STM32L071 Flash写入的数据进行CRC-CCITT校验

Flash写入校验采用采用16位循环冗余校验码CRC-CCITT；

/*----------------------------------------------
--功能: 字节查表法求CRC

------------------------------------------------
-*/
unsigned int do_crc(unsigned char *ptr, unsigned int len) // 字节查表法求CRC
{
  unsigned char tda;
  unsigned int crc = 0;
  while (len-- != 0)
  {
    tda = (unsigned char)(crc / 256); // 以8 位二进制数暂存CRC 的高8 位
    crc <<= 8;                        // 左移8 位
    crc ^= crc_Table[tda ^ *ptr];     // 高字节和当前数据XOR 再查表
    ptr++;
  }
  return (crc);
}

//用户自定义代码区；

  /**********************************************
*功能    : crc校验
*修改    : 2004-12-07
*说明    :采用16位循环冗余校验码CRC-CCITT,其生成
          多项式为：G(x)= X16+X12+X5+1,能检测出所
          有的双错，奇数位错，突发长度不大于16的突
          发错，99.997％突发长度为17的突发错，和
          99.998％突发长度大于或等于18的突发错，
************************************************/

//unsigned int crc;          // CRC 码

const unsigned int crc_Table[256]=   //CRC表值
{0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0
};

uint8_t Flash_update_test(void)
{
      FLASH_EraseInitTypeDef EraseInitStruct;
    
    uint32_t uifalshdata1=0x5aa55aa5;
    //uint32_t uifalshdata2=0xffffffff;
    uint32_t PAGEError = 0;

    EraseInitStruct.TypeErase   = FLASH_TYPEERASE_PAGES;    // 刷除方式      
    EraseInitStruct.PageAddress = Flashdata_addr+USING_APPLICATIION_ADDR;    // 起始地址     
    EraseInitStruct.NbPages = 128;  //要删除的页数；

    HAL_FLASH_Unlock();
    
    __disable_irq();
    HAL_FLASHEx_Erase(&EraseInitStruct, &PAGEError);
    if (PAGEError != 0xFFFFFFFF)
        {
            HAL_FLASHEx_Erase(&EraseInitStruct, &PAGEError);
    }
    
    if(HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD,USING_APPLICATIION_ADDR ,uifalshdata1 )!=HAL_OK)
        {
            HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD,USING_APPLICATIION_ADDR ,uifalshdata1);
    }
        __enable_irq();
        
    HAL_FLASH_Lock();
    
    return (0);
}
 

uint8_t Flash_update_Page(uint8_t *UpdateBuffer,uint8_t PageIndex,uint8_t *BufferLen)
{
      FLASH_EraseInitTypeDef EraseInitStruct;

    uint8_t ucStatus=0;
    //uint32_t uifalshdata1=0x5aa55aa5;
    //uint32_t uifalshdata2=0xffffffff;
    uint32_t PAGEError = 0;
    uint32_t uiUpdata[FLASH_PAGE_SIZE/4]={0};
    uint32_t pagelen;
    //uint32_t WritePagelen;
    
    uint32_t flash_offset = (PageIndex - 1) * FLASH_PAGE_SIZE;
    uint32_t flash_addr   = Flashdata_addr+USING_APPLICATIION_ADDR + flash_offset;

    EraseInitStruct.TypeErase   = FLASH_TYPEERASE_PAGES;    // 刷除方式      
    EraseInitStruct.PageAddress = flash_addr;    // 起始地址     
    EraseInitStruct.NbPages = 1;  //要删除的页数；128

    pagelen = BufferLen[0]*256 + BufferLen[1];
    pagelen -=9; //减去数据以外长度；
    if(pagelen>FLASH_PAGE_SIZE)return (1);
    memcpy(uiUpdata, UpdateBuffer, pagelen);
    IAPlen_total +=pagelen;

    HAL_FLASH_Unlock();

    /* 擦除1页 */
    __disable_irq();
    HAL_FLASHEx_Erase(&EraseInitStruct, &PAGEError);
    if (PAGEError != 0xFFFFFFFF)
        {
            HAL_FLASHEx_Erase(&EraseInitStruct, &PAGEError);
    }

    /* 写1页，2次半页写完成 */
    for(uint8_t i=0;i<2;i++)
        {
            if(HAL_FLASHEx_HalfPageProgram(flash_addr+(i*Flash_HalfPage),&uiUpdata[i*16])!=HAL_OK)
                {
                    HAL_FLASHEx_HalfPageProgram(flash_addr+(i*Flash_HalfPage) ,&uiUpdata[i*16]);
            }
    }

    /* 校验 */
    //TBD.
        __enable_irq();
    HAL_FLASH_Lock();
    
    return ucStatus;
}

uint8_t Flash_update_End(uint8_t *BufferLen,uint16_t NewAppLength)
{
    uint32_t uiUpDatelen;
    uint16_t uiCRC16out;
    uint16_t uiCRC16in;

    uiUpDatelen=((BufferLen[12]<<16) +(BufferLen[13]<<8) + BufferLen[14]);
    uiCRC16in = ((BufferLen[15]<<8) + BufferLen[16]);

    if((uiUpDatelen==0) || (uiUpDatelen!=NewAppLength))
        return(1);
    
    uiCRC16out= do_crc((unsigned char *)(Flashdata_addr+USING_APPLICATIION_ADDR), NewAppLength);
    if(uiCRC16out!=uiCRC16in)
        return(2);
    
    return (0);
}

//读取指定地址的半字(16位数据)
uint16_t FLASH_ReadHalfWord(uint32_t address)
{ 
return *(__IO uint16_t*)address; 
}

//读取指定地址的全字(32位数据)
uint32_t FLASH_ReadWord(uint32_t address)
{ 
return *(__IO uint32_t*)address;
}