ESP32蓝牙串口通讯

最新推荐文章于 2024-07-29 18:57:43 发布

WIRELESS_ROOM

最新推荐文章于 2024-07-29 18:57:43 发布

阅读量462

点赞数 2

分类专栏： # ESP32 文章标签：嵌入式硬件单片机物联网

本文链接：https://blog.csdn.net/hero_8255/article/details/139768307

版权

ESP32 专栏收录该内容

1 篇文章 0 订阅

订阅专栏

文章目录

一、前言
二、代码
三、运行

一、前言

ESP32支持经典蓝牙和低功耗蓝牙（BLE）,经典蓝牙可在计算机上模拟出一个串口，使得ESP32可以以串口的方式和计算机通信。

二、代码

#include "BluetoothSerial.h"

String device_name = "ESP32-BT-Slave";

// Check if Bluetooth is available
#if !defined(CONFIG_BT_ENABLED) || !defined(CONFIG_BLUEDROID_ENABLED)
#error Bluetooth is not enabled! Please run `make menuconfig` to and enable it
#endif

// Check Serial Port Profile
#if !defined(CONFIG_BT_SPP_ENABLED)
#error Serial Port Profile for Bluetooth is not available or not enabled. It is only available for the ESP32 chip.
#endif

BluetoothSerial SerialBT;

void setup() {
  Serial.begin(115200);
  SerialBT.begin(device_name);  //Bluetooth device name
  //SerialBT.deleteAllBondedDevices(); // Uncomment this to delete paired devices; Must be called after begin
  Serial.printf("The device with name \"%s\" is started.\nNow you can pair it with Bluetooth!\n", device_name.c_str());
}

void loop() {
  if (Serial.available()) {
    SerialBT.write(Serial.read());
  }
  if (SerialBT.available()) {
    Serial.write(SerialBT.read());
  }
  delay(20);
}