ACL 实验

 

命令配置

PC1

[PC1]int g0/0/0

[PC1-GigabitEthernet0/0/0]ip add 192.168.1.10 24

[PC1-GigabitEthernet0/0/0]quit

[PC1]ip route-static 0.0.0.0 0 192.168.1.254

PC2

[PC2]int g0/0/0

[PC2-GigabitEthernet0/0/0]ip add 192.168.1.11 24

[PC2-GigabitEthernet0/0/0]quit

[PC2]ip route-static 0.0.0.0 0 192.168.1.254

[PC2]quit

 R1

[R1]int g0/0/0

[R1-GigabitEthernet0/0/0]ip add 192.168.1.254 24

[R1-GigabitEthernet0/0/0]int g0/0/1

[R1-GigabitEthernet0/0/1]ip add 192.168.2.1 24

[R1-GigabitEthernet0/0/1]quit

[R1]aaa

[R1-aaa]local-user hhj privilege level 15 password cipher hhj123

[R1-aaa]local-user hhj service-type telnet

[R1-aaa]user-interface vty 0 4

[R1-ui-vty0-4]aut

[R1-ui-vty0-4]authentication-mode aaa

[R1-ui-vty0-4]quit

[R1]acl 3000

[R1-acl-adv-3000]rule deny icmp source 192.168.1.10 0.0.0.0 destination 192.168.2.1 0.0.0.0

[R1-acl-adv-3000]rule deny icmp source 192.168.1.10 0.0.0.0 destination 192.168.1.254 0.0.0.0

[R1-acl-adv-3000]rule deny tcp source 192.168.1.10 0.0.0.0 destination 192.168.2.2 0.0.0.0 destination-port eq 23

[R1-acl-adv-3000]rule deny tcp source 192.168.1.11 0.0.0.0 destination 192.168.1.254 0.0.0.0 destination-port eq 23

[R1-acl-adv-3000]rule deny tcp source 192.168.1.11 0.0.0.0 destination 192.168.2.1 0.0.0.0 destination-port eq 23

[R1-acl-adv-3000]rule deny icmp source 192.168.1.11 0.0.0.0 destination 192.168.2.2 0.0.0.0

[R1-acl-adv-3000]quit

[R1]int g0/0/0

[R1-GigabitEthernet0/0/0]traffic-filter inbound acl 3000

[R1-GigabitEthernet0/0/0]quit

 R2

[R2]int g0/0/0

[R2-GigabitEthernet0/0/0]ip add 192.168.2.2 24

[R2-GigabitEthernet0/0/0]quit

[R2]aaa

[R2-aaa]local-user wxn pre

[R2-aaa]local-user wxn p

[R2-aaa]local-user wxn pr

[R2-aaa]local-user wxn privilege level 15 password cipher wxn123

[R2-aaa]local-user wxn service-type telnet

[R2-aaa]user-interface vty 0 4

[R2-ui-vty0-4]authentication-mode aaa

[R2-ui-vty0-4]quit

[R2]