环境:VMWare 6.5.1 硬盘是SCSI,LSI Logic
主要注意事项:
1 硬盘文件系统要编译进去
2
-> Device Drivers
-> SCSI device support
- > SCSI disk support 这个要编译进去
3 -> Device Drivers
-> SCSI device support
-> SCSI low-level drivers
-> LSI Logic SCSI support 这个要编译进去
4
-> Device Drivers
-> Fusion MPT device support
-> *
【这个很重要】一般不被人注意,一样要编译进去,我胆小,把这下面所有的都编译进去了
另外,/etc/fstab 和 /boot/grub/grub.conf 要写正确了
然后就OK啦!
真实机器也是一样的选 LSI Logic ,还有 Fusion ,我刚测试过,我的机器是 945的芯片,选的 LSI Logic 和 Fusion
vmware 安装 gentoo 注意地方
最新推荐文章于 2021-05-15 18:48:10 发布