本文详细介绍了如何将RTL8189无线网卡芯片驱动移植到Hi3556V200平台的Linux系统中。主要内容包括驱动文件的放置路径、Kconfig与Makefile的修改步骤，以及不同平台的交叉编译设置。
Hi3556V200从代理拿到的SDK包中,是不包含RTL8189模块的驱动的。我们从某WIFI模块厂家要到了RTL8189的芯片驱动,于是开始着手移植驱动到平台上面。
一、Linux驱动添加RTL8189芯片驱动
1、将RTL8189驱动包解压到如下路径
osdrv/opensource/kernel/linux-4.9.y/drivers/net/wireless
2、修改同级Kconfig、Makefile文件
A、Kconfig添加 source "drivers/net/wireless/rtl8189FS/Kconfig"
#
# Wireless LAN device configuration
#
menuconfig WLAN
bool "Wireless LAN"
depends on !S390
depends on NET
select WIRELESS
default y
---help---
This section contains all the pre 802.11 and 802.11 wireless
device drivers. For a complete list of drivers and documentation
on them refer to the wireless wiki:
http://wireless.kernel.org/en/users/Drivers
if WLAN
source "drivers/net/wireless/admtek/Kconfig"
source "drivers/net/wireless/ath/Kconfig"
source "drivers/net/wireless/atmel/Kconfig"
source "drivers/net/wireless/broadcom/Kconfig"
source "drivers/net/wireless/cisco/Kconfig"
source "drivers/net/wireless/intel/Kconfig"
source "drivers/net/wireless/intersil/Kconfig"
source "drivers/net/wireless/marvell/Kconfig"
source "drivers/net/wireless/mediatek/Kconfig"
source "drivers/net/wireless/ralink/Kconfig"
source "drivers/net/wireless/realtek/Kconfig"
source "drivers/net/wireless/rsi/Kconfig"
source "drivers/net/wireless/st/Kconfig"
source "drivers/net/wireless/ti/Kconfig"
source "drivers/net/wireless/zydas/Kconfig"
source "drivers/net/wireless/rtl8189FS/Kconfig"
source "drivers/net/wireless/rtl8723DS/Kconfig"
config PCMCIA_RAYCS
tristate "Aviator/Raytheon 2.4GHz wireless support"
depends on PCMCIA
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
---help---
Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
(PC-card) wireless Ethernet networking card to your computer.
Please read the file <file:Documentation/networking/ray_cs.txt> for
details.
To compile this driver as a module, choose M here: the module will be
called ray_cs. If unsure, say N.
config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards"
depends on CFG80211 && PCMCIA
select WIRELESS_EXT
select WEXT_SPY
help
A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
It has basic support for Linux wireless extensions and initial
micro support for ethtool.
config MAC80211_HWSIM
tristate "Simulated radio testing tool for mac80211"
depends on MAC80211
---help---
This driver is a developer testing tool that can be used to test
IEEE 802.11 networking stack (mac80211) functionality. This is not
needed for normal wireless LAN usage and is only for testing. See
Documentation/networking/mac80211_hwsim for more information on how
to use this tool.
To compile this driver as a module, choose M here: the module will be
called mac80211_hwsim. If unsure, say N.
config USB_NET_RNDIS_WLAN
tristate "Wireless RNDIS USB support"
depends on USB
depends on CFG80211
select USB_NET_DRIVERS
select USB_USBNET
select USB_NET_CDCETHER
select USB_NET_RNDIS_HOST
---help---
This is a driver for wireless RNDIS devices.
These are USB based adapters found in devices such as:
Buffalo WLI-U2-KG125S
U.S. Robotics USR5421
Belkin F5D7051
Linksys WUSB54GSv2
Linksys WUSB54GSC
Asus WL169gE
Eminent EM4045
BT Voyager 1055
Linksys WUSB54GSv1
U.S. Robotics USR5420
BUFFALO WLI-USB-G54
All of these devices are based on Broadcom 4320 chip which is the
only wireless RNDIS chip known to date.
If you choose to build a module, it'll be called rndis_wlan.
endif # WLANB、Makefile 添加 obj-$(CONFIG_RTL8189FS) += rtl8189FS/
#
# Makefile for the Linux Wireless network device drivers.
#
obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/
obj-$(CONFIG_WLAN_VENDOR_ATH) += ath/
obj-$(CONFIG_WLAN_VENDOR_ATMEL) += atmel/
obj-$(CONFIG_WLAN_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/
obj-$(CONFIG_WLAN_VENDOR_INTEL) += intel/
obj-$(CONFIG_WLAN_VENDOR_INTERSIL) += intersil/
obj-$(CONFIG_WLAN_VENDOR_MARVELL) += marvell/
obj-$(CONFIG_WLAN_VENDOR_MEDIATEK) += mediatek/
obj-$(CONFIG_WLAN_VENDOR_RALINK) += ralink/
obj-$(CONFIG_WLAN_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_WLAN_VENDOR_RSI) += rsi/
obj-$(CONFIG_WLAN_VENDOR_ST) += st/
obj-$(CONFIG_WLAN_VENDOR_TI) += ti/
obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/
obj-$(CONFIG_RTL8189FS) += rtl8189FS/
obj-$(CONFIG_RTL8189FS) += rtl8723DS/
# 16-bit wireless PCMCIA client drivers
obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
obj-$(CONFIG_USB_NET_RNDIS_WLAN) += rndis_wlan.o
obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o
完成以上之后,在 osdrv/opensource/kernel/linux-4.9.y 目录下执行
make ARCH=arm CROSS_COMPILE=arm-himix100-linux- menuconfig就可以看到RTL8189的配置选项，将其勾选为模块。如下图所示
2、修改RTL8189驱动包Makefile文件
A、修改平台选项
将CONFIG_PLATFORM_HISILICON 赋值为y，其他选项为N
B、修改海思平台对应编译参数
ifeq ($(CONFIG_PLATFORM_HISILICON), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_HISILICON
ifeq ($(SUPPORT_CONCURRENT),y)
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
endif
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
ARCH := arm
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE = arm-himix100-linux-
endif
MODULE_NAME := rtl8192eu
ifeq ($(KSRC),)
KSRC := ../../../../
endif
endif具体文件内容如下
EXTRA_CFLAGS += $(USER_EXTRA_CFLAGS)
EXTRA_CFLAGS += -O1
#EXTRA_CFLAGS += -O3
#EXTRA_CFLAGS += -Wall
#EXTRA_CFLAGS += -Wextra
#EXTRA_CFLAGS += -Werror
#EXTRA_CFLAGS += -pedantic
#EXTRA_CFLAGS += -Wshadow -Wpointer-arith -Wcast-qual -Wstrict-prototypes -Wmissing-prototypes
EXTRA_CFLAGS += -Wno-unused-variable
EXTRA_CFLAGS += -Wno-unused-value
EXTRA_CFLAGS += -Wno-unused-label
EXTRA_CFLAGS += -Wno-unused-parameter
EXTRA_CFLAGS += -Wno-unused-function
EXTRA_CFLAGS += -Wno-unused
#EXTRA_CFLAGS += -Wno-uninitialized
GCC_VER_49 := $(shell echo `$(CC) -dumpversion | cut -f1-2 -d.` \>= 4.9 | bc )
ifeq ($(GCC_VER_49),1)
EXTRA_CFLAGS += -Wno-date-time # Fix compile error && warning on gcc 4.9 and later
endif
EXTRA_CFLAGS += -I$(src)/include
EXTRA_LDFLAGS += --strip-debug
CONFIG_AUTOCFG_CP = n
########################## WIFI IC ############################
CONFIG_MULTIDRV = n
CONFIG_RTL8188E = n
CONFIG_RTL8812A = n
CONFIG_RTL8821A = n
CONFIG_RTL8192E = n
CONFIG_RTL8723B = n
CONFIG_RTL8814A = n
CONFIG_RTL8723C = n
CONFIG_RTL8188F = y
CONFIG_RTL8188GTV = n
CONFIG_RTL8822B = n
CONFIG_RTL8723D = n
CONFIG_RTL8821C = n
######################### Interface ###########################
CONFIG_USB_HCI = n
CONFIG_PCI_HCI = n
CONFIG_SDIO_HCI = y
CONFIG_GSPI_HCI = n
########################## Features ###########################
CONFIG_MP_INCLUDED = y
CONFIG_POWER_SAVING = y
CONFIG_USB_AUTOSUSPEND = n
CONFIG_HW_PWRP_DETECTION = n
CONFIG_WIFI_TEST = n
CONFIG_BT_COEXIST = n
CONFIG_INTEL_WIDI = n
CONFIG_WAPI_SUPPORT = n
CONFIG_EFUSE_CONFIG_FILE = y
CONFIG_EXT_CLK = n
CONFIG_TRAFFIC_PROTECT = n
CONFIG_LOAD_PHY_PARA_FROM_FILE = y
CONFIG_TXPWR_BY_RATE_EN = y
CONFIG_TXPWR_LIMIT_EN = n
CONFIG_RTW_CHPLAN = 0xFF
CONFIG_RTW_ADAPTIVITY_EN = disable
CONFIG_RTW_ADAPTIVITY_MODE = normal
CONFIG_SIGNAL_SCALE_MAPPING = n
CONFIG_80211W = n
CONFIG_REDUCE_TX_CPU_LOADING = n
CONFIG_BR_EXT = y
CONFIG_TDLS = n
CONFIG_WIFI_MONITOR = n
CONFIG_MCC_MODE = n
CONFIG_APPEND_VENDOR_IE_ENABLE = n
CONFIG_RTW_NAPI = y
CONFIG_RTW_GRO = y
CONFIG_RTW_NETIF_SG = y
CONFIG_RTW_IPCAM_APPLICATION = n
CONFIG_RTW_REPEATER_SON = n
CONFIG_RTW_WIFI_HAL = y
########################## Debug ###########################
CONFIG_RTW_DEBUG = y
# default log level is _DRV_INFO_ = 4,
# please refer to "How_to_set_driver_debug_log_level.doc" to set the available level.
CONFIG_RTW_LOG_LEVEL = 4
######################## Wake On Lan ##########################
CONFIG_WOWLAN = n
CONFIG_WAKEUP_TYPE = 0x7 #bit2: deauth, bit1: unicast, bit0: magic pkt.
CONFIG_GPIO_WAKEUP = n
CONFIG_WAKEUP_GPIO_IDX = default
CONFIG_HIGH_ACTIVE = n
CONFIG_PNO_SUPPORT = n
CONFIG_PNO_SET_DEBUG = n
CONFIG_AP_WOWLAN = n
######### Notify SDIO Host Keep Power During Syspend ##########
CONFIG_RTW_SDIO_PM_KEEP_POWER = y
###################### MP HW TX MODE FOR VHT #######################
CONFIG_MP_VHT_HW_TX_MODE = n
###################### Platform Related #######################
CONFIG_PLATFORM_I386_PC = n
CONFIG_PLATFORM_ANDROID_X86 = n
CONFIG_PLATFORM_ANDROID_INTEL_X86 = n
CONFIG_PLATFORM_JB_X86 = n
CONFIG_PLATFORM_ARM_S3C2K4 = n
CONFIG_PLATFORM_ARM_PXA2XX = n
CONFIG_PLATFORM_ARM_S3C6K4 = n
CONFIG_PLATFORM_MIPS_RMI = n
CONFIG_PLATFORM_RTD2880B = n
CONFIG_PLATFORM_MIPS_AR9132 = n
CONFIG_PLATFORM_RTK_DMP = n
CONFIG_PLATFORM_MIPS_PLM = n
CONFIG_PLATFORM_MSTAR389 = n
CONFIG_PLATFORM_MT53XX = n
CONFIG_PLATFORM_ARM_MX51_241H = n
CONFIG_PLATFORM_FS_MX61 = n
CONFIG_PLATFORM_ACTIONS_ATJ227X = n
CONFIG_PLATFORM_TEGRA3_CARDHU = n
CONFIG_PLATFORM_TEGRA4_DALMORE = n
CONFIG_PLATFORM_ARM_TCC8900 = n
CONFIG_PLATFORM_ARM_TCC8920 = n
CONFIG_PLATFORM_ARM_TCC8920_JB42 = n
CONFIG_PLATFORM_ARM_TCC8930_JB42 = n
CONFIG_PLATFORM_ARM_RK2818 = n
CONFIG_PLATFORM_ARM_RK3066 = n
CONFIG_PLATFORM_ARM_RK3188 = n
CONFIG_PLATFORM_ARM_URBETTER = n
CONFIG_PLATFORM_ARM_TI_PANDA = n
CONFIG_PLATFORM_MIPS_JZ4760 = n
CONFIG_PLATFORM_DMP_PHILIPS = n
CONFIG_PLATFORM_MSTAR_TITANIA12 = n
CONFIG_PLATFORM_MSTAR = n
CONFIG_PLATFORM_SZEBOOK = n
CONFIG_PLATFORM_ARM_SUNxI = n
CONFIG_PLATFORM_ARM_SUN6I = n
CONFIG_PLATFORM_ARM_SUN7I = n
CONFIG_PLATFORM_ARM_SUN8I_W3P1 = n
CONFIG_PLATFORM_ARM_SUN8I_W5P1 = n
CONFIG_PLATFORM_ACTIONS_ATM702X = n
CONFIG_PLATFORM_ACTIONS_ATV5201 = n
CONFIG_PLATFORM_ACTIONS_ATM705X = n
CONFIG_PLATFORM_ARM_SUN50IW1P1 = n
CONFIG_PLATFORM_ARM_RTD299X = n
CONFIG_PLATFORM_ARM_SPREADTRUM_6820 = n
CONFIG_PLATFORM_ARM_SPREADTRUM_8810 = n
CONFIG_PLATFORM_ARM_WMT = n
CONFIG_PLATFORM_TI_DM365 = n
CONFIG_PLATFORM_MOZART = n
CONFIG_PLATFORM_RTK119X = n
CONFIG_PLATFORM_RTK129X = n
CONFIG_PLATFORM_RTK390X = n
CONFIG_PLATFORM_NOVATEK_NT72668 = n
CONFIG_PLATFORM_HISILICON = y
CONFIG_PLATFORM_HISILICON_HI3798 = n
CONFIG_PLATFORM_NV_TK1 = n
CONFIG_PLATFORM_NV_TK1_UBUNTU = n
CONFIG_PLATFORM_RTL8197D = n
CONFIG_PLATFORM_AML_S905 = n
CONFIG_PLATFORM_ZTE_ZX296716 = n
###############################################################
CONFIG_DRVEXT_MODULE = n
export TopDIR ?= $(shell pwd)
########### COMMON #################################
ifeq ($(CONFIG_GSPI_HCI), y)
HCI_NAME = gspi
endif
ifeq ($(CONFIG_SDIO_HCI), y)
HCI_NAME = sdio
endif
ifeq ($(CONFIG_USB_HCI), y)
HCI_NAME = usb
endif
ifeq ($(CONFIG_PCI_HCI), y)
HCI_NAME = pci
endif
_OS_INTFS_FILES := os_dep/osdep_service.o \
os_dep/linux/os_intfs.o \
os_dep/linux/$(HCI_NAME)_intf.o \
os_dep/linux/$(HCI_NAME)_ops_linux.o \
os_dep/linux/ioctl_linux.o \
os_dep/linux/xmit_linux.o \
os_dep/linux/mlme_linux.o \
os_dep/linux/recv_linux.o \
os_dep/linux/ioctl_cfg80211.o \
os_dep/linux/rtw_cfgvendor.o \
os_dep/linux/wifi_regd.o \
os_dep/linux/rtw_android.o \
os_dep/linux/rtw_proc.o \
os_dep/linux/rtw_rhashtable.o
ifeq ($(CONFIG_MP_INCLUDED), y)
_OS_INTFS_FILES += os_dep/linux/ioctl_mp.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_OS_INTFS_FILES += os_dep/linux/custom_gpio_linux.o
_OS_INTFS_FILES += os_dep/linux/$(HCI_NAME)_ops_linux.o
endif
ifeq ($(CONFIG_GSPI_HCI), y)
_OS_INTFS_FILES += os_dep/linux/custom_gpio_linux.o
_OS_INTFS_FILES += os_dep/linux/$(HCI_NAME)_ops_linux.o
endif
_HAL_INTFS_FILES := hal/hal_intf.o \
hal/hal_com.o \
hal/hal_com_phycfg.o \
hal/hal_phy.o \
hal/hal_dm.o \
hal/hal_dm_acs.o \
hal/hal_btcoex_wifionly.o \
hal/hal_btcoex.o \
hal/hal_mp.o \
hal/hal_mcc.o \
hal/hal_hci/hal_$(HCI_NAME).o \
hal/led/hal_led.o \
hal/led/hal_$(HCI_NAME)_led.o
EXTRA_CFLAGS += -I$(src)/platform
_PLATFORM_FILES := platform/platform_ops.o
EXTRA_CFLAGS += -I$(src)/hal/btc
########### HAL_RTL8188E #################################
ifeq ($(CONFIG_RTL8188E), y)
RTL871X = rtl8188e
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8189es
endif
ifeq ($(CONFIG_GSPI_HCI), y)
MODULE_NAME = 8189es
endif
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8188eu
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8188ee
endif
EXTRA_CFLAGS += -DCONFIG_RTL8188E
_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8188EPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_xmit.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o
_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8188e_s_fw.o \
hal/$(RTL871X)/hal8188e_t_fw.o \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
ifeq ($(CONFIG_GSPI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
endif
endif
ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188E_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188E_PCIE.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188E_SDIO.o
endif
endif
########### HAL_RTL8192E #################################
ifeq ($(CONFIG_RTL8192E), y)
RTL871X = rtl8192e
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8192es
endif
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8192eu
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8192ee
endif
EXTRA_CFLAGS += -DCONFIG_RTL8192E
_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8192EPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_xmit.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o
_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8192e_fw.o \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
ifeq ($(CONFIG_GSPI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
endif
endif
ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8192E_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8192E_PCIE.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8192E_SDIO.o
endif
ifeq ($(CONFIG_BT_COEXIST), y)
_BTC_FILES += hal/btc/halbtc8192e1ant.o \
hal/btc/halbtc8192e2ant.o
endif
endif
########### HAL_RTL8812A_RTL8821A #################################
ifneq ($(CONFIG_RTL8812A)_$(CONFIG_RTL8821A), n_n)
RTL871X = rtl8812a
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8812au
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8812ae
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8812as
endif
_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8812PwrSeq.o \
hal/$(RTL871X)/Hal8821APwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_xmit.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o
_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
ifeq ($(CONFIG_GSPI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
endif
endif
ifeq ($(CONFIG_RTL8812A), y)
ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8812A_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8812A_PCIE.o
endif
endif
ifeq ($(CONFIG_RTL8821A), y)
ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8821A_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8821A_PCIE.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8821A_SDIO.o
endif
endif
ifeq ($(CONFIG_RTL8812A), y)
EXTRA_CFLAGS += -DCONFIG_RTL8812A
_HAL_INTFS_FILES += hal/rtl8812a/hal8812a_fw.o
endif
ifeq ($(CONFIG_RTL8821A), y)
ifeq ($(CONFIG_RTL8812A), n)
RTL871X = rtl8821a
ifeq ($(CONFIG_USB_HCI), y)
ifeq ($(CONFIG_BT_COEXIST), y)
MODULE_NAME := 8821au
else
MODULE_NAME := 8811au
endif
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME := 8821ae
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME := 8821as
endif
endif
EXTRA_CFLAGS += -DCONFIG_RTL8821A
_HAL_INTFS_FILES += hal/rtl8812a/hal8821a_fw.o
endif
ifeq ($(CONFIG_BT_COEXIST), y)
ifeq ($(CONFIG_RTL8812A), y)
_BTC_FILES += hal/btc/halbtc8812a1ant.o \
hal/btc/halbtc8812a2ant.o
endif
ifeq ($(CONFIG_RTL8821A), y)
_BTC_FILES += hal/btc/halbtc8821a1ant.o \
hal/btc/halbtc8821a2ant.o
endif
endif
endif
########### HAL_RTL8723B #################################
ifeq ($(CONFIG_RTL8723B), y)
RTL871X = rtl8723b
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8723bu
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8723be
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8723bs
endif
EXTRA_CFLAGS += -DCONFIG_RTL8723B
_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8723BPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o
_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8723b_fw.o
_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
endif
ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8723B_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8723B_PCIE.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8723B_SDIO.o
endif
_BTC_FILES += hal/btc/halbtc8723bwifionly.o
ifeq ($(CONFIG_BT_COEXIST), y)
_BTC_FILES += hal/btc/halbtc8723b1ant.o \
hal/btc/halbtc8723b2ant.o
endif
endif
########### HAL_RTL8814A #################################
ifeq ($(CONFIG_RTL8814A), y)
## ADD NEW VHT MP HW TX MODE ##
#EXTRA_CFLAGS += -DCONFIG_MP_VHT_HW_TX_MODE
#CONFIG_MP_VHT_HW_TX_MODE = y
##########################################
RTL871X = rtl8814a
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8814au
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8814ae
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8814as
endif
EXTRA_CFLAGS += -DCONFIG_RTL8814A
_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8814PwrSeq.o \
hal/$(RTL871X)/$(RTL871X)_xmit.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o
_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8814a_fw.o
_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
ifeq ($(CONFIG_GSPI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
endif
endif
ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8814A_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8814A_PCIE.o
endif
endif
########### HAL_RTL8723C #################################
ifeq ($(CONFIG_RTL8723C), y)
RTL871X = rtl8703b
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8723cu
MODULE_SUB_NAME = 8703bu
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8723ce
MODULE_SUB_NAME = 8703be
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8723cs
MODULE_SUB_NAME = 8703bs
endif
EXTRA_CFLAGS += -DCONFIG_RTL8703B
_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8703BPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o
_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8703b_fw.o
_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_recv.o
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
endif
ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8703B_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8703B_PCIE.o
endif
ifeq ($(CONFIG_BT_COEXIST), y)
_BTC_FILES += hal/btc/halbtc8703b1ant.o
endif
endif
########### HAL_RTL8723D #################################
ifeq ($(CONFIG_RTL8723D), y)
RTL871X = rtl8723d
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8723du
MODULE_SUB_NAME = 8723du
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8723de
MODULE_SUB_NAME = 8723de
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8723ds
MODULE_SUB_NAME = 8723ds
endif
EXTRA_CFLAGS += -DCONFIG_RTL8723D
_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8723DPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o
_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8723d_fw.o \
hal/$(RTL871X)/$(RTL871X)_lps_poff.o
_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_SUB_NAME)_recv.o
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
endif
ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8723D_USB.o
endif
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8723D_PCIE.o
endif
ifeq ($(CONFIG_BT_COEXIST), y)
_BTC_FILES += hal/btc/halbtc8723d1ant.o \
hal/btc/halbtc8723d2ant.o
endif
endif
########### HAL_RTL8188F #################################
ifeq ($(CONFIG_RTL8188F), y)
RTL871X = rtl8188f
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8188fu
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8188fe
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8189fs
endif
EXTRA_CFLAGS += -DCONFIG_RTL8188F
_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8188FPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o
_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8188f_fw.o
_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
endif
ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188F_USB.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188F_SDIO.o
endif
endif
########### HAL_RTL8188GTV #################################
ifeq ($(CONFIG_RTL8188GTV), y)
RTL871X = rtl8188gtv
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8188gtvu
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8189gtvs
endif
EXTRA_CFLAGS += -DCONFIG_RTL8188GTV
_HAL_INTFS_FILES += hal/HalPwrSeqCmd.o \
hal/$(RTL871X)/Hal8188GTVPwrSeq.o\
hal/$(RTL871X)/$(RTL871X)_sreset.o
_HAL_INTFS_FILES += hal/$(RTL871X)/$(RTL871X)_hal_init.o \
hal/$(RTL871X)/$(RTL871X)_phycfg.o \
hal/$(RTL871X)/$(RTL871X)_rf6052.o \
hal/$(RTL871X)/$(RTL871X)_dm.o \
hal/$(RTL871X)/$(RTL871X)_rxdesc.o \
hal/$(RTL871X)/$(RTL871X)_cmd.o \
hal/$(RTL871X)/hal8188gtv_fw.o
_HAL_INTFS_FILES += \
hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_halinit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_led.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_xmit.o \
hal/$(RTL871X)/$(HCI_NAME)/rtl$(MODULE_NAME)_recv.o
ifeq ($(CONFIG_PCI_HCI), y)
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops_linux.o
else
_HAL_INTFS_FILES += hal/$(RTL871X)/$(HCI_NAME)/$(HCI_NAME)_ops.o
endif
ifeq ($(CONFIG_USB_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188GTV_USB.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_HAL_INTFS_FILES +=hal/efuse/$(RTL871X)/HalEfuseMask8188GTV_SDIO.o
endif
endif
########### HAL_RTL8822B #################################
ifeq ($(CONFIG_RTL8822B), y)
RTL871X := rtl8822b
ifeq ($(CONFIG_USB_HCI), y)
ifeq ($(CONFIG_BT_COEXIST), n)
MODULE_NAME = 8812bu
else
MODULE_NAME = 88x2bu
endif
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 88x2be
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 88x2bs
endif
endif
########### HAL_RTL8821C #################################
ifeq ($(CONFIG_RTL8821C), y)
RTL871X := rtl8821c
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME = 8821cu
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME = 8821ce
endif
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME = 8821cs
endif
endif
########### AUTO_CFG #################################
ifeq ($(CONFIG_AUTOCFG_CP), y)
ifeq ($(CONFIG_MULTIDRV), y)
$(shell cp $(TopDIR)/autoconf_multidrv_$(HCI_NAME)_linux.h $(TopDIR)/include/autoconf.h)
else
ifeq ($(CONFIG_RTL8188E)$(CONFIG_SDIO_HCI),yy)
$(shell cp $(TopDIR)/autoconf_rtl8189e_$(HCI_NAME)_linux.h $(TopDIR)/include/autoconf.h)
else ifeq ($(CONFIG_RTL8188F)$(CONFIG_SDIO_HCI),yy)
$(shell cp $(TopDIR)/autoconf_rtl8189f_$(HCI_NAME)_linux.h $(TopDIR)/include/autoconf.h)
else ifeq ($(CONFIG_RTL8723C),y)
$(shell cp $(TopDIR)/autoconf_rtl8723c_$(HCI_NAME)_linux.h $(TopDIR)/include/autoconf.h)
else
$(shell cp $(TopDIR)/autoconf_$(RTL871X)_$(HCI_NAME)_linux.h $(TopDIR)/include/autoconf.h)
endif
endif
endif
########### END OF PATH #################################
ifeq ($(CONFIG_USB_HCI), y)
ifeq ($(CONFIG_USB_AUTOSUSPEND), y)
EXTRA_CFLAGS += -DCONFIG_USB_AUTOSUSPEND
endif
endif
ifeq ($(CONFIG_MP_INCLUDED), y)
#MODULE_NAME := $(MODULE_NAME)_mp
EXTRA_CFLAGS += -DCONFIG_MP_INCLUDED
endif
ifeq ($(CONFIG_POWER_SAVING), y)
EXTRA_CFLAGS += -DCONFIG_POWER_SAVING
endif
ifeq ($(CONFIG_HW_PWRP_DETECTION), y)
EXTRA_CFLAGS += -DCONFIG_HW_PWRP_DETECTION
endif
ifeq ($(CONFIG_WIFI_TEST), y)
EXTRA_CFLAGS += -DCONFIG_WIFI_TEST
endif
ifeq ($(CONFIG_BT_COEXIST), y)
EXTRA_CFLAGS += -DCONFIG_BT_COEXIST
endif
ifeq ($(CONFIG_INTEL_WIDI), y)
EXTRA_CFLAGS += -DCONFIG_INTEL_WIDI
endif
ifeq ($(CONFIG_WAPI_SUPPORT), y)
EXTRA_CFLAGS += -DCONFIG_WAPI_SUPPORT
endif
ifeq ($(CONFIG_EFUSE_CONFIG_FILE), y)
EXTRA_CFLAGS += -DCONFIG_EFUSE_CONFIG_FILE
#EFUSE_MAP_PATH
USER_EFUSE_MAP_PATH ?=
ifneq ($(USER_EFUSE_MAP_PATH),)
EXTRA_CFLAGS += -DEFUSE_MAP_PATH=\"$(USER_EFUSE_MAP_PATH)\"
else ifeq ($(MODULE_NAME), 8189es)
EXTRA_CFLAGS += -DEFUSE_MAP_PATH=\"/system/etc/wifi/wifi_efuse_8189e.map\"
else ifeq ($(MODULE_NAME), 8723bs)
EXTRA_CFLAGS += -DEFUSE_MAP_PATH=\"/system/etc/wifi/wifi_efuse_8723bs.map\"
else
EXTRA_CFLAGS += -DEFUSE_MAP_PATH=\"/system/etc/wifi/wifi_efuse_$(MODULE_NAME).map\"
endif
#WIFIMAC_PATH
USER_WIFIMAC_PATH ?=
ifneq ($(USER_WIFIMAC_PATH),)
EXTRA_CFLAGS += -DWIFIMAC_PATH=\"$(USER_WIFIMAC_PATH)\"
else
EXTRA_CFLAGS += -DWIFIMAC_PATH=\"/data/wifimac.txt\"
endif
endif
ifeq ($(CONFIG_EXT_CLK), y)
EXTRA_CFLAGS += -DCONFIG_EXT_CLK
endif
ifeq ($(CONFIG_TRAFFIC_PROTECT), y)
EXTRA_CFLAGS += -DCONFIG_TRAFFIC_PROTECT
endif
ifeq ($(CONFIG_LOAD_PHY_PARA_FROM_FILE), y)
EXTRA_CFLAGS += -DCONFIG_LOAD_PHY_PARA_FROM_FILE
#EXTRA_CFLAGS += -DREALTEK_CONFIG_PATH_WITH_IC_NAME_FOLDER
EXTRA_CFLAGS += -DREALTEK_CONFIG_PATH=\"/lib/firmware/\"
endif
ifeq ($(CONFIG_TXPWR_BY_RATE_EN), n)
EXTRA_CFLAGS += -DCONFIG_TXPWR_BY_RATE_EN=0
else ifeq ($(CONFIG_TXPWR_BY_RATE_EN), y)
EXTRA_CFLAGS += -DCONFIG_TXPWR_BY_RATE_EN=1
else ifeq ($(CONFIG_TXPWR_BY_RATE_EN), auto)
EXTRA_CFLAGS += -DCONFIG_TXPWR_BY_RATE_EN=2
endif
ifeq ($(CONFIG_TXPWR_LIMIT_EN), n)
EXTRA_CFLAGS += -DCONFIG_TXPWR_LIMIT_EN=0
else ifeq ($(CONFIG_TXPWR_LIMIT_EN), y)
EXTRA_CFLAGS += -DCONFIG_TXPWR_LIMIT_EN=1
else ifeq ($(CONFIG_TXPWR_LIMIT_EN), auto)
EXTRA_CFLAGS += -DCONFIG_TXPWR_LIMIT_EN=2
endif
ifneq ($(CONFIG_RTW_CHPLAN), 0xFF)
EXTRA_CFLAGS += -DCONFIG_RTW_CHPLAN=$(CONFIG_RTW_CHPLAN)
endif
ifeq ($(CONFIG_CALIBRATE_TX_POWER_BY_REGULATORY), y)
EXTRA_CFLAGS += -DCONFIG_CALIBRATE_TX_POWER_BY_REGULATORY
endif
ifeq ($(CONFIG_CALIBRATE_TX_POWER_TO_MAX), y)
EXTRA_CFLAGS += -DCONFIG_CALIBRATE_TX_POWER_TO_MAX
endif
ifeq ($(CONFIG_RTW_ADAPTIVITY_EN), disable)
EXTRA_CFLAGS += -DCONFIG_RTW_ADAPTIVITY_EN=0
else ifeq ($(CONFIG_RTW_ADAPTIVITY_EN), enable)
EXTRA_CFLAGS += -DCONFIG_RTW_ADAPTIVITY_EN=1
endif
ifeq ($(CONFIG_RTW_ADAPTIVITY_MODE), normal)
EXTRA_CFLAGS += -DCONFIG_RTW_ADAPTIVITY_MODE=0
else ifeq ($(CONFIG_RTW_ADAPTIVITY_MODE), carrier_sense)
EXTRA_CFLAGS += -DCONFIG_RTW_ADAPTIVITY_MODE=1
endif
ifeq ($(CONFIG_SIGNAL_SCALE_MAPPING), y)
EXTRA_CFLAGS += -DCONFIG_SIGNAL_SCALE_MAPPING
endif
ifeq ($(CONFIG_80211W), y)
EXTRA_CFLAGS += -DCONFIG_IEEE80211W
endif
ifeq ($(CONFIG_WOWLAN), y)
EXTRA_CFLAGS += -DCONFIG_WOWLAN -DRTW_WAKEUP_EVENT=$(CONFIG_WAKEUP_TYPE)
ifeq ($(CONFIG_SDIO_HCI), y)
EXTRA_CFLAGS += -DCONFIG_RTW_SDIO_PM_KEEP_POWER
endif
endif
ifeq ($(CONFIG_AP_WOWLAN), y)
EXTRA_CFLAGS += -DCONFIG_AP_WOWLAN
ifeq ($(CONFIG_SDIO_HCI), y)
EXTRA_CFLAGS += -DCONFIG_RTW_SDIO_PM_KEEP_POWER
endif
endif
ifeq ($(CONFIG_PNO_SUPPORT), y)
EXTRA_CFLAGS += -DCONFIG_PNO_SUPPORT
ifeq ($(CONFIG_PNO_SET_DEBUG), y)
EXTRA_CFLAGS += -DCONFIG_PNO_SET_DEBUG
endif
endif
ifeq ($(CONFIG_GPIO_WAKEUP), y)
EXTRA_CFLAGS += -DCONFIG_GPIO_WAKEUP
ifeq ($(CONFIG_HIGH_ACTIVE), y)
EXTRA_CFLAGS += -DHIGH_ACTIVE=1
else
EXTRA_CFLAGS += -DHIGH_ACTIVE=0
endif
endif
ifneq ($(CONFIG_WAKEUP_GPIO_IDX), default)
EXTRA_CFLAGS += -DWAKEUP_GPIO_IDX=$(CONFIG_WAKEUP_GPIO_IDX)
endif
ifeq ($(CONFIG_RTW_SDIO_PM_KEEP_POWER), y)
ifeq ($(CONFIG_SDIO_HCI), y)
EXTRA_CFLAGS += -DCONFIG_RTW_SDIO_PM_KEEP_POWER
endif
endif
ifeq ($(CONFIG_REDUCE_TX_CPU_LOADING), y)
EXTRA_CFLAGS += -DCONFIG_REDUCE_TX_CPU_LOADING
endif
ifeq ($(CONFIG_BR_EXT), y)
BR_NAME = br0
EXTRA_CFLAGS += -DCONFIG_BR_EXT
EXTRA_CFLAGS += '-DCONFIG_BR_EXT_BRNAME="'$(BR_NAME)'"'
endif
ifeq ($(CONFIG_TDLS), y)
EXTRA_CFLAGS += -DCONFIG_TDLS
endif
ifeq ($(CONFIG_WIFI_MONITOR), y)
EXTRA_CFLAGS += -DCONFIG_WIFI_MONITOR
endif
ifeq ($(CONFIG_MCC_MODE), y)
EXTRA_CFLAGS += -DCONFIG_MCC_MODE
endif
ifeq ($(CONFIG_RTW_NAPI), y)
EXTRA_CFLAGS += -DCONFIG_RTW_NAPI
endif
ifeq ($(CONFIG_RTW_GRO), y)
EXTRA_CFLAGS += -DCONFIG_RTW_GRO
endif
ifeq ($(CONFIG_RTW_REPEATER_SON), y)
EXTRA_CFLAGS += -DCONFIG_RTW_REPEATER_SON
endif
ifeq ($(CONFIG_RTW_IPCAM_APPLICATION), y)
EXTRA_CFLAGS += -DCONFIG_RTW_IPCAM_APPLICATION
ifeq ($(CONFIG_WIFI_MONITOR), n)
EXTRA_CFLAGS += -DCONFIG_WIFI_MONITOR
endif
endif
ifeq ($(CONFIG_RTW_NETIF_SG), y)
EXTRA_CFLAGS += -DCONFIG_RTW_NETIF_SG
endif
ifeq ($(CONFIG_RTW_WIFI_HAL), y)
#EXTRA_CFLAGS += -DCONFIG_RTW_WIFI_HAL_DEBUG
EXTRA_CFLAGS += -DCONFIG_RTW_WIFI_HAL
EXTRA_CFLAGS += -DCONFIG_RTW_CFGVEDNOR_LLSTATS
endif
ifeq ($(CONFIG_MP_VHT_HW_TX_MODE), y)
EXTRA_CFLAGS += -DCONFIG_MP_VHT_HW_TX_MODE
ifeq ($(CONFIG_PLATFORM_I386_PC), y)
## For I386 X86 ToolChain use Hardware FLOATING
EXTRA_CFLAGS += -mhard-float
else
## For ARM ToolChain use Hardware FLOATING
EXTRA_CFLAGS += -mfloat-abi=hard
endif
endif
ifeq ($(CONFIG_APPEND_VENDOR_IE_ENABLE), y)
EXTRA_CFLAGS += -DCONFIG_APPEND_VENDOR_IE_ENABLE
endif
ifeq ($(CONFIG_RTW_DEBUG), y)
EXTRA_CFLAGS += -DCONFIG_RTW_DEBUG
EXTRA_CFLAGS += -DRTW_LOG_LEVEL=$(CONFIG_RTW_LOG_LEVEL)
endif
EXTRA_CFLAGS += -DDM_ODM_SUPPORT_TYPE=0x04
ifeq ($(CONFIG_PLATFORM_I386_PC), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/)
ARCH ?= $(SUBARCH)
CROSS_COMPILE ?=
KVER := $(shell uname -r)
KSRC := /lib/modules/$(KVER)/build
MODDESTDIR := /lib/modules/$(KVER)/kernel/drivers/net/wireless/
INSTALL_PREFIX :=
STAGINGMODDIR := /lib/modules/$(KVER)/kernel/drivers/staging
endif
ifeq ($(CONFIG_PLATFORM_NV_TK1), y)
EXTRA_CFLAGS += -DCONFIG_PLATFORM_NV_TK1
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
# default setting for Android 4.1, 4.2
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_P2P_IPS -DCONFIG_PLATFORM_ANDROID
# Enable this for Android 5.0
EXTRA_CFLAGS += -DCONFIG_RADIO_WORK
EXTRA_CFLAGS += -DRTW_VENDOR_EXT_SUPPORT
EXTRA_CFLAGS += -DRTW_ENABLE_WIFI_CONTROL_FUNC
ARCH ?= arm
CROSS_COMPILE := /mnt/newdisk/android_sdk/nvidia_tk1/android_L/prebuilts/gcc/linux-x86/arm/arm-eabi-4.8/bin/arm-eabi-
KSRC :=/mnt/newdisk/android_sdk/nvidia_tk1/android_L/out/target/product/shieldtablet/obj/KERNEL/
MODULE_NAME = wlan
endif
ifeq ($(CONFIG_PLATFORM_NV_TK1_UBUNTU), y)
EXTRA_CFLAGS += -DCONFIG_PLATFORM_NV_TK1
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
ARCH ?= arm
CROSS_COMPILE ?=
KVER := $(shell uname -r)
KSRC := /lib/modules/$(KVER)/build
MODDESTDIR := /lib/modules/$(KVER)/kernel/drivers/net/wireless/
INSTALL_PREFIX :=
endif
ifeq ($(CONFIG_PLATFORM_ACTIONS_ATM702X), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ANDROID -DCONFIG_PLATFORM_ACTIONS_ATM702X
#ARCH := arm
ARCH := $(R_ARCH)
#CROSS_COMPILE := arm-none-linux-gnueabi-
CROSS_COMPILE := $(R_CROSS_COMPILE)
KVER:= 3.4.0
#KSRC := ../../../../build/out/kernel
KSRC := $(KERNEL_BUILD_PATH)
MODULE_NAME :=wlan
endif
ifeq ($(CONFIG_PLATFORM_ACTIONS_ATM705X), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
#EXTRA_CFLAGS += -DRTW_ENABLE_WIFI_CONTROL_FUNC
# default setting for Android 4.1, 4.2, 4.3, 4.4
EXTRA_CFLAGS += -DCONFIG_PLATFORM_ACTIONS_ATM705X
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
# Enable this for Android 5.0
EXTRA_CFLAGS += -DCONFIG_RADIO_WORK
ifeq ($(CONFIG_SDIO_HCI), y)
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
_PLATFORM_FILES += platform/platform_arm_act_sdio.o
endif
ARCH := arm
CROSS_COMPILE := /opt/arm-2011.09/bin/arm-none-linux-gnueabi-
KSRC := /home/android_sdk/Action-semi/705a_android_L/android/kernel
endif
ifeq ($(CONFIG_PLATFORM_ARM_SUN50IW1P1), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_PLATFORM_ARM_SUN50IW1P1
EXTRA_CFLAGS += -DCONFIG_TRAFFIC_PROTECT
# default setting for Android 4.1, 4.2
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
EXTRA_CFLAGS += -DCONFIG_RESUME_IN_WORKQUEUE
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
# Enable this for Android 5.0
EXTRA_CFLAGS += -DCONFIG_RADIO_WORK
ifeq ($(CONFIG_USB_HCI), y)
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX
_PLATFORM_FILES += platform/platform_ARM_SUNxI_usb.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_PLATFORM_FILES += platform/platform_ARM_SUN50IW1P1_sdio.o
endif
ARCH := arm64
# ===Cross compile setting for Android 5.1(64) SDK ===
CROSS_COMPILE := /home/android_sdk/Allwinner/a64/android-51/lichee/out/sun50iw1p1/android/common/buildroot/external-toolchain/bin/aarch64-linux-gnu-
KSRC :=/home/android_sdk/Allwinner/a64/android-51/lichee/linux-3.10/
endif
ifeq ($(CONFIG_PLATFORM_TI_AM3517), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ANDROID -DCONFIG_PLATFORM_SHUTTLE
CROSS_COMPILE := arm-eabi-
KSRC := $(shell pwd)/../../../Android/kernel
ARCH := arm
endif
ifeq ($(CONFIG_PLATFORM_MSTAR_TITANIA12), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MSTAR -DCONFIG_PLATFORM_MSTAR_TITANIA12
ARCH:=mips
CROSS_COMPILE:= /usr/src/Mstar_kernel/mips-4.3/bin/mips-linux-gnu-
KVER:= 2.6.28.9
KSRC:= /usr/src/Mstar_kernel/2.6.28.9/
endif
ifeq ($(CONFIG_PLATFORM_MSTAR), y)
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_PLATFORM_MSTAR
EXTRA_CFLAGS += -DCONFIG_PLATFORM_MSTAR_HIGH
ifeq ($(CONFIG_USB_HCI), y)
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX -DCONFIG_FIX_NR_BULKIN_BUFFER
endif
ARCH:=arm
CROSS_COMPILE:= /usr/src/bin/arm-none-linux-gnueabi-
KVER:= 3.1.10
KSRC:= /usr/src/Mstar_kernel/3.1.10/
endif
ifeq ($(CONFIG_PLATFORM_ANDROID_X86), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/)
ARCH := $(SUBARCH)
CROSS_COMPILE := /media/DATA-2/android-x86/ics-x86_20120130/prebuilt/linux-x86/toolchain/i686-unknown-linux-gnu-4.2.1/bin/i686-unknown-linux-gnu-
KSRC := /media/DATA-2/android-x86/ics-x86_20120130/out/target/product/generic_x86/obj/kernel
MODULE_NAME :=wlan
endif
ifeq ($(CONFIG_PLATFORM_ANDROID_INTEL_X86), y)
EXTRA_CFLAGS += -DCONFIG_PLATFORM_ANDROID_INTEL_X86
EXTRA_CFLAGS += -DCONFIG_PLATFORM_INTEL_BYT
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ANDROID
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
EXTRA_CFLAGS += -DCONFIG_SKIP_SIGNAL_SCALE_MAPPING
ifeq ($(CONFIG_SDIO_HCI), y)
EXTRA_CFLAGS += -DCONFIG_RESUME_IN_WORKQUEUE
endif
endif
ifeq ($(CONFIG_PLATFORM_JB_X86), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/)
ARCH := $(SUBARCH)
CROSS_COMPILE := /home/android_sdk/android-x86_JB/prebuilts/gcc/linux-x86/x86/i686-linux-android-4.7/bin/i686-linux-android-
KSRC := /home/android_sdk/android-x86_JB/out/target/product/x86/obj/kernel/
MODULE_NAME :=wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_PXA2XX), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ARCH := arm
CROSS_COMPILE := arm-none-linux-gnueabi-
KVER := 2.6.34.1
KSRC ?= /usr/src/linux-2.6.34.1
endif
ifeq ($(CONFIG_PLATFORM_ARM_S3C2K4), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ARCH := arm
CROSS_COMPILE := arm-linux-
KVER := 2.6.24.7_$(ARCH)
KSRC := /usr/src/kernels/linux-$(KVER)
endif
ifeq ($(CONFIG_PLATFORM_ARM_S3C6K4), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ARCH := arm
CROSS_COMPILE := arm-none-linux-gnueabi-
KVER := 2.6.34.1
KSRC ?= /usr/src/linux-2.6.34.1
endif
ifeq ($(CONFIG_PLATFORM_RTD2880B), y)
EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN -DCONFIG_PLATFORM_RTD2880B
ARCH:=
CROSS_COMPILE:=
KVER:=
KSRC:=
endif
ifeq ($(CONFIG_PLATFORM_MIPS_RMI), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ARCH:=mips
CROSS_COMPILE:=mipsisa32r2-uclibc-
KVER:=
KSRC:= /root/work/kernel_realtek
endif
ifeq ($(CONFIG_PLATFORM_MIPS_PLM), y)
EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN
ARCH:=mips
CROSS_COMPILE:=mipsisa32r2-uclibc-
KVER:=
KSRC:= /root/work/kernel_realtek
endif
ifeq ($(CONFIG_PLATFORM_MSTAR389), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MSTAR389
ARCH:=mips
CROSS_COMPILE:= mips-linux-gnu-
KVER:= 2.6.28.10
KSRC:= /home/mstar/mstar_linux/2.6.28.9/
endif
ifeq ($(CONFIG_PLATFORM_MIPS_AR9132), y)
EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN
ARCH := mips
CROSS_COMPILE := mips-openwrt-linux-
KSRC := /home/alex/test_openwrt/tmp/linux-2.6.30.9
endif
ifeq ($(CONFIG_PLATFORM_DMP_PHILIPS), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DRTK_DMP_PLATFORM
ARCH := mips
#CROSS_COMPILE:=/usr/local/msdk-4.3.6-mips-EL-2.6.12.6-0.9.30.3/bin/mipsel-linux-
CROSS_COMPILE:=/usr/local/toolchain_mipsel/bin/mipsel-linux-
KSRC ?=/usr/local/Jupiter/linux-2.6.12
endif
ifeq ($(CONFIG_PLATFORM_RTK_DMP), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DRTK_DMP_PLATFORM -DCONFIG_WIRELESS_EXT
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
ifeq ($(CONFIG_USB_HCI), y)
_PLATFORM_FILES += platform/platform_RTK_DMP_usb.o
endif
ARCH:=mips
CROSS_COMPILE:=mipsel-linux-
KVER:=
KSRC ?= /usr/src/DMP_Kernel/jupiter/linux-2.6.12
endif
ifeq ($(CONFIG_PLATFORM_MT53XX), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MT53XX
ARCH:= arm
CROSS_COMPILE:= arm11_mtk_le-
KVER:= 2.6.27
KSRC?= /proj/mtk00802/BD_Compare/BDP/Dev/BDP_V301/BDP_Linux/linux-2.6.27
endif
ifeq ($(CONFIG_PLATFORM_ARM_MX51_241H), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_WISTRON_PLATFORM
ARCH := arm
CROSS_COMPILE := /opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-
KVER := 2.6.31
KSRC ?= /lib/modules/2.6.31-770-g0e46b52/source
endif
ifeq ($(CONFIG_PLATFORM_FS_MX61), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ARCH := arm
CROSS_COMPILE := /home/share/CusEnv/FreeScale/arm-eabi-4.4.3/bin/arm-eabi-
KSRC ?= /home/share/CusEnv/FreeScale/FS_kernel_env
endif
ifeq ($(CONFIG_PLATFORM_ACTIONS_ATJ227X), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ACTIONS_ATJ227X
ARCH := mips
CROSS_COMPILE := /home/cnsd4/project/actions/tools-2.6.27/bin/mipsel-linux-gnu-
KVER := 2.6.27
KSRC := /home/cnsd4/project/actions/linux-2.6.27.28
endif
ifeq ($(CONFIG_PLATFORM_TI_DM365), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_TI_DM365
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_RX
EXTRA_CFLAGS += -DCONFIG_SINGLE_XMIT_BUF -DCONFIG_SINGLE_RECV_BUF
ARCH := arm
#CROSS_COMPILE := /home/cnsd4/Appro/mv_pro_5.0/montavista/pro/devkit/arm/v5t_le/bin/arm_v5t_le-
#KSRC := /home/cnsd4/Appro/mv_pro_5.0/montavista/pro/devkit/lsp/ti-davinci/linux-dm365
CROSS_COMPILE := /opt/montavista/pro5.0/devkit/arm/v5t_le/bin/arm-linux-
KSRC:= /home/vivotek/lsp/DM365/kernel_platform/kernel/linux-2.6.18
KERNELOUTPUT := ${PRODUCTDIR}/tmp
KVER := 2.6.18
endif
ifeq ($(CONFIG_PLATFORM_MOZART), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_MOZART
ARCH := arm
CROSS_COMPILE := /home/vivotek/lsp/mozart3v2/Mozart3e_Toolchain/build_arm_nofpu/usr/bin/arm-linux-
KVER := $(shell uname -r)
KSRC:= /opt/Vivotek/lsp/mozart3v2/kernel_platform/kernel/mozart_kernel-1.17
KERNELOUTPUT := /home/pink/sample/ODM/IP8136W-VINT/tmp/kernel
endif
ifeq ($(CONFIG_PLATFORM_TEGRA3_CARDHU), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
# default setting for Android 4.1, 4.2
EXTRA_CFLAGS += -DRTW_ENABLE_WIFI_CONTROL_FUNC
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
ARCH := arm
CROSS_COMPILE := /home/android_sdk/nvidia/tegra-16r3-partner-android-4.1_20120723/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
KSRC := /home/android_sdk/nvidia/tegra-16r3-partner-android-4.1_20120723/out/target/product/cardhu/obj/KERNEL
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_TEGRA4_DALMORE), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
# default setting for Android 4.1, 4.2
EXTRA_CFLAGS += -DRTW_ENABLE_WIFI_CONTROL_FUNC
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
ARCH := arm
CROSS_COMPILE := /home/android_sdk/nvidia/tegra-17r9-partner-android-4.2-dalmore_20130131/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-
KSRC := /home/android_sdk/nvidia/tegra-17r9-partner-android-4.2-dalmore_20130131/out/target/product/dalmore/obj/KERNEL
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_TCC8900), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ARCH := arm
CROSS_COMPILE := /home/android_sdk/Telechips/SDK_2304_20110613/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
KSRC := /home/android_sdk/Telechips/SDK_2304_20110613/kernel
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_TCC8920), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ARCH := arm
CROSS_COMPILE := /home/android_sdk/Telechips/v12.06_r1-tcc-android-4.0.4/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
KSRC := /home/android_sdk/Telechips/v12.06_r1-tcc-android-4.0.4/kernel
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_TCC8920_JB42), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
# default setting for Android 4.1, 4.2
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
ARCH := arm
CROSS_COMPILE := /home/android_sdk/Telechips/v13.03_r1-tcc-android-4.2.2_ds_patched/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-
KSRC := /home/android_sdk/Telechips/v13.03_r1-tcc-android-4.2.2_ds_patched/kernel
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_RK2818), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ANDROID -DCONFIG_PLATFORM_ROCKCHIPS
ARCH := arm
CROSS_COMPILE := /usr/src/release_fae_version/toolchain/arm-eabi-4.4.0/bin/arm-eabi-
KSRC := /usr/src/release_fae_version/kernel25_A7_281x
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_RK3188), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ANDROID -DCONFIG_PLATFORM_ROCKCHIPS
# default setting for Android 4.1, 4.2, 4.3, 4.4
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
# default setting for Power control
EXTRA_CFLAGS += -DRTW_ENABLE_WIFI_CONTROL_FUNC
EXTRA_CFLAGS += -DRTW_SUPPORT_PLATFORM_SHUTDOWN
# default setting for Special function
ARCH := arm
CROSS_COMPILE := /home/android_sdk/Rockchip/Rk3188/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-
KSRC := /home/android_sdk/Rockchip/Rk3188/kernel
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_RK3066), y)
EXTRA_CFLAGS += -DCONFIG_PLATFORM_ARM_RK3066
EXTRA_CFLAGS += -DRTW_ENABLE_WIFI_CONTROL_FUNC
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211
ifeq ($(CONFIG_SDIO_HCI), y)
EXTRA_CFLAGS += -DRTW_SUPPORT_PLATFORM_SHUTDOWN
endif
EXTRA_CFLAGS += -fno-pic
ARCH := arm
CROSS_COMPILE := /home/android_sdk/Rockchip/rk3066_20130607/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.6/bin/arm-linux-androideabi-
#CROSS_COMPILE := /home/android_sdk/Rockchip/Rk3066sdk/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.6/bin/arm-linux-androideabi-
KSRC := /home/android_sdk/Rockchip/Rk3066sdk/kernel
MODULE_NAME :=wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_URBETTER), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN #-DCONFIG_MINIMAL_MEMORY_USAGE
ARCH := arm
CROSS_COMPILE := /media/DATA-1/urbetter/arm-2009q3/bin/arm-none-linux-gnueabi-
KSRC := /media/DATA-1/urbetter/ics-urbetter/kernel
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_ARM_TI_PANDA), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN #-DCONFIG_MINIMAL_MEMORY_USAGE
ARCH := arm
#CROSS_COMPILE := /media/DATA-1/aosp/ics-aosp_20111227/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
#KSRC := /media/DATA-1/aosp/android-omap-panda-3.0_20120104
CROSS_COMPILE := /media/DATA-1/android-4.0/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
KSRC := /media/DATA-1/android-4.0/panda_kernel/omap
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_MIPS_JZ4760), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_MINIMAL_MEMORY_USAGE
ARCH ?= mips
CROSS_COMPILE ?= /mnt/sdb5/Ingenic/Umido/mips-4.3/bin/mips-linux-gnu-
KSRC ?= /mnt/sdb5/Ingenic/Umido/kernel
endif
ifeq ($(CONFIG_PLATFORM_SZEBOOK), y)
EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN
ARCH:=arm
CROSS_COMPILE:=/opt/crosstool2/bin/armeb-unknown-linux-gnueabi-
KVER:= 2.6.31.6
KSRC:= ../code/linux-2.6.31.6-2020/
endif
ifeq ($(CONFIG_PLATFORM_ARM_SUNxI), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_PLATFORM_ARM_SUNxI
# default setting for Android 4.1, 4.2
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
ifeq ($(CONFIG_USB_HCI), y)
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX
_PLATFORM_FILES += platform/platform_ARM_SUNxI_usb.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
# default setting for A10-EVB mmc0
#EXTRA_CFLAGS += -DCONFIG_WITS_EVB_V13
_PLATFORM_FILES += platform/platform_ARM_SUNxI_sdio.o
endif
ARCH := arm
#CROSS_COMPILE := arm-none-linux-gnueabi-
CROSS_COMPILE=/home/android_sdk/Allwinner/a10/android-jb42/lichee-jb42/buildroot/output/external-toolchain/bin/arm-none-linux-gnueabi-
KVER := 3.0.8
#KSRC:= ../lichee/linux-3.0/
KSRC=/home/android_sdk/Allwinner/a10/android-jb42/lichee-jb42/linux-3.0
endif
ifeq ($(CONFIG_PLATFORM_ARM_SUN6I), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_PLATFORM_ARM_SUN6I
EXTRA_CFLAGS += -DCONFIG_TRAFFIC_PROTECT
# default setting for Android 4.1, 4.2, 4.3, 4.4
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
EXTRA_CFLAGS += -DCONFIG_QOS_OPTIMIZATION
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
ifeq ($(CONFIG_USB_HCI), y)
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX
_PLATFORM_FILES += platform/platform_ARM_SUNxI_usb.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
# default setting for A31-EVB mmc0
EXTRA_CFLAGS += -DCONFIG_A31_EVB
_PLATFORM_FILES += platform/platform_ARM_SUNnI_sdio.o
endif
ARCH := arm
#Android-JB42
#CROSS_COMPILE := /home/android_sdk/Allwinner/a31/android-jb42/lichee/buildroot/output/external-toolchain/bin/arm-linux-gnueabi-
#KSRC :=/home/android_sdk/Allwinner/a31/android-jb42/lichee/linux-3.3
#ifeq ($(CONFIG_USB_HCI), y)
#MODULE_NAME := 8188eu_sw
#endif
# ==== Cross compile setting for kitkat-a3x_v4.5 =====
CROSS_COMPILE := /home/android_sdk/Allwinner/a31/kitkat-a3x_v4.5/lichee/buildroot/output/external-toolchain/bin/arm-linux-gnueabi-
KSRC :=/home/android_sdk/Allwinner/a31/kitkat-a3x_v4.5/lichee/linux-3.3
endif
ifeq ($(CONFIG_PLATFORM_ARM_SUN7I), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_PLATFORM_ARM_SUN7I
EXTRA_CFLAGS += -DCONFIG_TRAFFIC_PROTECT
# default setting for Android 4.1, 4.2, 4.3, 4.4
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
EXTRA_CFLAGS += -DCONFIG_QOS_OPTIMIZATION
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
ifeq ($(CONFIG_USB_HCI), y)
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX
_PLATFORM_FILES += platform/platform_ARM_SUNxI_usb.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_PLATFORM_FILES += platform/platform_ARM_SUNnI_sdio.o
endif
ARCH := arm
# ===Cross compile setting for Android 4.2 SDK ===
#CROSS_COMPILE := /home/android_sdk/Allwinner/a20_evb/lichee/out/android/common/buildroot/external-toolchain/bin/arm-linux-gnueabi-
#KSRC := /home/android_sdk/Allwinner/a20_evb/lichee/linux-3.3
# ==== Cross compile setting for Android 4.3 SDK =====
#CROSS_COMPILE := /home/android_sdk/Allwinner/a20/android-jb43/lichee/out/android/common/buildroot/external-toolchain/bin/arm-linux-gnueabi-
#KSRC := /home/android_sdk/Allwinner/a20/android-jb43/lichee/linux-3.4
# ==== Cross compile setting for kitkat-a20_v4.4 =====
CROSS_COMPILE := /home/android_sdk/Allwinner/a20/kitkat-a20_v4.4/lichee/out/android/common/buildroot/external-toolchain/bin/arm-linux-gnueabi-
KSRC := /home/android_sdk/Allwinner/a20/kitkat-a20_v4.4/lichee/linux-3.4
endif
ifeq ($(CONFIG_PLATFORM_ARM_SUN8I_W3P1), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_PLATFORM_ARM_SUN8I
EXTRA_CFLAGS += -DCONFIG_PLATFORM_ARM_SUN8I_W3P1
EXTRA_CFLAGS += -DCONFIG_TRAFFIC_PROTECT
# default setting for Android 4.1, 4.2
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
ifeq ($(CONFIG_USB_HCI), y)
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX
_PLATFORM_FILES += platform/platform_ARM_SUNxI_usb.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_PLATFORM_FILES += platform/platform_ARM_SUNnI_sdio.o
endif
ARCH := arm
# ===Cross compile setting for Android 4.2 SDK ===
#CROSS_COMPILE := /home/android_sdk/Allwinner/a23/android-jb42/lichee/out/android/common/buildroot/external-toolchain/bin/arm-linux-gnueabi-
#KSRC :=/home/android_sdk/Allwinner/a23/android-jb42/lichee/linux-3.4
# ===Cross compile setting for Android 4.4 SDK ===
CROSS_COMPILE := /home/android_sdk/Allwinner/a23/android-kk44/lichee/out/android/common/buildroot/external-toolchain/bin/arm-linux-gnueabi-
KSRC :=/home/android_sdk/Allwinner/a23/android-kk44/lichee/linux-3.4
endif
ifeq ($(CONFIG_PLATFORM_ARM_SUN8I_W5P1), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_PLATFORM_ARM_SUN8I
EXTRA_CFLAGS += -DCONFIG_PLATFORM_ARM_SUN8I_W5P1
EXTRA_CFLAGS += -DCONFIG_TRAFFIC_PROTECT
# default setting for Android 4.1, 4.2
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
# Enable this for Android 5.0
EXTRA_CFLAGS += -DCONFIG_RADIO_WORK
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
ifeq ($(CONFIG_USB_HCI), y)
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX
_PLATFORM_FILES += platform/platform_ARM_SUNxI_usb.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_PLATFORM_FILES += platform/platform_ARM_SUNnI_sdio.o
endif
ARCH := arm
# ===Cross compile setting for Android L SDK ===
CROSS_COMPILE := /home/android_sdk/Allwinner/a33/android-L/lichee/out/sun8iw5p1/android/common/buildroot/external-toolchain/bin/arm-linux-gnueabi-
KSRC :=/home/android_sdk/Allwinner/a33/android-L/lichee/linux-3.4
endif
ifeq ($(CONFIG_PLATFORM_ACTIONS_ATV5201), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_ACTIONS_ATV5201
EXTRA_CFLAGS += -DCONFIG_SDIO_DISABLE_RXFIFO_POLLING_LOOP
ARCH := mips
CROSS_COMPILE := mipsel-linux-gnu-
KVER := $(KERNEL_VER)
KSRC:= $(CFGDIR)/../../kernel/linux-$(KERNEL_VER)
endif
ifeq ($(CONFIG_PLATFORM_ARM_RTD299X), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
ifeq ($(CONFIG_ANDROID), y)
# Enable this for Android 5.0
EXTRA_CFLAGS += -DCONFIG_RADIO_WORK
endif
#ARCH, CROSS_COMPILE, KSRC,and MODDESTDIR are provided by external makefile
INSTALL_PREFIX :=
endif
ifeq ($(CONFIG_PLATFORM_HISILICON), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -DCONFIG_PLATFORM_HISILICON
ifeq ($(SUPPORT_CONCURRENT),y)
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
endif
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
ARCH := arm
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE = arm-himix100-linux-
endif
MODULE_NAME := rtl8192eu
ifeq ($(KSRC),)
KSRC := ../../../../
endif
endif
ifeq ($(CONFIG_PLATFORM_HISILICON_HI3798), y)
EXTRA_CFLAGS += -DCONFIG_PLATFORM_HISILICON
EXTRA_CFLAGS += -DCONFIG_PLATFORM_HISILICON_HI3798
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
# default setting for Android
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211
EXTRA_CFLAGS += -DRTW_USE_CFG80211_STA_EVENT
# default setting for Android 5.x and later
#EXTRA_CFLAGS += -DCONFIG_RADIO_WORK
ifeq ($(CONFIG_SDIO_HCI), y)
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
_PLATFORM_FILES += platform/platform_hisilicon_hi3798_sdio.o
EXTRA_CFLAGS += -DCONFIG_HISI_SDIO_ID=1
endif
ARCH ?= arm
CROSS_COMPILE ?= /HiSTBAndroidV600R003C00SPC021_git_0512/device/hisilicon/bigfish/sdk/tools/linux/toolchains/arm-histbv310-linux/bin/arm-histbv310-linux-
ifndef KSRC
KSRC := /HiSTBAndroidV600R003C00SPC021_git_0512/device/hisilicon/bigfish/sdk/source/kernel/linux-3.18.y
KSRC += O=/HiSTBAndroidV600R003C00SPC021_git_0512/out/target/product/Hi3798MV200/obj/KERNEL_OBJ
endif
ifeq ($(CONFIG_RTL8822B), y)
ifeq ($(CONFIG_SDIO_HCI), y)
CONFIG_RTL8822BS ?= m
USER_MODULE_NAME := rtl8822bs
endif
endif
endif
# Platform setting
ifeq ($(CONFIG_PLATFORM_ARM_SPREADTRUM_6820), y)
ifeq ($(CONFIG_ANDROID_2X), y)
EXTRA_CFLAGS += -DANDROID_2X
endif
EXTRA_CFLAGS += -DCONFIG_PLATFORM_SPRD
EXTRA_CFLAGS += -DPLATFORM_SPREADTRUM_6820
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ifeq ($(RTL871X), rtl8188e)
EXTRA_CFLAGS += -DSOFTAP_PS_DURATION=50
endif
ifeq ($(CONFIG_SDIO_HCI), y)
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
_PLATFORM_FILES += platform/platform_sprd_sdio.o
endif
endif
ifeq ($(CONFIG_PLATFORM_ARM_SPREADTRUM_8810), y)
ifeq ($(CONFIG_ANDROID_2X), y)
EXTRA_CFLAGS += -DANDROID_2X
endif
EXTRA_CFLAGS += -DCONFIG_PLATFORM_SPRD
EXTRA_CFLAGS += -DPLATFORM_SPREADTRUM_8810
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
ifeq ($(RTL871X), rtl8188e)
EXTRA_CFLAGS += -DSOFTAP_PS_DURATION=50
endif
ifeq ($(CONFIG_SDIO_HCI), y)
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
_PLATFORM_FILES += platform/platform_sprd_sdio.o
endif
endif
ifeq ($(CONFIG_PLATFORM_ARM_WMT), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
ifeq ($(CONFIG_SDIO_HCI), y)
_PLATFORM_FILES += platform/platform_ARM_WMT_sdio.o
endif
ARCH := arm
CROSS_COMPILE := /home/android_sdk/WonderMedia/wm8880-android4.4/toolchain/arm_201103_gcc4.5.2/mybin/arm_1103_le-
KSRC := /home/android_sdk/WonderMedia/wm8880-android4.4/kernel4.4/
MODULE_NAME :=8189es_kk
endif
ifeq ($(CONFIG_PLATFORM_RTK119X), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
#EXTRA_CFLAGS += -DCONFIG_PLATFORM_ARM_SUN7I
EXTRA_CFLAGS += -DCONFIG_TRAFFIC_PROTECT
# default setting for Android 4.1, 4.2
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IFACE_NUMBER=3
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
#EXTRA_CFLAGS += -DCONFIG_QOS_OPTIMIZATION
EXTRA_CFLAGS += -DCONFIG_QOS_OPTIMIZATION
#EXTRA_CFLAGS += -DCONFIG_#PLATFORM_OPS
ifeq ($(CONFIG_USB_HCI), y)
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX
#_PLATFORM_FILES += platform/platform_ARM_SUNxI_usb.o
endif
ifeq ($(CONFIG_SDIO_HCI), y)
_PLATFORM_FILES += platform/platform_ARM_SUNnI_sdio.o
endif
ARCH := arm
# ==== Cross compile setting for Android 4.4 SDK =====
#CROSS_COMPILE := arm-linux-gnueabihf-
KVER := 3.10.24
#KSRC :=/home/android_sdk/Allwinner/a20/android-kitkat44/lichee/linux-3.4
CROSS_COMPILE := /home/realtek/software_phoenix/phoenix/toolchain/usr/local/arm-2013.11/bin/arm-linux-gnueabihf-
KSRC := /home/realtek/software_phoenix/linux-kernel
MODULE_NAME := 8192eu
endif
ifeq ($(CONFIG_PLATFORM_RTK129X), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DRTK_129X_PLATFORM
EXTRA_CFLAGS += -DCONFIG_TRAFFIC_PROTECT
# default setting for Android 4.1, 4.2
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
#EXTRA_CFLAGS += -DCONFIG_P2P_IPS -DCONFIG_QOS_OPTIMIZATION
EXTRA_CFLAGS += -DCONFIG_QOS_OPTIMIZATION
# Enable this for Android 5.0
EXTRA_CFLAGS += -DCONFIG_RADIO_WORK
ifeq ($(CONFIG_RTL8821C)$(CONFIG_SDIO_HCI),yy)
EXTRA_CFLAGS += -DCONFIG_WAKEUP_GPIO_INPUT_MODE
EXTRA_CFLAGS += -DCONFIG_BT_WAKE_HST_OPEN_DRAIN
endif
EXTRA_CFLAGS += -Wno-error=date-time
# default setting for Android 7.0
ifeq ($(RTK_ANDROID_VERSION), nougat)
EXTRA_CFLAGS += -DRTW_P2P_GROUP_INTERFACE=1
endif
#EXTRA_CFLAGS += -DCONFIG_#PLATFORM_OPS
ifeq ($(CONFIG_USB_HCI), y)
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX
endif
ARCH := arm64
# ==== Cross compile setting for Android 4.4 SDK =====
#CROSS_COMPILE := arm-linux-gnueabihf-
#KVER := 4.1.10
#CROSS_COMPILE := $(CROSS)
#KSRC := $(LINUX_KERNEL_PATH)
CROSS_COMPILE := /home/android_sdk/DHC/trunk-6.0.0_r1-QA160627/phoenix/toolchain/asdk64-4.9.4-a53-EL-3.10-g2.19-a64nt-160307/bin/asdk64-linux-
KSRC := /home/android_sdk/DHC/trunk-6.0.0_r1-QA160627/linux-kernel
endif
ifeq ($(CONFIG_PLATFORM_RTK390X), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_PLATFORM_RTK390X
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
EXTRA_CFLAGS += -DCONFIG_RTW_NETIF_SG
ifeq ($(CONFIG_USB_HCI), y)
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX
endif
ARCH:=rlx
CROSS_COMPILE:=mips-linux-
KSRC:= /home/realtek/share/Develop/IPCAM_SDK/RealSil/rts3901_sdk_v1.2_vanilla/linux-3.10
endif
ifeq ($(CONFIG_PLATFORM_NOVATEK_NT72668), y)
EXTRA_CFLAGS += -DCONFIG_PLATFORM_NOVATEK_NT72668
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_RX
EXTRA_CFLAGS += -DCONFIG_USE_USB_BUFFER_ALLOC_TX
ARCH ?= arm
CROSS_COMPILE := arm-linux-gnueabihf-
KVER := 3.8.0
KSRC := /Custom/Novatek/TCL/linux-3.8_header
#KSRC := $(KERNELDIR)
endif
ifeq ($(CONFIG_PLATFORM_ARM_TCC8930_JB42), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
# default setting for Android 4.1, 4.2
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT
ARCH := arm
CROSS_COMPILE := /home/android_sdk/Telechips/v13.05_r1-tcc-android-4.2.2_tcc893x-evm_build/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-
KSRC := /home/android_sdk/Telechips/v13.05_r1-tcc-android-4.2.2_tcc893x-evm_build/kernel
MODULE_NAME := wlan
endif
ifeq ($(CONFIG_PLATFORM_RTL8197D), y)
EXTRA_CFLAGS += -DCONFIG_BIG_ENDIAN -DCONFIG_PLATFORM_RTL8197D
export DIR_LINUX=$(shell pwd)/../SDK/rlxlinux-sdk321-v50/linux-2.6.30
ARCH ?= rlx
CROSS_COMPILE:= $(DIR_LINUX)/../toolchain/rsdk-1.5.5-5281-EB-2.6.30-0.9.30.3-110714/bin/rsdk-linux-
KSRC := $(DIR_LINUX)
endif
ifeq ($(CONFIG_PLATFORM_AML_S905), y)
EXTRA_CFLAGS += -DCONFIG_PLATFORM_AML_S905
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN -fno-pic
# default setting for Android
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211
EXTRA_CFLAGS += -DRTW_USE_CFG80211_STA_EVENT
# default setting for Android 5.x and later
EXTRA_CFLAGS += -DCONFIG_RADIO_WORK
ifeq ($(CONFIG_SDIO_HCI), y)
EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
_PLATFORM_FILES += platform/platform_aml_s905_sdio.o
endif
ARCH ?= arm64
CROSS_COMPILE ?= /4.4_S905L_8822bs_compile/gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux/bin/aarch64-linux-gnu-
ifndef KSRC
KSRC := /4.4_S905L_8822bs_compile/common
# To locate output files in a separate directory.
KSRC += O=/4.4_S905L_8822bs_compile/KERNEL_OBJ
endif
ifeq ($(CONFIG_RTL8822B), y)
ifeq ($(CONFIG_SDIO_HCI), y)
CONFIG_RTL8822BS ?= m
USER_MODULE_NAME := 8822bs
endif
endif
endif
ifeq ($(CONFIG_PLATFORM_ZTE_ZX296716), y)
EXTRA_CFLAGS += -Wno-error=date-time
EXTRA_CFLAGS += -DCONFIG_PLATFORM_ZTE_ZX296716
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
# default setting for Android
EXTRA_CFLAGS += -DCONFIG_CONCURRENT_MODE
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211
EXTRA_CFLAGS += -DRTW_USE_CFG80211_STA_EVENT
# default setting for Android 5.x and later
#EXTRA_CFLAGS += -DCONFIG_RADIO_WORK
ifeq ($(CONFIG_SDIO_HCI), y)
# mark this temporarily
#EXTRA_CFLAGS += -DCONFIG_PLATFORM_OPS
#_PLATFORM_FILES += platform/platform_zte_zx296716_sdio.o
endif
ARCH ?= arm64
CROSS_COMPILE ?=
KSRC ?=
ifeq ($(CONFIG_RTL8822B), y)
ifeq ($(CONFIG_SDIO_HCI), y)
CONFIG_RTL8822BS ?= m
USER_MODULE_NAME := 8822bs
endif
endif
endif
ifeq ($(CONFIG_MULTIDRV), y)
ifeq ($(CONFIG_SDIO_HCI), y)
MODULE_NAME := rtw_sdio
endif
ifeq ($(CONFIG_USB_HCI), y)
MODULE_NAME := rtw_usb
endif
ifeq ($(CONFIG_PCI_HCI), y)
MODULE_NAME := rtw_pci
endif
endif
USER_MODULE_NAME ?=
ifneq ($(USER_MODULE_NAME),)
MODULE_NAME := $(USER_MODULE_NAME)
endif
ifneq ($(KERNELRELEASE),)
########### this part for *.mk ############################
include $(src)/hal/phydm/phydm.mk
########### HAL_RTL8822B #################################
ifeq ($(CONFIG_RTL8822B), y)
include $(src)/rtl8822b.mk
endif
########### HAL_RTL8821C #################################
ifeq ($(CONFIG_RTL8821C), y)
include $(src)/rtl8821c.mk
endif
rtk_core := core/rtw_cmd.o \
core/rtw_security.o \
core/rtw_debug.o \
core/rtw_io.o \
core/rtw_ioctl_query.o \
core/rtw_ioctl_set.o \
core/rtw_ieee80211.o \
core/rtw_mlme.o \
core/rtw_mlme_ext.o \
core/rtw_mi.o \
core/rtw_wlan_util.o \
core/rtw_vht.o \
core/rtw_pwrctrl.o \
core/rtw_rf.o \
core/rtw_recv.o \
core/rtw_sta_mgt.o \
core/rtw_ap.o \
core/mesh/rtw_mesh.o \
core/mesh/rtw_mesh_pathtbl.o \
core/mesh/rtw_mesh_hwmp.o \
core/rtw_xmit.o \
core/rtw_p2p.o \
core/rtw_rson.o \
core/rtw_tdls.o \
core/rtw_br_ext.o \
core/rtw_iol.o \
core/rtw_sreset.o \
core/rtw_btcoex_wifionly.o \
core/rtw_btcoex.o \
core/rtw_beamforming.o \
core/rtw_odm.o \
core/rtw_rm.o \
core/rtw_rm_fsm.o \
core/efuse/rtw_efuse.o
ifeq ($(CONFIG_SDIO_HCI), y)
rtk_core += core/rtw_sdio.o
endif
$(MODULE_NAME)-y += $(rtk_core)
$(MODULE_NAME)-$(CONFIG_INTEL_WIDI) += core/rtw_intel_widi.o
$(MODULE_NAME)-$(CONFIG_WAPI_SUPPORT) += core/rtw_wapi.o \
core/rtw_wapi_sms4.o
$(MODULE_NAME)-y += $(_OS_INTFS_FILES)
$(MODULE_NAME)-y += $(_HAL_INTFS_FILES)
$(MODULE_NAME)-y += $(_PHYDM_FILES)
$(MODULE_NAME)-y += $(_BTC_FILES)
$(MODULE_NAME)-y += $(_PLATFORM_FILES)
$(MODULE_NAME)-$(CONFIG_MP_INCLUDED) += core/rtw_mp.o
ifeq ($(CONFIG_RTL8723B), y)
$(MODULE_NAME)-$(CONFIG_MP_INCLUDED)+= core/rtw_bt_mp.o
endif
obj-$(CONFIG_RTL8189FS) := $(MODULE_NAME).o
else
export CONFIG_RTL8189FS = m
all: modules
modules:
$(MAKE) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) -C $(KSRC) M=$(shell pwd) modules
strip:
$(CROSS_COMPILE)strip $(MODULE_NAME).ko --strip-unneeded
install:
install -p -m 644 $(MODULE_NAME).ko $(MODDESTDIR)
/sbin/depmod -a ${KVER}
uninstall:
rm -f $(MODDESTDIR)/$(MODULE_NAME).ko
/sbin/depmod -a ${KVER}
backup_rtlwifi:
@echo "Making backup rtlwifi drivers"
ifneq (,$(wildcard $(STAGINGMODDIR)/rtl*))
@tar cPf $(wildcard $(STAGINGMODDIR))/backup_rtlwifi_driver.tar $(wildcard $(STAGINGMODDIR)/rtl*)
@rm -rf $(wildcard $(STAGINGMODDIR)/rtl*)
endif
ifneq (,$(wildcard $(MODDESTDIR)realtek))
@tar cPf $(MODDESTDIR)backup_rtlwifi_driver.tar $(MODDESTDIR)realtek
@rm -fr $(MODDESTDIR)realtek
endif
ifneq (,$(wildcard $(MODDESTDIR)rtl*))
@tar cPf $(MODDESTDIR)../backup_rtlwifi_driver.tar $(wildcard $(MODDESTDIR)rtl*)
@rm -fr $(wildcard $(MODDESTDIR)rtl*)
endif
@/sbin/depmod -a ${KVER}
@echo "Please reboot your system"
restore_rtlwifi:
@echo "Restoring backups"
ifneq (,$(wildcard $(STAGINGMODDIR)/backup_rtlwifi_driver.tar))
@tar xPf $(STAGINGMODDIR)/backup_rtlwifi_driver.tar
@rm $(STAGINGMODDIR)/backup_rtlwifi_driver.tar
endif
ifneq (,$(wildcard $(MODDESTDIR)backup_rtlwifi_driver.tar))
@tar xPf $(MODDESTDIR)backup_rtlwifi_driver.tar
@rm $(MODDESTDIR)backup_rtlwifi_driver.tar
endif
ifneq (,$(wildcard $(MODDESTDIR)../backup_rtlwifi_driver.tar))
@tar xPf $(MODDESTDIR)../backup_rtlwifi_driver.tar
@rm $(MODDESTDIR)../backup_rtlwifi_driver.tar
endif
@/sbin/depmod -a ${KVER}
@echo "Please reboot your system"
config_r:
@echo "make config"
/bin/bash script/Configure script/config.in
.PHONY: modules clean
clean:
#$(MAKE) -C $(KSRC) M=$(shell pwd) clean
cd hal ; rm -fr */*/*/*.mod.c */*/*/*.mod */*/*/*.o */*/*/.*.cmd */*/*/*.ko
cd hal ; rm -fr */*/*.mod.c */*/*.mod */*/*.o */*/.*.cmd */*/*.ko
cd hal ; rm -fr */*.mod.c */*.mod */*.o */.*.cmd */*.ko
cd hal ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd core ; rm -fr */*.mod.c */*.mod */*.o */.*.cmd */*.ko
cd core ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd os_dep/linux ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd os_dep ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd platform ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
rm -fr Module.symvers ; rm -fr Module.markers ; rm -fr modules.order
rm -fr *.mod.c *.mod *.o .*.cmd *.ko *~
rm -fr .tmp_versions
endif
3.编译模块驱动文件
在 osdrv/opensource/kernel/linux-4.9.y 目录下执行
make ARCH=arm CROSS_COMPILE=arm-himix100-linux- modules编译完成之后,就可以在 osdrv/opensource/kernel/linux-4.9.y/drivers/net/wireless/rtl8189FS 目录下找到 rtl8192eu.ko 文件。
二、参考海思的《WiFi 使用指南.pdf》开启内核其他配置
以下全部来时海思的参考文档
cap-sdio-irq我是直接添加在 hi3556v200.dtsi 文件mmc1这个设备节点里面。如下图所示
这个Boot配置要强烈说一下,文档中说“配置方法请参考 Boot 表格配置文档” 。我基本上找了代理给的开发文档，都没有找到一份关于Boot表格的配置文档的资料。不知道是海思没有提供给代理商，还是确实没有，最终让我们项目进展整整delay了2个星期。最终,还是让代理FAE直接教我们(刚刚接触海思平台,不知道他们怎么玩的)。通过 Hi3556V200_PINOUT_CN.xlsx 的描述,配置在 osdrv/tools/pc/uboot_tools 目录下的 Hi3556V200-DMEB-DDR3_1800M_16bit_128MB-A7_900M-SYSBUS_300M.xlsm 文件，将SDIO1的各个IO复用为sdio1的功能(不理解海思团队为什么在内核勾选了启动mmc1,竟然不会在驱动中自动初始化对应的IO为sdio功能)。
搞完以上以后，重新编译一下uboot跟kernel，并重新下载到开发板子。
三、在开发板上调用驱动
1、将内核的 cfg80211.ko 跟 rtl8192eu.ko 拷贝到设备上
2、加载mmc相关驱动,海思提供 /app/komod/mmc_load.sh 脚本，直接运行即可
3、加载 cfg80211.ko 模块驱动文件
insmod cfg80211.ko4、加载 rtl8192eu.ko 模块驱动文件
insmod rtl8192eu.ko5、查看网络接口
ifconfig -a
四、简单的wifi测试
以下会用到一些工具软件，如 iwlist/wpa_supplicant/iwconfig/hostapd 都在RTL8189的代码中，请自行编译。
1、启用Wifi网口
ifconfig wlan0 up
2、扫码热点AP
iwlist wlan0 scanLog如下，去掉了部分敏感热点信息
[ 559.484371] RTW: _rtw_pwr_wakeup call ips_leave....
[ 559.489293] RTW: ==>ips_leave cnts:1
[ 559.492894] RTW: ===> rtw_ips_pwr_up..............
[ 559.497808] RTW: ===> ips_netdrv_open.........
[ 559.502368] RTW: FW does not exist before power on!!
[ 559.507671] RTW: SetHwReg8188F: hci_sus_state=1
[ 559.513636] RTW: SetHwReg: bMacPwrCtrlOn=1
[ 559.517758] RTW: SetHwReg8188F: hci_sus_state=2
[ 559.522419] RTW: sdio_power_on_check: val_mix:0x0000063f, res:0x0000063f
[ 559.529148] RTW: sdio_power_on_check: 0x100 the result of cmd52 and cmd53 is the same.
[ 559.537199] RTW: sdio_power_on_check: 0x1B8 test Pass.
[ 559.542363] RTW: Power on ok!
[ 559.545432] RTW: rtl8188f_FirmwareDownload(wlan0) tmp_ps=3
[ 559.550940] RTW: rtl8188f_FirmwareDownload fw: FW_NIC, size: 20306
[ 559.557133] RTW: rtl8188f_FirmwareDownload: fw_ver=e fw_subver=0000 sig=0x88f1, Month=06, Date=07, Hour=17, Minute=18
[ 559.567757] RTW: rtl8188f_FirmwareDownload(): Shift for fw header!
[ 559.573946] RTW: rtl8188f_FirmwareDownload by IO write!
[ 559.677453] RTW: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00040505
[ 559.685905] RTW: _8051Reset8188: Finish
[ 559.699422] RTW: _FWFreeToGo: Polling FW ready OK! (314, 15ms), REG_MCUFWDL:0x000405c6
[ 559.707364] RTW: rtl8188f_FirmwareDownload: DLFW OK !
[ 559.712449] RTW: rtl8188f_FirmwareDownload success. write_fw:1, 140ms
[ 559.718932] RTW: <=== rtl8188f_FirmwareDownload()
[ 559.723742] RTW: HalDetectPwrDownMode(): PDN=0
[ 559.728198] RTW: Set RF Chip ID to RF_6052 and RF type to 0.
[ 560.070352] RTW: rtw_hal_set_macaddr_port wlan0- hw port(0) mac_addr =74:ee:2a:22:5c:48
[ 560.078514] RTW: rtw_hal_get_macaddr_port wlan0- hw port(0) mac_addr =74:ee:2a:22:5c:48
[ 560.086548] RTW: wlan0- hw port(0) mac_addr =74:ee:2a:22:5c:48
[ 560.092458] RTW: [HW_VAR_ENABLE_RX_BAR] 0x6A2=0x500
[ 560.099137] RTW: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:2
[ 560.107866] RTW: kfree gain_offset 0x55:0x82060 [ 560.113018] RTW: after :0x8a060
[ 560.116413] RTW: <=== rtw_ips_pwr_up.............. in 620ms
[ 560.122100] RTW: nolinked power save leave
[ 560.126232] RTW: ==> ips_leave.....LED(0x00028282)...
[ 560.131464] RTW: wlan0 sleep m0=0x00000002, ori reg_0x4d4=0x00000000
[ 561.743603] RTW: wlan0 wakeup m0=0x00000002, ori reg_0x4d4=0x00000002
[ 561.750201] RTW: survey done event(3e) band:0 for wlan0
[ 561.755590] RTW: rtw_indicate_scan_done(wlan0)
wlan0 Scan completed :
Cell 01 - Address: 38:E2:DD:19:E9:88
ESSID:"ChinaNet-iUDF"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.427 GHz (Channel 4)
Encryption key:on
Bit Rates:144 Mb/s
Extra:wpa_ie=dd1a0050f20101000050f20202000050f2020050f20401000050f202
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Extra:
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD7D0050F204104A0001101044000102103B00010310470010BC329E001DD811B2860138E2DD19E989102100035A54451023000C5A58484E20476174655761791024000456312E301042000831323334353637381054000800060050F2040001101100065A544520415010080002210C103C0001011049000600372A000120
Quality=66/100 Signal level=39/100
Extra:fm=0003
Cell 03 - Address: D8:15:0D:D5:B0:C6
ESSID:"jzly"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:300 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=20/100 Signal level=20/100
Extra:fm=0001
Cell 04 - Address: 9A:8A:20:49:07:95
ESSID:"SunnysideDaycare"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:14[ 562.009633] RTW: ==>rtw_ps_processor .fw_state(0)
4 Mb/s
Extr[ 562.016415] RTW: ==>ips_enter cnts:2
a:rsn_ie=30140100000fac040100000[ 562.022754] RTW: nolinked power save enter
fac040100000fac020000
[ 562.029622] RTW: ===> rtw_ips_pwr_down...................
IE: IEEE 802.11i/WPA2[ 562.037801] RTW: ====> rtw_ips_dev_unload...
Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
[ 562.053121] RTW: SetHwReg: bMacPwrCtrlOn=0
Authentication Suites (1) [ 562.060051] RTW: SetHwReg8188F: hci_sus_state=3
: PSK
Quali[ 562.067627] RTW: SetHwReg8188F: hci_sus_state=0
ty=36/100 Signal level=46/100 [ 562.074672] RTW: <=== rtw_ips_pwr_down..................... in 45ms
Extra:fm=0003
Cell 05 - Address: 78:44:FD:84:B6:D4
ESSID:"ZYTZ1"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:300 Mb/s
Extra:wpa_ie=dd160050f20101000050f20401000050f20401000050f202
IE: WPA Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Extra:
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=0/100 Signal level=20/100
Extra:fm=0001
Cell 07 - Address: 04:4F:4C:2C:6B:CC
ESSID:"WENETHONOR"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:72 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=20/100 Signal level=14/100
Extra:fm=0001
Cell 08 - Address: AA:8A:20:49:07:95
ESSID:""
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:144 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=0/100 Signal level=46/100
Extra:fm=0001
Cell 09 - Address: 8A:8A:20:49:07:95
ESSID:"BikiniBottom"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:144 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=48/100 Signal level=49/100
Extra:fm=0003
Cell 10 - Address: D8:5D:E2:3D:6B:0E
ESSID:"HP-Print-0e-LaserJet Pro MFP"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:135 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=14/100 Signal level=16/100
Extra:fm=0003
Cell 11 - Address: 0C:4B:54:B5:F5:92
ESSID:"Autoai_printf_2.4G"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.442 GHz (Channel 7)
Encryption key:on
Bit Rates:300 Mb/s
Extra:wpa_ie=dd1a0050f20101000050f20202000050f2040050f20201000050f202
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Extra:
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Quality=0/100 Signal level=28/100
Extra:fm=0001
Cell 12 - Address: B0:AC:D2:A5:FF:18
ESSID:"ChinaNet-msq5"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.447 GHz (Channel 8)
Encryption key:on
Bit Rates:144 Mb/s
Extra:wpa_ie=dd1a0050f20101000050f20202000050f2020050f20401000050f202
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Extra:
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD310050F204104A000110104400010210470010BC329E001DD811B28601B0ACD2A5FF19103C0001011049000600372A000120
Quality=100/100 Signal level=24/100
Extra:fm=0001
Cell 13 - Address: 78:44:FD:84:B6:08
ESSID:"ZYTZ2"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:300 Mb/s
Extra:wpa_ie=dd160050f20101000050f20401000050f20401000050f202
IE: WPA Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Extra:
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=100/100 Signal level=22/100
Extra:fm=00033、其他的测试,后续补上
扫一扫
329
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
