MX9292 DatasheetHDMI to VGA Convertor with Audio Support

1 Introduction

The Capstone

MX9292HDMI to VGA converter combines a HDMI input interface and an analog RGB DAC

output. With support and on-chip Audio DAC, it saves cost and optimizes board space. The embedded MCU is

based on an industrial standard 8051 core.

The MX9292is suitable for multiple market segments and display applications, such as laptop, motherboard,

desktop, dongle, and docking system.

2 Features

VGA output interface, DAC speed up to ~200-MHz Pixel rate, 8-bit

General

HDMI 1.4 compliant receiver

Video resolution support up to 1920x1200@60 and 1920X1080@60Hz

Embedded oscillator and there’s no need for external crystal

Embedded linear dropout regulator (LDO)

Embedded MCU

On-chip HDCP Engine Which is compliant with HDCP 1.4 Specification (Optional)

Integrated on-chip HDCP 1.4 Keys (Optional)

Embedded EDID (MX9292will response EDID if terminal device doesn’t have it)

Support EEPROM Free mode by using the internal pre-blew ROM

Support Auto Power Saving mode

VGA Connection detection supported

Internal power-on-reset (POR)

Dual Channel 16-bit resolution sigma-delta DAC

Support Audio Sampling Frequently (Fs): up to 48KHz

 I2C Slave interface and HDMI DDC interface are available for debug and firmware update.

 QFN32 4x4 package

HDMI Digital Input

HDMI 1.4 compliant

Built-in high-performance adaptive equalizer

VGA Output Interface

Triple 8-bit DAC (Digital-to-Analog Converter) with clock up to 200-MHz

 Support Hot Plug Detection

Video resolution support up to 1920x1200@60 and 1920X1080@60Hz

Embedded V-sync/ H-sync 5V buffer

HBM 4-KV for VGA connector pins

VESA VSIS v1r2 compliant

Embedded MCU

 Industrial standard 8051 core

 Support I2C Master and Slave up to 400-KHz.

Power & Technology

 Single 5V power supply

 Ultralow standby power < 100uW