利用Keepalived+mysql构建高可用MySQL双主自动切换

关于MySQL-HA,目前有多种解决方案,比如heartbeat、drbd、mmm、共享存储,但是它们各有优缺点。heartbeat、drbd配置较为复杂,需要自己写脚本才能实现MySQL自动切换,对于不会脚本语言的人来说,这无疑是一种脑裂问题;对于mmm,生产环境中很少有人用,且mmm管理端需要单独运行一台服务器上,要是想实现高可用,就得对mmm管理端做HA,这样无疑又增加了硬件开支;对于共享存储,个人觉得MySQL数据还是放在本地较为安全,存储设备毕竟存在单点隐患。

使用MySQL双master+keepalived是一种非常好的解决方案,在MySQL-HA环境 中,MySQL互为主从关系,这样就保证了两台MySQL数据的一致性,然后用keepalived实现虚拟IP,通过keepalived自带的服务监 控功能来实现MySQL故障时自动切换。

下面,我把即将上线的一个生产环境中的架构与大家分享一下,看一下这个架构中,MySQL-HA是如何实现的,环境拓扑如下:

MySQL-VIP:192.168.1.200  
MySQL-master1:192.168.1.201  
MySQL-master2:192.168.1.202  
 
OS版本:CentOS 5.4  
MySQL版本:5.0.89  
Keepalived版本:1.1.20 

一、MySQL master-master配置

1、修改MySQL配置文件

两台MySQL均如要开启binlog日志功能,开启方法:在MySQL配置文件[MySQLd]段中加上log-bin=MySQL-bin选项
两台MySQL的server-ID不能一样,默认情况下两台MySQL的serverID都是1,需将其中一台修改为2即可

Master1配置:

#vim /etc/my.cnf

log-bin=mysql-bin   //开启binlog日志功能
log =/usr/local/mysql/var/mysql.log    //会打印mysql的所以sql语句

server-id= 1  //

binlog-do-db = test    //需要同步的库名称
auto-increment-increment= 2
auto-increment-offset= 2<span style="font-family:Simsun;"><span style="white-space:normal;"> </span></span>

Master2配置:

#vim /etc/my.cnf

log-bin=mysql-bin    //开启binlog日志功能
log =/usr/local/mysql/var/mysql.log  //会打印mysql的所以sql语句

server-id= 2

binlog-do-db = test   //需要同步的库名称
auto-increment-increment= 2
auto-increment-offset= 2

2、将192.168.1.201设为192.168.1.202的主服务器

在192.168.1.201上新建授权用户

MySQL> grant replication slave on *.* to 'replication'@'%' identified by 'replication';  
Query OK, 0 rows affected (0.00 sec)  
 
MySQL> show master status;  
+------------------+----------+--------------+------------------+  
| File             | Position | Binlog_Do_DB | Binlog_Ignore_DB |  
+------------------+----------+--------------+------------------+  
| MySQL-bin.000003 |      374 |              |                  |   
+------------------+----------+--------------+------------------+  
1 row in set (0.00 sec) 

在192.168.1.202上将192.168.1.201设为自己的主服务器

MySQL> change master to master_host='192.168.1.201',master_user='replication',master_password='replication',master_log_file='MySQL-bin.000003',master_log_pos=374;  
Query OK, 0 rows affected (0.05 sec)  
 
MySQL> start slave;  
Query OK, 0 rows affected (0.00 sec)  
 
MySQL> show slave status\G  
*************************** 1. row ***************************  
             Slave_IO_State: Waiting for master to send event  
                Master_Host: 192.168.1.201  
                Master_User: replication  
                Master_Port: 3306  
              Connect_Retry: 60  
            Master_Log_File: MySQL-bin.000003  
        Read_Master_Log_Pos: 374  
             Relay_Log_File: MySQL-master2-relay-bin.000002  
              Relay_Log_Pos: 235  
      Relay_Master_Log_File: MySQL-bin.000003  
           Slave_IO_Running: Yes  
          Slave_SQL_Running: Yes  
            Replicate_Do_DB:   
        Replicate_Ignore_DB:   
         Replicate_Do_Table:   
     Replicate_Ignore_Table:   
    Replicate_Wild_Do_Table:   
Replicate_Wild_Ignore_Table:   
                 Last_Errno: 0  
                 Last_Error:   
               Skip_Counter: 0  
        Exec_Master_Log_Pos: 374  
            Relay_Log_Space: 235  
            Until_Condition: None  
             Until_Log_File:   
              Until_Log_Pos: 0  
         Master_SSL_Allowed: No  
         Master_SSL_CA_File:   
         Master_SSL_CA_Path:   
            Master_SSL_Cert:   
          Master_SSL_Cipher:   
             Master_SSL_Key:   
      Seconds_Behind_Master: 0  
1 row in set (0.00 sec) 

3、将192.168.1.202设为192.168.1.201的主服务器

在192.168.1.202上新建授权用户

MySQL> grant replication slave on *.* to 'replication'@'%' identified by 'replication';  
Query OK, 0 rows affected (0.00 sec)  
 
MySQL> show master status;  
+------------------+----------+--------------+------------------+  
| File             | Position | Binlog_Do_DB | Binlog_Ignore_DB |  
+------------------+----------+--------------+------------------+  
| MySQL-bin.000003 |      374 |              |                  |   
+------------------+----------+--------------+------------------+  
1 row in set (0.00 sec) 

在192.168.1.201上,将192.168.1.202设为自己的主服务器

MySQL> change master to master_host='192.168.1.202',master_user='replication',master_password='replication',master_log_file='MySQL-bin.000003',master_log_pos=374;  
Query OK, 0 rows affected (0.05 sec)  
 
MySQL> start slave;  
Query OK, 0 rows affected (0.00 sec)  
 
MySQL> show slave status\G  
*************************** 1. row ***************************  
             Slave_IO_State: Waiting for master to send event  
                Master_Host: 192.168.1.202  
                Master_User: replication  
                Master_Port: 3306  
              Connect_Retry: 60  
            Master_Log_File: MySQL-bin.000003  
        Read_Master_Log_Pos: 374  
             Relay_Log_File: MySQL-master1-relay-bin.000002  
              Relay_Log_Pos: 235  
      Relay_Master_Log_File: MySQL-bin.000003  
           Slave_IO_Running: Yes  
          Slave_SQL_Running: Yes  
            Replicate_Do_DB:   
        Replicate_Ignore_DB:   
         Replicate_Do_Table:   
     Replicate_Ignore_Table:   
    Replicate_Wild_Do_Table:   
Replicate_Wild_Ignore_Table:   
                 Last_Errno: 0  
                 Last_Error:   
               Skip_Counter: 0  
        Exec_Master_Log_Pos: 374  
            Relay_Log_Space: 235  
            Until_Condition: None  
             Until_Log_File:   
              Until_Log_Pos: 0  
         Master_SSL_Allowed: No 
         Master_SSL_CA_File:   
         Master_SSL_CA_Path:   
            Master_SSL_Cert:   
          Master_SSL_Cipher:   
             Master_SSL_Key:   
      Seconds_Behind_Master: 0  
1 row in set (0.00 sec) 

4、MySQL同步测试

如上述均正确配置,现在任何一台MySQL上更新数据都会同步到另一台MySQL,MySQL同步在此不再演示

二、keepalived安装及配置

1、192.168.1.201服务器上keepalived安装及配置
安装keepalived

#wget http://www.keepalived.org/software/keepalived-1.2.2.tar.gz
#tar xvzf keepalived-1.2.2.tar.gz
#cd keepalived-1.2.2
#./configure  
#make && make install
#cp /usr/local/etc/rc.d/init.d/keepalived /etc/init.d/
cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/
chmod +x /etc/init.d/keepalived
chkconfig --add keepalived
chkconfig keepalived on
mkdir /etc/keepalived
ln -s /usr/local/sbin/keepalived /usr/sbin/

配置keepalived
我们自己在新建一个配置文件,默认情况下keepalived启动时会去/etc/keepalived目录下找配置文件

#vi /etc/keepalived/keepalived.conf  
global_defs {  
     notification_email {  
         haohailuo@163.com
     }  
     notification_email_from haohailuo@163.com  
     smtp_server 127.0.0.1  
     smtp_connect_timeout 30  
     router_id MySQL-ha  
}  
 
vrrp_instance VI_1 {  
     state BACKUP   #两台配置此处均是BACKUP  
     interface eth0  
     virtual_router_id 51  
     priority 100   #优先级,另一台改为90  
     advert_int 1  
     nopreempt  #不抢占,只在优先级高的机器上设置即可,优先级低的机器不设置  
     authentication {  
         auth_type PASS  
         auth_pass 1111  
     }  
     virtual_ipaddress {  
         192.168.1.200  
     }  
}  
 
virtual_server 192.168.1.200 3306 {  
     delay_loop 2   #每个2秒检查一次real_server状态  
     lb_algo wrr   #LVS算法  
     lb_kind DR    #LVS模式  
     persistence_timeout 60   #会话保持时间  
     protocol TCP  
     real_server 192.168.1.201 3306 {  
         weight 3  
         notify_down /usr/local/MySQL/bin/MySQL.sh  #检测到服务down后执行的脚本  
         TCP_CHECK {  
             connect_timeout 10    #连接超时时间  
             nb_get_retry 3       #重连次数  
             delay_before_retry 3   #重连间隔时间  
             connect_port 3306   #健康检查端口
         }
     }  
} 

编写检测服务down后所要执行的脚本

#vi /usr/local/MySQL/bin/MySQL.sh  
#!/bin/sh  
pkill keepalived  
#chmod +x /usr/local/MySQL/bin/MySQL.sh 

注:此脚本是上面配置文件notify_down选项所用到的,keepalived使用notify_down选项来检查real_server 的服务状态,当发现real_server服务故障时,便触发此脚本;我们可以看到,脚本就一个命令,通过pkill keepalived强制杀死keepalived进程,从而实现了MySQL故障自动转移。另外,我们不用担心两个MySQL会同时提供数据更新操作, 因为每台MySQL上的keepalived的配置里面只有本机MySQL的IP+VIP,而不是两台MySQL的IP+VIP

启动keepalived

#/usr/local/keepalived/sbin/keepalived –D  
#ps -aux | grep keepalived 

测试
找一台局域网PC,然后去ping  MySQL的VIP,这时候MySQL的VIP是可以ping的通的
停止MySQL服务,看keepalived健康检查程序是否会触发我们编写的脚本

2、192.168.1.202上keepalived安装及配置
安装keepalived,安装方法参照192.168.1.201的安装方法
配置keepalived
这台配置和上面基本一样,但有三个地方不同:优先级为90、无抢占设置、real_server为本机IP

#vi /etc/keepalived/keepalived.conf
global_defs {  
     notification_email {  
         haohailuo@163.com  
     }  
     notification_email_from haohailuo@163.com  
     smtp_server 127.0.0.1  
     smtp_connect_timeout 30  
     router_id MySQL-ha  
}  
 
vrrp_instance VI_1 {  
     state BACKUP  
     interface eth0  
     virtual_router_id 51  
     priority 90  
     advert_int 1  
     authentication {  
         auth_type PASS  
         auth_pass 1111  
     }  
     virtual_ipaddress {  
         192.168.1.200  
     }  
}  
 
virtual_server 192.168.1.200 3306 {  
     delay_loop 2  
     lb_algo wrr  
     lb_kind DR  
     persistence_timeout 60  
     protocol TCP  
     real_server 192.168.1.202 3306 {  
         weight 3  
         notify_down /usr/local/MySQL/bin/MySQL.sh  
         TCP_CHECK {  
             connect_timeout 10  
             nb_get_retry 3  
             delay_before_retry 3  
             connect_port 3306  
         }
     }
}

编写检测服务down后所要执行的脚本

#vi /usr/local/MySQL/bin/MySQL.sh  
#!/bin/sh  
pkill keepalived  
#chmod +x /usr/local/MySQL/bin/MySQL.sh 

启动keepalived

#/usr/local/keepalived/sbin/keepalived –D  
#ps -aux | grep keepalived

测试

停止MySQL服务,看keepalived健康检查程序是否会触发我们编写的脚本

三、测试

MySQL远程登录测试

我们找一台安装有MySQL客户端的windows,然后登录VIP,看是否能登录,在登录之两台MySQL服务器都要授权允许从远程登录

MySQL> grant all privileges on *.* to 'root'@'%' identified by '123456';  
Query OK, 0 rows affected (0.00 sec)  
 
MySQL> flush privileges;  
Query OK, 0 rows affected (0.00 sec) 

使用客户端登录VIP测试

C:\MySQL\bin>MySQL.exe -uroot -p123456 -h192.168.1.200 -P3306  
Welcome to the MySQL monitor.  Commands end with ; or \g.  
Your MySQL connection id is 224  
Server version: 5.0.89-log Source distribution  
 
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.  
 
MySQL> 

keepalived故障转移测试

※在windows客户端一直去ping  VIP,然后关闭192.168.1.201上的keepalived,正常情况下VIP就会切换到192.168.1.202上面去
※开启192.168.1.201上的keepalived,关闭192.168.1.202上的keepalived,看是否能自动切换,正常情况下VIP又会属于192.168.1.201
注:keepalived切换速度还是非常块的,整个切换过程只需1-3秒

● MySQL故障转移测试
※在192.168.1.201上关闭MySQL服务,看VIP是否会切换到192.168.1.202上
※开启192.168.1.201上的MySQL和keepalived,然后关闭192.168.1.202上的MySQL,看VIP是否会切换到192.168.1.201上

下面是用windows客户端连接的MySQL的VIP,在切换时我执行了一个MySQL查询命令,从执行show databases到显示出结果时间为3-5秒(大家可以看到上面有个错误提示,不过不用担心,因为我们的keepalived切换大概为3秒左右,这3 秒左右VIP是谁都不属于的)

MySQL> show databases;  
ERROR 2006 (HY000): MySQL server has gone away  
No connection. Trying to reconnect...  
Connection id:    592  
Current database: *** NONE ***  
 
+--------------------+  
| Database           |  
+--------------------+  
| information_schema |  
| MySQL              |  
| test               |  
+--------------------+  
3 rows in set (9.01 sec) 

世间万事万物,都不具备绝对的完美,就像上面的MySQL-HA一样,keepalived只能做到对3306的健康检查,但是做不到比如像 MySQL复制中的slave-SQL、slave-IO进程的检查。所以要想做到一些细致的健康检查,还得需要借助额外的监控工具,比如nagios, 然后用nagios实现短信、邮件报警,从而能够有效地解决问题。

评论 1
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值