ethernet eth0: Could not attach to PHY

报错：ethernet eth0: Could not attach to PHY

ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)

分析：

打印来源于：

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
945
946/**
947 * stmmac_init_phy - PHY initialization
948 * @dev: net device structure
949 * Description: it initializes the driver's PHY state, and attaches the PHY
950 * to the mac driver.
951 *  Return value:
952 *  0 on success
953 */
954static int stmmac_init_phy(struct net_device *dev)
955{
------------------------------------
967    if (priv->plat->phy_node) {
968        phydev = of_phy_connect(dev, priv->plat->phy_node,
969                    &stmmac_adjust_link, 0, interface);
970    } else {
971        snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
972             priv->plat->bus_id);
973
974        snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
975