Device chain in Chain Description File does not match physical device chain expected 2 device(s) bu

最新推荐文章于 2024-07-28 07:00:00 发布

kingkong529

最新推荐文章于 2024-07-28 07:00:00 发布

阅读量5.3k

点赞数

文章标签： file menu include button

本文链接：https://blog.csdn.net/kingkong529/article/details/5151600

版权

在尝试配置设备时遇到'Device chain in Chain Description File does not match physical device chain'的错误。解决方案包括：确保CDF文件中的设备顺序与物理链匹配，使用Quartus II Programmer的Auto Detect功能检查设备顺序，并根据需要在CDF中添加或忽略设备。如果不需要为某个设备编写程序，只需在'Program configure'选项中取消选中该设备，而不是从CDF中删除。

摘要由CSDN通过智能技术生成

Error:Device chain in Chain Description File does not match physical device chain -- expected 2 device(s) but found 1 device(s)

最近遇到了这个问题，在网上有遇到同样问题的，但都没有把答案写出来，很是郁闷，捣腾了很久无果上了altera官网发现如下:

( http://www.altera.com/cgi-bin/ts.pl?fn=jtagprog&hi=6-150) Can't configure device. Expected JTAG ID code for device , but found JTAG ID code Verify the following: 1. If you only have a single device in the JTAG chain, the device in the chain must correspond to the programming file's targeted device. 2. If you have more than one device in the chain, the programming files should target the correct devices. The order of the devices in the Chain Description File (CDF) must match the order of the devices in the physical chain. The first device in the programmer is the first device in the chain. You can click on the Auto Detect button in the Quartus® II Programmer to check the order of the devices in the physical JTAG chain. E