[Latex] Riemann 问题中的激波,接触间断,膨胀波的 Tikz 绘图

1. 三种膨胀波

Latex 代码

\begin{figure}
    \centering
    \begin{subfigure}[b]{0.32\textwidth}
        \centering
        \resizebox{\linewidth}{!}{
            \begin{tikzpicture}
                \coordinate (o) at (0,0);
                \coordinate (S1) at (2.5,2.5);
                \draw[->] (0,0) -- (3,0) node[right] {$x$};
                \draw[->] (0,0) -- (0,3) node[above] {$t$};
                \draw[-] (o) -- (S1) node[right] {$S_1$};
                \draw[->] (0.5,2) -- (2,2.3) node[midway, above] {$\boldsymbol{U}_L$};
                \draw[->] (2,0.5) -- (2.3,2) node[midway, right] {$\boldsymbol{U}_R$};
                \node[below left] {$o$};
            \end{tikzpicture}
        }
        \caption{shock wave}
        \label{fig:shock_wave_1}
    \end{subfigure}
    \begin{subfigure}[b]{0.32\textwidth}
        \centering
        \resizebox{\linewidth}{!}{
            \begin{tikzpicture}
                \coordinate (o) at (0,0);
                \coordinate (S2) at (2.5,2.5);
                \draw[->] (0,0) -- (3,0) node[right] {$x$};
                \draw[->] (0,0) -- (0,3) node[above] {$t$};
                \draw[dashed] (o) -- (S2) node[right] {$S_2$};
                \draw[->] (0.7,1.5) -- (1.7,2.5) node[midway, left] {$\boldsymbol{U}_L$};
                \draw[->] (1.5,0.7) -- (2.5,1.7) node[midway, right] {$\boldsymbol{U}_R$};
                \node[below left] {$o$};
            \end{tikzpicture}
        }
        \caption{contact discontinuity}
        \label{fig:contact_discontinuity_1}
    \end{subfigure}
    \begin{subfigure}[b]{0.32\textwidth}
        \centering
        \resizebox{\linewidth}{!}{
            \begin{tikzpicture}
                \coordinate (o) at (0,0);
                \coordinate (S1) at (1.8,2.7);
                \coordinate (S2) at (2.2,2.7);
                \coordinate (S3) at (2.5,2.5);
                \coordinate (S4) at (2.7,2.2);
                \coordinate (S5) at (2.7,1.8);
                \draw[->] (0,0) -- (3,0) node[right] {$x$};
                \draw[->] (0,0) -- (0,3) node[above] {$t$};
                \draw[-] (o) -- (S1) node[right] {};
                \draw[-] (o) -- (S2) node[right] {};
                \draw[-] (o) -- (S3) node[right] {};
                \draw[-] (o) -- (S4) node[right] {};
                \draw[-] (o) -- (S5) node[right] {};
                \draw[->] (0.5,1.5) -- (1.4,2.85) node[midway, left] {$\boldsymbol{U}_L$};
                \draw[->] (1.5,0.5) -- (2.85,1.4) node[midway, right] {$\boldsymbol{U}_R$};
                \node[below left] {$o$};
            \end{tikzpicture}
        }
        \caption{rarefaction wave}
        \label{fig:rarefaction_wave_1}
    \end{subfigure}
    \caption{Wave of Riemann problem. $S_1, S_2$ is wave speed, $U_L,U_R$ are initial data states connected by a single wave.}
    \label{fig:wave_of_riemann}
\end{figure}

输出:

在这里插入图片描述

绘图参考:

《Riemann Solvers and Numerical Methods for Fluid Dynamics》P84

2. Riemann 问题的解

Latex 代码:

\begin{figure}
    \centering
    \begin{subfigure}[b]{0.4\textwidth}
        \centering
        \resizebox{\linewidth}{!}{
            \begin{tikzpicture}
                \coordinate (o) at (0,0);
                \coordinate (S1) at (2.5,2.5);
                \coordinate (S2) at (1.2,3);
                \coordinate (S3) at (-2.5,2.5);
                \draw[->] (-3,0) -- (3,0) node[right] {$x$};
                \draw[->] (0,0) -- (0,3) node[above] {$t$};
                \draw[-] (o) -- (S1) node[right] {};
                \draw[dashed] (o) -- (S2) node[right] {};
                \draw[-] (o) -- (S3) node[right] {};
                \node[below left] (o) {$o$};
            \end{tikzpicture}
        }
        \caption{shock, contact, shock}
        \label{fig:riemann_sol_1}
    \end{subfigure}
    \begin{subfigure}[b]{0.4\textwidth}
        \centering
        \resizebox{\linewidth}{!}{
            \begin{tikzpicture}
                \coordinate (o) at (0,0);
                \coordinate (S1) at (2.2,2.7);
                \coordinate (S2) at (2.5,2.5);
                \coordinate (S3) at (2.7,2.2);
                \coordinate (S4) at (1.2,3);
                \coordinate (S5) at (-2.2,2.7);
                \coordinate (S6) at (-2.5,2.5);
                \coordinate (S7) at (-2.7,2.2);
                \draw[->] (-3,0) -- (3,0) node[right] {$x$};
                \draw[->] (0,0) -- (0,3) node[above] {$t$};
                \draw[-] (o) -- (S1) node[right] {};
                \draw[-] (o) -- (S2) node[right] {};
                \draw[-] (o) -- (S3) node[right] {};
                \draw[dashed] (o) -- (S4) node[right] {};
                \draw[-] (o) -- (S5) node[right] {};
                \draw[-] (o) -- (S6) node[right] {};
                \draw[-] (o) -- (S7) node[right] {};
                \node[below left] (o) {$o$};
            \end{tikzpicture}
        }
        \caption{rarefaction, contact, rarefaction}
        \label{fig:riemann_sol_2}
    \end{subfigure}\\
    \begin{subfigure}[b]{0.4\textwidth}
        \centering
        \resizebox{\linewidth}{!}{
            \begin{tikzpicture}
                \coordinate (o) at (0,0);
                \coordinate (S1) at (2.5,2.5);
                \coordinate (S2) at (1.2,3);
                \coordinate (S3) at (-2.2,2.7);
                \coordinate (S4) at (-2.5,2.5);
                \coordinate (S5) at (-2.7,2.2);
                \draw[->] (-3,0) -- (3,0) node[right] {$x$};
                \draw[->] (0,0) -- (0,3) node[above] {$t$};
                \draw[-] (o) -- (S1) node[right] {};
                \draw[dashed] (o) -- (S2) node[right] {};
                \draw[-] (o) -- (S3) node[right] {};
                \draw[-] (o) -- (S4) node[right] {};
                \draw[-] (o) -- (S5) node[right] {};
                \node[below left] (o) {$o$};
            \end{tikzpicture}
        }
        \caption{rarefaction, contact, shock}
        \label{fig:riemann_sol_3}
    \end{subfigure}
    \begin{subfigure}[b]{0.4\textwidth}
        \centering
        \resizebox{\linewidth}{!}{
            \begin{tikzpicture}
                \coordinate (o) at (0,0);
                \coordinate (S1) at (2.2,2.7);
                \coordinate (S2) at (2.5,2.5);
                \coordinate (S3) at (2.7,2.2);
                \coordinate (S4) at (1.2,3);
                \coordinate (S5) at (-2.5,2.5);
                \draw[->] (-3,0) -- (3,0) node[right] {$x$};
                \draw[->] (0,0) -- (0,3) node[above] {$t$};
                \draw[-] (o) -- (S1) node[right] {};
                \draw[-] (o) -- (S2) node[right] {};
                \draw[-] (o) -- (S3) node[right] {};
                \draw[dashed] (o) -- (S4) node[right] {};
                \draw[-] (o) -- (S5) node[right] {};
                \node[below left] (o) {$o$};
            \end{tikzpicture}
        }
        \caption{shock, contact, rarefaction}
        \label{fig:riemann_sol_4}
    \end{subfigure}
    \caption{Four situations of Riemann problem.}
    \label{fig:riemann_four_solutions}
\end{figure}

输出:

在这里插入图片描述

绘图参考:

《Riemann Solvers and Numerical Methods for Fluid Dynamics》P118

以下是对提供的参考资料的总结,按照要求结构化多个要点分条输出: 4G/5G无线网络优化与网规案例分析: NSA站点下终端掉4G问题:部分用户反馈NSA终端频繁掉4G,主要因终端主动发起SCGfail导致。分析显示,在信号较好的环境下,终端可能因节能、过热保护等原因主动释放连接。解决方案建议终端侧进行分析处理,尝试关闭节电开关等。 RSSI算法识别天馈遮挡:通过计算RSSI平均值及差值识别天馈遮挡,差值大于3dB则认定有遮挡。不同设备分组规则不同,如64T和32T。此方法可有效帮助现场人员识别因环境变化引起的网络问题。 5G 160M组网小区CA不生效:某5G站点开启100M+60M CA功能后,测试发现UE无法正常使用CA功能。问题原因在于CA频点集标识配置错误,修正后测试正常。 5G网络优化与策略: CCE映射方式优化:针对诺基亚站点覆盖农村区域,通过优化CCE资源映射方式(交织、非交织),提升RRC连接建立成功率和无线接通率。非交织方式相比交织方式有显著提升。 5G AAU两扇区组网:与三扇区组网相比,AAU两扇区组网在RSRP、SINR、下载速率和上传速率上表现不同,需根据具体场景选择适合的组网方式。 5G语音解决方案:包括沿用4G语音解决方案、EPS Fallback方案和VoNR方案。不同方案适用于不同的5G组网策略,如NSA和SA,并影响语音连续性和网络覆盖。 4G网络优化与资源利用: 4G室分设备利旧:面对4G网络投资压减与资源需求矛盾,提出利旧多维度调优策略,包括资源整合、统筹调配既有资源,以满足新增需求和提质增效。 宏站RRU设备1托N射灯:针对5G深度覆盖需求,研究使用宏站AAU结合1托N射灯方案,快速便捷地开通5G站点,提升深度覆盖能力。 基站与流程管理: 爱立信LTE基站邻区添加流程:未提供具体内容,但通常涉及邻区规划、参数配置、测试验证等步骤,以确保基站间顺畅切换和覆盖连续性。 网络规划与策略: 新高铁跨海大桥覆盖方案试点:虽未提供详细内容,但可推测涉及高铁跨海大桥区域的4G/5G网络覆盖规划,需考虑信号穿透、移动性管理、网络容量等因素。 总结: 提供的参考资料涵盖了4G/5G无线网络优化、网规案例分析、网络优化策略、资源利用、基站管理等多个方面。 通过具体案例分析,展示了无线网络优化的常见问题及解决方案,如NSA终端掉4G、RSSI识别天馈遮挡、CA不生效等。 强调了5G网络优化与策略的重要性,包括CCE映射方式优化、5G语音解决方案、AAU扇区组网选择等。 提出了4G网络优化与资源利用的策略,如室分设备利旧、宏站RRU设备1托N射灯等。 基站与流程管理方面,提到了爱立信LTE基站邻区添加流程,但未给出具体细节。 新高铁跨海大桥覆盖方案试点展示了特殊场景下的网络规划需求。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值