10GBASE-T Copper Transceiver Installation Guide

最新推荐文章于 2024-10-14 10:57:19 发布

fsandrewyi

最新推荐文章于 2024-10-14 10:57:19 发布

阅读量760

点赞数

本文链接：https://blog.csdn.net/fsandrewyi/article/details/78460472

版权

本文提供了10GBASE-T铜缆收发器的安装和移除步骤，适用于需要10吉比特以太网的Cat6a结构化布线。安装时要注意不要直视光纤收发器或电缆，避免激光损伤眼睛。安装过程包括小心取出收发器、对准端口插入并锁定，然后重启设备进行验证。移除时则需要先断开电缆，解锁后再慢慢取出并盖上防尘帽。

摘要由CSDN通过智能技术生成

10G SFP+ modules have been warmly welcomed by data center workers, enterprise network staff, and home network planner since 2006 when the specification was first published. As one protocol of 10GBASE SFP+, 10GBASE-T module provides the best solution for Cat6a structured cabling. During the process of using 10GBASE-T copper modules, installation and removing attach great importance to our safety. And thus, this passage would put emphasis on the installation and removing of 10GBASE-T copper module.

10GBASE-T Copper Transceiver

Designed for high speed communication links that require 10 gigabit Ethernet over Cat 6a/7 cable, the 10GBASE-T SFP+ copper transceiver module is the first SFP+ transceiver delivering 10Gb/s of communication for this type of media. Featured prominently in data center networks at 10Gb/s, the