EXTI的配置

	GPIO_InitType GPIO_InitStructure;
	NVIC_InitType NVIC_InitStructure;
	
	RCC_EnableAPB2PeriphClk( RCC_APB2_PERIPH_GPIOA | RCC_APB2_PERIPH_GPIOB |RCC_APB2_PERIPH_GPIOC | RCC_APB2_PERIPH_GPIOD | RCC_APB2_PERIPH_GPIOE | RCC_APB2_PERIPH_AFIO, ENABLE);

	//INT0、INT1
	GPIO_InitStructure.Pin = INT0_PIN | INT1_PIN;
	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
	GPIO_InitPeripheral(INT0_GPIO, &GPIO_InitStructure); 	

	GPIO_ConfigEXTILine(GPIOD_PORT_SOURCE,  GPIO_PIN_SOURCE13 | GPIO_PIN_SOURCE12 | GPIO_PIN_SOURCE11);//AFIO寄存器的 AFIO_EXTICRx 值，设为PD13/PD12/PD11
	
	EXTI_InitType EXTI_InitStructure;	
	EXTI_InitStructure.EXTI_Line     =   EXTI_LINE13 | EXTI_LINE12;
	EXTI_InitStructure.EXTI_Mode     =   EXTI_Mode_Interrupt;
	EXTI_InitStructure.EXTI_Trigger  =   EXTI_Trigger_Rising;
	EXTI_InitStructure.EXTI_LineCmd  =   ENABLE;	
	EXTI_InitPeripheral( &EXTI_InitStructure);
  
	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);
	
	NVIC_InitStructure.NVIC_IRQChannel                     =   EXTI15_10_IRQn;
	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority   =   1;
	NVIC_InitStructure.NVIC_IRQChannelSubPriority          =   1;
	NVIC_InitStructure.NVIC_IRQChannelCmd                  =   ENABLE;
	NVIC_Init(&NVIC_InitStructure);