华为AC双机热备配置

hublive

已于 2023-11-07 21:03:10 修改

阅读量1.4k

点赞数 3

文章标签：网络运维华为

于 2023-11-06 13:02:26 首次发布

本文链接：https://blog.csdn.net/hublive/article/details/134243894

版权

本文详细描述了AC1设备的VLAN配置，包括VLANIF接口、VRRP隧道、HSB互通以及WLAN（SSID、安全配置和AP组）的设置过程，强调了配置顺序和HSB服务的启用步骤。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

AC1 接口及vlan配置

interface Vlanif203  # vrrp capwap隧道
 ip address 192.168.203.1 255.255.255.0
 vrrp vrid 203 virtual-ip 192.168.203.254
 admin-vrrp vrid 203 
 vrrp vrid 203 priority 120
 vrrp vrid 203 preempt-mode timer delay 20
#
interface Vlanif204  # HSB互通vlan
 ip address 192.168.204.1 255.255.255.0

#放通 聚合口互通vlan和业务vlan
interface Eth-Trunk1
 port link-type trunk
 port trunk allow-pass vlan 51 to 55 101 to 105 203 to 204
 mode lacp-static

AC1 WLAN配置及HSB配置

vlan p employee   #创建地址池
vlan 51 t 55
vlan p guest
vlan 101 t 105    #创建地址池

wlan
ssid-profile name Guest  #创建SSID
ssid Titan-Guest
q

ssid-profile name Employee
ssid Titan-Employee
q

security-profile n titan
security wpa-wpa2 psk pass-phrase Huawei@123 aes

vap-profile name guest  
service-vlan vlan-pool guest
ssid-profile Guest
security-profile titan
q
vap-profile name employee
service-vlan vlan-pool employee
ssid-profile Employee
security-profile titan
q

ap-group n titan
vap-p employee wlan 1 r a
vap-p guest wlan 2 r a

ap-id 1 ap-mac 00e0-fc7c-1f40
ap-name  Titan_AP_1
ap-group titan
y

ap-id 2 ap-mac 00e0-fcc6-7900
ap-name  Titan_AP_2
ap-group titan
y

ap-id 3 ap-mac 00e0-fcb1-7d20
ap-name  Titan_AP_3
ap-group titan
y


vrrp recover-delay 60  
 
int vlan 203
admin-vrrp vrid 203
   
   
hsb-service 0 
 service-ip-port local-ip 192.168.204.2 peer-ip 192.168.204.1 local-data-port 10241 peer-data-port 10241
 service-keep-alive detect retransmit 3 interval 6
 
hsb-group 0
 track vrrp vrid 203 interface Vlanif203
 bind-service 0
 
hsb-service-type ap hsb-group 0
hsb-service-type dhcp hsb-group 0
hsb-service-type access-user hsb-group 0

# 配置完成后才和可以开启hsb enable
hsb-group 0
 hsb enable

AC2 配置和AC一样区别在于，wlan和hsb配置完成后才可以开启hsb enable