flash 命令时序 16位数据

 int Erase_Entire_Chip
{
        WORD far *Temp;

        /*  Issue the Chip Erase command to 39VF160  */

        Temp  = (WORD far *)0xC0005555; /* set up address to be C000:5555h  */
        *Temp = 0xAAAA;                 /* write data 0xAAAA to the address */
        Temp  = (WORD far *)0xC0002AAA; /* set up address to be C000:2AAAh  */
        *Temp = 0x5555;                 /* write data 0x5555 to the address */
        Temp  = (WORD far *)0xC0005555; /* set up address to be C000:5555h  */
        *Temp = 0x8080;                 /* write data 0x8080 to the address */
        Temp  = (WORD far *)0xC0005555; /* set up address to be C000:5555h  */
        *Temp = 0xAAAA;                 /* write data 0xAAAA to the address */
        Temp  = (WORD far *)0xC0002AAA; /* set up address to be C000:2AAAh  */
        *Temp = 0x5555;                 /* write data 0x5555 to the address */
        Temp  = (WORD far *)0xC0005555; /* set up address to be C000:5555h  */
        *Temp = 0x1010;                 /* write data 0x1010 to the address */
        Delay_100_Milli_Seconds();      /* Delay Tsce time                  */
}
试试看吧。
估计是因为需要16Bits操作的原因吧,ST自己的范例文件是写入16位的数据
虽然Datasheet上表格是8位的数据 
 Writeflash(0x5555,0xAAAA);
 Writeflash(0x2AAA,0x5555);
 Writeflash(0x5555,0x8080);
 Writeflash(0x5555,0xAAAA);
 Writeflash(0x2AAA,0x5555);
 Writeflash(0x5555,0x1010);