Can't configure device. Expected JTAG ID code问题总结

Can't configure device. Expected JTAG ID code问题总结

1：JTAG 下载不稳定

（1）用 ByteBlasterMV [LPT1]下载线下载*.sof文件时，下载到87%就会出现下面的问题：

       Error: Can't configure device. Expected JTAG ID code 0x020940DD for device 1, but    found JTAG ID code 0xFFFFFFFF.

但是用Auto detect还能检测到JTAG，继续下载又会重复上面的错误，

（2）有时也能下载成功，但是当用SignalTap II进行采样时，又会出现下面的错误：

Error: Can't find the instance.   Download a design with SRAM Object File containing this instance.

有时也能下载并采样成功，有时就会出现上面两种错误。

（3）当检测不到JTAG时，把电源关了再开，就又能检测到JTAG了

问题原因：电源不稳定；可能是虚焊。（目前已经碰到的）

2:ALTERA公司的问题

Problem

JTAG Programming Failure "Can't configure device.Expected JTAG ID code 0xZZZZZZZZ for device 4,but found JTAG ID code 0xYYYYYYYY"

Solution

This programming failure may be caused if you have a non-ALTERA device in your JTAG chain. Ensure you bypass all non-Altera devices in Quartus II to avoid this message.

3：Quartus II里的目标器件与实际开发板上器件不一致

Error: Can't configure device. Expected JTAG ID code 0x020820DD for device 1, but found JTAG ID code 0x020830DD.

查看了半天发现原来是device 选择出错了，也就是实际的硬件设备和assignments/device里面所选的器件不一致，这个可以重新选择一下然后全部重新编译一下就好．