Device chain in Chain Description File does not match physical device chain expected 2 device(s) but found 1 device(s)

Error:Device chain in Chain Description File does not match physical device chain -- expected 2 device(s) but found 1 device(s)

最近遇到了这个问题，在网上有遇到同样问题的，但都没有把答案写出来，很是郁闷，捣腾了很久无果上了altera官网发现如下:

 ( http://www.altera.com/cgi-bin/ts.pl?fn=jtagprog&hi=6-150) Can't configure device. Expected JTAG ID code for device , but found JTAG ID code Verify the following: 1. If you only have a single device in the JTAG chain, the device in the chain must correspond to the programming file's targeted device. 2. If you have more than one device in the chain, the programming files should target the correct devices. The order of the devices in the Chain Description File (CDF) must match the order of the devices in the physical chain. The first device in the programmer is the first device in the chain. You can click on the Auto Detect button in the Quartus® II Programmer to check the order of the devices in the physical JTAG chain. Even if you want to bypass a device in the physical JTAG chain, you must include the device in the CDF. To bypass an Altera® device: a. Choose Add Device (Edit menu, or from the programmer window toolbar). b. Select the device from the correct family and check the box. c. Click OK. The device will be added to the CDF. To bypass an non-Altera device: d. Choose Add Device (Edit menu, or from the programmer window toolbar). e. Choose New and enter the necessary information for the device. f. Click OK. The device will be added to the CDF. Make the necessary changes and try to program/configure your device(s) again. 看了上面的后我都不自已添加器件了，全用”AUTO Detect” 检测到器件后不从 “Add File”中添加源程序，单击后面检查到的器件中“File”栏下所对应的“none”便可以了。注意在这之间不要删除自动检查到的设备，如果有的器件你不需要写程序，在“Program configure”栏下中对应的器件不选中即可。如果因不想对某个器件写程序而删除它的话就会出现错误。