yocto spidev修改设备树增加片选信号

1.直接修改已经fetch到tmp目录的dtsi文件

$ vi ./tmp/work-shared/xarina-s-evb/kernel-source/arch/arm/boot/dts/xarina_standard_spi_pl022.dtsi

  

                              pl022,com-mode = <2>;
                                pl022,rx-level-trig = <1>;
                                pl022,tx-level-trig = <1>;
                                pl022,duplex = <0>;
                        };
                };
                spi_b: spi@ff28c000 {
                        compatible = "arm,pl022", "arm,primecell";
                        arm,primecell-periphid = <0x41022>;
                        reg = <0xff28c000 0x1000>;
                        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clk_spi_b 0>, <&apb_pclk 0>;
                        clo