R1配置
The device is running!
####################################################################
<r1>
Jul 8 2024 11:57:18-08:00 r1 %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEthern
et0/0/0 has turned into UP state.
<r1>
Jul 8 2024 11:57:18-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
<r1>
Jul 8 2024 11:57:22-08:00 r1 %%01IFPDT/4/IF_STATE(l)[2]:Interface Serial4/0/0 h
as turned into UP state.
<r1>
Jul 8 2024 11:57:24-08:00 r1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol PPP
on the interface Serial4/0/0 has entered the UP state.
<r1>
Jul 8 2024 11:57:24-08:00 r1 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol PPP
IPCP on the interface Serial4/0/0 has entered the UP state.
<r1>
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<r1>sys
<r1>system-view
Enter system view, return user view with Ctrl+Z.
[r1]interface Serial 4/0/0
[r1-Serial4/0/0]ppp pap local-user R1 password cipher 123456
[r1-Serial4/0/0]system-view
^
Error: Unrecognized command found at '^' position.
[r1-Serial4/0/0]sysname R1
[R1]interface Serial 4/0/0
[R1-Serial4/0/0]ppp pap local-user R1 password cipher 123456
[R1-Serial4/0/0]q
[R1]ip route-static 0.0.0.0 0 15.0.0.2
[R1]interface Tunnel 0/0/0
[R1-Tunnel0/0/0]ip address 192.168.5.1 24
[R1-Tunnel0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R1>sys
Enter system view, return user view with Ctrl+Z.
[R1]tunnel-protocol gre p2mp
^
Error: Unrecognized command found at '^' position.
[R1]interface Tunnel 0/0/0
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 15.0.0.1
Jul 8 2024 12:51:23-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface Tunnel0/0/0 has entered the UP state.
[R1-Tunnel0/0/0]
[R1-Tunnel0/0/0]nhrp network-id 100
[R1-Tunnel0/0/0]interface Tunnel 0/0/1
[R1-Tunnel0/0/1]ip address 192.168.6.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre
[R1-Tunnel0/0/1]source 15.0.0.1
[R1-Tunnel0/0/1]destination 45.0.0.1
Jul 8 2024 12:54:56-08:00 R1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface Tunnel0/0/1 has entered the UP state.
[R1-Tunnel0/0/1]
[R1-Tunnel0/0/1]rip
[R1-rip-1]version 2
[R1-rip-1]network 192.168.1.0
[R1-rip-1]network 192.168.5.0
[R1-rip-1]network 192.168.6.0
[R1-rip-1]interface Tunnel 0/0/0
[R1-Tunnel0/0/0]nhrp entry multicast dynamic
[R1-Tunnel0/0/0]undo rip split-horizon
[R1-Tunnel0/0/0]
R2配置
<r2>sys
<r2>system-view
Enter system view, return user view with Ctrl+Z.
[r2]sysname R2
[R2]interface Serial 4/0/0
[R2-Serial4/0/0]ppp chap user R2
[R2-Serial4/0/0]PPP chap password cipher 123456
[R2-Serial4/0/0]q
[R2]ip route-static 0.0.0.0 0 25.0.0.2
[R2]interface Tunnel 0/0/0
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
[R2-Tunnel0/0/0]
[R2-Tunnel0/0/0]
[R2-Tunnel0/0/0]
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]
[R2-Tunnel0/0/0]
[R2-Tunnel0/0/0]
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]q
[R2]interface Tunnel 0/0/0
[R2-Tunnel0/0/0]interface Tunnel 0/0/0
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]interface Serial 4/0/0
[R2-Serial4/0/0]ppp chap user R2
[R2-Serial4/0/0]PPP chap password cipher 123456
[R2-Serial4/0/0]ip route-static 0.0.0.0 0 25.0.0.2
Error: The route already exists.
[R2]ip route-static 0.0.0.0 0 25.0.0.2
Error: The route already exists.
[R2]ip route-static 0.0.0.0 0 25.0.0.2
Error: The route already exists.
[R2]interface Serial 4/0/0
[R2-Serial4/0/0]ppp chap user R2
[R2-Serial4/0/0]PPP chap password cipher 123456
[R2-Serial4/0/0]interface Tunnel 0/0/0
[R2-Tunnel0/0/0]ip address 192.168.5.2 24
Error: The address already exists.
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp
[R2-Tunnel0/0/0]source Serial 4/0/0
Jul 8 2024 12:51:40-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface Tunnel0/0/0 has entered the UP state.
[R2-Tunnel0/0/0]
[R2-Tunnel0/0/0]nhrp network-id 100
[R2-Tunnel0/0/0]nhrp entry 192.168.5.1 15.0.0.1 register
[R2-Tunnel0/0/0]rip
[R2-rip-1]version 2
[R2-rip-1]network 192.168.2.0
[R2-rip-1]network 192.168.5.0
R3配置
<r3>sys
Enter system view, return user view with Ctrl+Z.
[r3]sysname R3
[R3]interface Serial 4/0/0
[R3-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
Jul 8 2024 12:37:38-08:00 R3 %%01IFNET/4/CHANGE_ENCAP(l)[0]:The user performed
the configuration that will change the encapsulation protocol of the link and th
en selected Y.
[R3-Serial4/0/0]
[R3-Serial4/0/0]
Jul 8 2024 12:37:38-08:00 R3 %%01IFPDT/4/IF_STATE(l)[1]:Interface Serial4/0/0 h
as turned into DOWN state.
[R3-Serial4/0/0]
Jul 8 2024 12:37:39-08:00 R3 %%01IFPDT/4/IF_STATE(l)[2]:Interface Serial4/0/0 h
as turned into UP state.
[R3-Serial4/0/0]
Jul 8 2024 12:37:39-08:00 R3 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface Serial4/0/0 has entered the UP state.
[R3-Serial4/0/0]q
[R3]ip route-static 0.0.0.0 0 35.0.0.2
[R3]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]interface Tunnel 0/0/0
[R3-Tunnel0/0/0]ip address 192.168.5.3 24
[R3-Tunnel0/0/0]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]interface Tunnel 0/0/0
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp
[R3-Tunnel0/0/0]source Serial 4/0/0
Jul 8 2024 12:51:52-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface Tunnel0/0/0 has entered the UP state.
[R3-Tunnel0/0/0]
[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]nhrp entry 192.168.5.1 15.0.0.1 register
[R3-Tunnel0/0/0]rip
[R3-rip-1]ersion 2
^
Error: Unrecognized command found at '^' position.
[R3-rip-1]version 2
[R3-rip-1]network 192.168.4.0
[R3-rip-1]network 192.168.6.0
[R3-rip-1]
R4配置
The device is running!
<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]ip route-static 0.0.0.0 0 45.0.0.2
[R4]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<R4>
<R4>sys
Enter system view, return user view with Ctrl+Z.
[R4]interface Tunnel 0/0/1
[R4-Tunnel0/0/1]ip address 192.168.6.2 24
[R4-Tunnel0/0/1]tunnel-protocol gre
[R4-Tunnel0/0/1]source 45.0.0.1
[R4-Tunnel0/0/1]destination 15.0.0.1
Jul 8 2024 12:53:41-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface Tunnel0/0/1 has entered the UP state.
[R4-Tunnel0/0/1]
[R4-Tunnel0/0/1]rip
[R4-rip-1]version 2
[R4-rip-1]network 192.168.3.0
[R4-rip-1]network 192.168.5.0
[R4-rip-1]
R5配置
<ISP>sys
<ISP>system-view
Enter system view, return user view with Ctrl+Z.
[ISP]aaa
[ISP-aaa]local-user R1 password cipher 123456
Info: Add a new user.
[ISP-aaa]local-user R1 service-type ppp
[ISP-aaa]interface serial 3/0/0
[ISP-Serial3/0/0]link-protocol ppp
[ISP-Serial3/0/0]ppp authentication-mode pap
[ISP-Serial3/0/0]cd/
^
Error: Unrecognized command found at '^' position.
[ISP-Serial3/0/0]cd
^
Error: Unrecognized command found at '^' position.
[ISP-Serial3/0/0]aaa
[ISP-aaa]local-user R2 password cipher 123456
Info: Add a new user.
[ISP-aaa]local-user R2 service-type ppp
[ISP-aaa]interface Serial 3/0/1
[ISP-Serial3/0/1]ppp authentication-mode chap
[ISP-Serial3/0/1]q
[ISP]interface Serial 4/0/0
[ISP-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y
Jul 8 2024 12:36:36-08:00 ISP %%01IFNET/4/CHANGE_ENCAP(l)[0]:The user performed
the configuration that will change the encapsulation protocol of the link and t
hen selected Y.
[ISP-Serial4/0/0]
Jul 8 2024 12:36:36-08:00 ISP %%01PPP/4/PHYSICALDOWN(l)[1]:On the interface Ser
ial4/0/0, PPP link was closed because the status of the physical layer was Down.
[ISP-Serial4/0/0]
Jul 8 2024 12:36:36-08:00 ISP %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PP
P on the interface Serial4/0/0 has entered the DOWN state.
[ISP-Serial4/0/0]
Jul 8 2024 12:36:36-08:00 ISP %%01IFNET/4/LINK_STATE(l)[3]:The line protocol PP
P IPCP on the interface Serial4/0/0 has entered the DOWN state.
[ISP-Serial4/0/0]
Jul 8 2024 12:36:36-08:00 ISP %%01IFPDT/4/IF_STATE(l)[4]:Interface Serial4/0/0
has turned into DOWN state.
[ISP-Serial4/0/0]
Jul 8 2024 12:36:37-08:00 ISP %%01IFPDT/4/IF_STATE(l)[5]:Interface Serial4/0/0
has turned into UP state.
[ISP-Serial4/0/0]
Jul 8 2024 12:36:37-08:00 ISP %%01IFNET/4/LINK_STATE(l)[6]:The line protocol IP
on the interface Serial4/0/0 has entered the UP state.
[ISP-Serial4/0/0]q
[ISP]
Jul 8 2024 12:37:37-08:00 ISP %%01IFNET/4/LINK_STATE(l)[7]:The line protocol IP
on the interface Serial4/0/0 has entered the DOWN state.
[ISP]
Jul 8 2024 12:37:48-08:00 ISP %%01IFNET/4/LINK_STATE(l)[8]:The line protocol IP
on the interface Serial4/0/0 has entered the UP state.
[ISP]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
<ISP>sys
Enter system view, return user view with Ctrl+Z.
[ISP]aaa
[ISP-aaa]local-user R2 password cipher 123456
[ISP-aaa]local-user R2 service-type ppp
[ISP-aaa]interface Serial 3/0/1
[ISP-Serial3/0/1]ppp authentication-mode chap
[ISP-Serial3/0/1]
Please check whether system data has been changed, and save data in time
Configuration console time out, please press any key to log on
实验包: