有几层循环嵌套。这个函数有24个并列的条件语句。 -
函数的特征
这个所谓的函数特征也就是函数所产生的各种函数调用与属性赋值的统计，可以点开查看详情。 -
对某个局部变量使用的跟踪
-
局部变量的依赖关系
-
函数的行为，下面列出的都函数 最终 要做的事情，其中间过程（局部变量的传递过程）已经被折叠在里面，如果要看函数行为的具体情况，可以点开看。
点开 performMeasure 函数，可以看到其中的每个参数最终是来自哪里，如 performMeasure 的 Paramter1 最终来自getRootMeasureSpec 和 makeMeasureSpec 两个函数。（childWidthMeasureSpec这个变量前面有一串数字用于定位，说明它是局部变量。）
-
将函数形成的调用赋值关系分块，分块的依据是语句与局部变量的依赖关系。
-
当然，你可以直接在这个工具里面看到源码。
每个读写关系前面的数字和后面用逗号与冒号分开的数字都是用来定位的
前面的数字只是线性的定位，标记这个关系发生在第几个语句（并不是第几行，用行定位代码的方式其它阅读器已经做的很好，不需要我再做了），目的只是排序
后面的数字是对函数中条件分支形成的树状结构的定位，a:b:c 的意思是在a条件分支中的b条件分支中的c条件分支，a,b,c 的意思是第 a 个 if 语句中的第 b 个分支，c 如果是 1 表示这个分支是最后一个分支，而且是else{.......}这种闭合的分支。（中的是说 if 语句的嵌套关系，第是说 if 语句的并列关系和条件分支的并列关系）
773
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
