阶段数
定义是单相测量还是三相测量。
电压Inp
定义v.t.电压输入通道。
可以选择所有电压I/P。
在三相测量的情况下,第一个通道
(R相位)必须指定。
BlockInp
用作阻止输入的二进制地址。
(F FALSE,T TRUE,保护的二进制输入或输出
功能)。
旅行
信号跳闸输出。
(信号地址)。
开始
信号拾取输出。
(信号地址)
电压V设置
延迟延迟
过电压或欠电压MaxMin
单相或三相测量。阶段数
通过检测过高的电压,过电压功能
防止发电机定子和电力变压器绕组的绝缘击穿以及温度过高
由于铁损失增加而上升。的电压过高
在出现电压的情况下,持续时间尤其可能更长
调节器故障。设置时间延迟以防止误跳闸
在瞬变过程中。通常有两个电压级,均为
其被布置为使受保护单元跳闸。
Overvoltage setting (V-Setting) Please note that, although a setting of 2.0 UN is permitted, the measuring range of the c.t./v.t. input channels is only 1.3 UN (i.e. 130 V resp. 260 V max.). The first stage is intended for moderate overvoltages of long duration. The second stage provides protection against high overvoltages and is set to 70 % of the stator test voltage. Where the rated voltages of the protected unit and the v.t's differ, the primary pick-up value in p.u. does not agree with the setting of the protection and this has to be compensated using the reference value of the A/D channel.