wget http://download3.vmware.com/software/vmserver/VMware-server-1.0.8-126538.i386.rpm
rpm -ivh VMware-server-1.0.8-126538.i386.rpm
/usr/bin/vmware
提示:
vmware is installed, but it has not been (correctly) configured
for this system. To (re-)configure it, invoke the following command:
/usr/bin/vmware-config.pl.
安装说明执行
/usr/bin/vmware-config.pl
又提示:
If you do have "inetd" or "xinetd" installed, make sure that /etc/inetd.conf or
/etc/xinetd.d exists.
The configuration will continue, but you should re-run
/usr/bin/vmware-config.pl after you fix the super-server.
yum install xinetd
之后再
/usr/bin/vmware-config.pl
正常了,
VMware 安装成功
启动之后提示要serial number
只要到网站上注册下就可以得到一个了,点 Get Serial Number
按提示操作,ok
在VMware-server for linux 下装centos,在建立分区的时候
提示:
an error has occurred. - no valid devices were found on which to create new file systems please check your hardware for the cause of this problem
在建立虚拟机的时候选择custom
然后在选择硬盘的时候选择ide(默认是scsi)
原因是scsi需要驱动才能正常读取硬盘