<!-- /* Font Definitions */ @font-face {font-family:宋体; panose-1:2 1 6 0 3 1 1 1 1 1; mso-font-alt:SimSun; mso-font-charset:134; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:3 135135232 16 0 262145 0;} @font-face {font-family:"/@宋体"; panose-1:2 1 6 0 3 1 1 1 1 1; mso-font-charset:134; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:3 135135232 16 0 262145 0;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-parent:""; margin:0cm; margin-bottom:.0001pt; text-align:justify; text-justify:inter-ideograph; mso-pagination:none; font-size:10.5pt; mso-bidi-font-size:12.0pt; font-family:"Times New Roman"; mso-fareast-font-family:宋体; mso-font-kerning:1.0pt;} /* Page Definitions */ @page {mso-page-border-surround-header:no; mso-page-border-surround-footer:no;} @page Section1 {size:612.0pt 792.0pt; margin:72.0pt 90.0pt 72.0pt 90.0pt; mso-header-margin:36.0pt; mso-footer-margin:36.0pt; mso-paper-source:0;} div.Section1 {page:Section1;} /* List Definitions */ @list l0 {mso-list-id:430904897; mso-list-type:hybrid; mso-list-template-ids:-618749806 664535718 67698713 67698715 67698703 67698713 67698715 67698703 67698713 67698715;} @list l0:level1 {mso-level-number-format:japanese-counting; mso-level-text:%1、; mso-level-tab-stop:19.5pt; mso-level-number-position:left; margin-left:19.5pt; text-indent:-19.5pt;} ol {margin-bottom:0cm;} ul {margin-bottom:0cm;} -->
操作步骤:
一、 下载并安装虚拟网卡驱动程序(一般安装 Microsoft Virtual PC 2007 ,它自带虚拟网卡驱动)。
二、 绑定模拟器的网卡。启动模拟器,然后从模拟器的文件菜单中选择配置,在 “ 仿真程序属性 ” 对话框中切换到“网络”页,然后勾选 “ 启用 NE2000 PCMCIA 网络适配器并绑定到 ” 选项。
三、 配置模拟器网卡的参数。在模拟器内选择:开始-〉设置-〉连接-〉网卡,进入“配置网络适配器”。选择我的网卡连接到“默认 Internet 配置”,然后再选择 “NE2000 兼容 Ethernet 驱动程序 ” ,对网卡的 ip 、网关、 dns 进行具体配置。
四、 配置完成后,软重置模拟器,接下来就可以在主机中使用 ping 命令来测试与模拟器连通情况。
整个过程只需要上面这四步即可,不需要设置传输方式等操作。完成配置后,模拟器就有了一个固定ip ,局域网内的机器也可以访问到模拟器的这个ip 。通过这个ip ,只要模拟器的网关和dns 配置正确( 设置成和主机一样) ,就可以直接上网,而不再需要借助ActiveSync 了。