synergy网络多设备间网络共享键鼠
主要操作流程如下:
Synergy 错误: ERROR: failed to connect secure socket
https://blog.csdn.net/qq_22558867/article/details/114317297
a. 找到Synergy的配置文件, 其配置文件名为Synergy.conf,通过find命令找到其具体路径为
/home/{用户名}/.config/Synergy/Synergy.conf
b. 修改配置文件 把cryptoEnabled字段改为false保存
[General]
cryptoEnabled=false
c. 重启Synergy
Ubuntu作为Server
https://www.cnblogs.com/CZM-/p/5893970.html
http://t.zoukankan.com/KarryWang-p-3385813.html
如果用ubuntu作server,要用命令 synergys -f --config synergy.conf, 记得synergy后面加一个s
这里我还是失败了—_—|,client连接不上server,不过还是记录下——> 失败是我自己电脑的问题,神奇的电脑只能做客户端不能做服务端,在所有应用中都是
进阶-局域网连接
Synergy
用网线连接两台电脑,组建小型局域网。
设置网络ip处于同一网段,子网掩码相同,网关可不设置
一般ping得通就没问题。
还不行就是Synergy ssl加密没关或者版本对应不上。
搜狗输入法与synergy依赖包冲突,只能选其一
换谷歌输入法
sudo apt-get install fcitx-googlepinyin
The following packages have unmet dependencies:
synergy : Depends: libqt4-network (>= 4:4.5.3) but it is not going to be installed
Depends: libqtcore4 (>= 4:4.8.0) but it is not going to be installed
Depends: libqtgui4 (>= 4:4.8.0) but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
sudo aptitude install libqtcore4
sudo aptitude install libqtgui4
一直按y,即可成功安装
依赖包冲突
由于Synergy与Ubuntu 20中很多包的依赖存在冲突,更新其他依赖包时Synergy会自动被卸载。
选择改用barrier作为替代品,一开始打算Synergy同barrier通信连接,但成功连接后自动断开,便将两台主机都更换为barrier
Ubuntu20:软件商店可以搜索到barrier
Ubuntu16:
https://launchpad.net/~jonathonf/+archive/ubuntu/barrier/+packages
https://github.com/debauchee/barrier/issues/170
设置开机启动
sudo cp {SoftwarePath}/software.desktop /etc/xdg/autostart/