数据接收
客户端写往数据节点的数据由org.apache.hadoop.hdfs.server.datanode.BlockReceiver.java中的receiveBlock方法接收
void receiveBlock(
DataOutputStream mirrOut, // output to next datanode
DataInputStream mirrIn, // input from next datanode
DataOutputStream replyOut, // output to previous datanode
String mirrAddr, DataTransferThrottler throttlerArg,
int numTargets) throws IOException {
mirrorOut = mirrOut;
mirrorAddr = mirrAddr;
throttler = throttlerArg;
try {
// write data chunk header
if (!finalized) {
BlockMetadataHeader.writeHeader(checksumOut, checksum);
}
if (clientName.length() > 0) {
responder = new Daemon(datanode.threadGroup,
new PacketResponder(this, block, mirrIn,
replyOut, numTargets,
Thread.currentThread()));
responder.start(); // start thread to processes reponses
}
/*
* Receive until packet length is zero.
*/
while (receivePacket() > 0) {}
// flush the mirror out
if (mirrorOut != null) {
try {
mirrorOut.writeInt(0); // mark the end of the block
mirrorOut.flush();
} catch (IOException e) {
handleMirrorOutError(e);
}
}
// wait for all outstanding packet responses. And then
// indicate responder to gracefully shutdown.
if (responder != null) {
((PacketResponder)responder.getRunnable()).close();
}
// if this write is for a replication request (and not
// from a client), then finalize block. For client-writes,
// the block is finalized in the PacketResponder.
if (clientName.length() == 0) {
// close the block/crc files
close();
// Finalize the block. Does this fsync()?
block.setNumBytes(offsetInBlock);
datanode.data.finalizeBlock(block);
datanode.myMetrics.incrBlocksWritten();
}
} catch (IOException ioe) {
LOG.info("Exception in receiveBlock for " + block + " " + ioe);
IOUtils.closeStream(this);
if (responder != null) {
responder.interrupt();
}
cleanupBlock();
throw ioe;
} finally {
if (responder != null) {
try {
responder.join();
} catch (InterruptedException e) {
throw new IOException("Interrupted receiveBlock");
}
responder = null;
}
}
}receiveBlock()将大部分处理工作交给receivePacket()。BlockReceiver.receiveBlock()循环调用receivePacket()，处理这次写请求的所有数据包。当所有的数据接收完毕后，它进行下述清理工作：发送一个空的数据包到下游节点，通知后面的数据节点这次写操作结束；等待PacketResponder线程结束，线程结束，表明所有的响应已经发送给上游节点，同时，本节点的处理结果也已经通知名字节点；关闭文件，并更新数据块文件的长度，然后，通过FSDataset.finalizeBlock()提交数据块。至此，写数据请求处理完毕
receivePacket()代码如下：
/**
* Receives and processes a packet. It can contain many chunks.
* returns size of the packet.
*/
private int receivePacket() throws IOException {
int payloadLen = readNextPacket();
if (payloadLen <= 0) {
return payloadLen;
}
buf.mark();
//read the header
buf.getInt(); // packet length
offsetInBlock = buf.getLong(); // get offset of packet in block
long seqno = buf.getLong(); // get seqno
boolean lastPacketInBlock = (buf.get() != 0);
int endOfHeader = buf.position();
buf.reset();
if (LOG.isDebugEnabled()){
LOG.debug("Receiving one packet for " + block +
" of length " + payloadLen +
" seqno " + seqno +
" offsetInBlock " + offsetInBlock +
" lastPacketInBlock " + lastPacketInBlock);
}
setBlockPosition(offsetInBlock);
// First write the packet to the mirror:
if (mirrorOut != null && !mirrorError) {
try {
mirrorOut.write(buf.array(), buf.position(), buf.remaining());
mirrorOut.flush();
} catch (IOException e) {
handleMirrorOutError(e);
}
}
buf.position(endOfHeader);
int len = buf.getInt();
if (len < 0) {
throw new IOException("Got wrong length during writeBlock(" + block +
") from " + inAddr + " at offset " +
offsetInBlock + ": " + len);
}
if (len == 0) {
LOG.debug("Receiving empty packet for " + block);
} else {
offsetInBlock += len;
int checksumLen = ((len + bytesPerChecksum - 1)/bytesPerChecksum)*
checksumSize;
if ( buf.remaining() != (checksumLen + len)) {
throw new IOException("Data remaining in packet does not match " +
"sum of checksumLen and dataLen");
}
int checksumOff = buf.position();
int dataOff = checksumOff + checksumLen;
byte pktBuf[] = buf.array();
buf.position(buf.limit()); // move to the end of the data.
/* skip verifying checksum iff this is not the last one in the
* pipeline and clientName is non-null. i.e. Checksum is verified
* on all the datanodes when the data is being written by a
* datanode rather than a client. Whe client is writing the data,
* protocol includes acks and only the last datanode needs to verify
* checksum.
*/
if (mirrorOut == null || clientName.length() == 0) {
verifyChunks(pktBuf, dataOff, len, pktBuf, checksumOff);
}
try {
if (!finalized) {
//finally write to the disk :
out.write(pktBuf, dataOff, len);
// If this is a partial chunk, then verify that this is the only
// chunk in the packet. Calculate new crc for this chunk.
if (partialCrc != null) {
if (len > bytesPerChecksum) {
throw new IOException("Got wrong length during writeBlock(" +
block + ") from " + inAddr + " " +
"A packet can have only one partial chunk."+
" len = " + len +
" bytesPerChecksum " + bytesPerChecksum);
}
partialCrc.update(pktBuf, dataOff, len);
byte[] buf = FSOutputSummer.convertToByteStream(partialCrc, checksumSize);
checksumOut.write(buf);
LOG.debug("Writing out partial crc for data len " + len);
partialCrc = null;
} else {
checksumOut.write(pktBuf, checksumOff, checksumLen);
}
datanode.myMetrics.incrBytesWritten(len);
/// flush entire packet before sending ack
flush();
// update length only after flush to disk
datanode.data.setVisibleLength(block, offsetInBlock);
dropOsCacheBehindWriter(offsetInBlock);
}
} catch (IOException iex) {
datanode.checkDiskError(iex);
throw iex;
}
}
// put in queue for pending acks
if (responder != null) {
((PacketResponder)responder.getRunnable()).enqueue(seqno,
lastPacketInBlock);
}
if (throttler != null) { // throttle I/O
throttler.throttle(payloadLen);
}
return payloadLen;
}receivePacket（）方法一开始就调用readNextPacket()，通过该方法最少读入一个写请求数据包。读入的数据放在类型为ByteBuffer的缓冲区buf中。ByteBuffer是java.nio.Buffer的子类
readNextPacket()的实现比较琐碎，需要保证缓冲区剩余空间可以读入整个数据包，必须考虑数据包的长度（必要时需要重新分配缓冲区）、并根据需要调整数据在缓冲区中的位置。总而言之，readNextPacket（）一次读入一个完整的数据包。
BlockReceiver.receivePacket()从缓冲区读入数据包的包头信息，并赋值到对象的成员变量，接下来的准备动作是：调用setBlockPosition()方法，设置写数据时的文件位置。代码如下
buf.mark();
//read the header
buf.getInt(); // packet length
offsetInBlock = buf.getLong(); // get offset of packet in block
long seqno = buf.getLong(); // get seqno
boolean lastPacketInBlock = (buf.get() != 0);
int endOfHeader = buf.position();
buf.reset();
if (LOG.isDebugEnabled()){
LOG.debug("Receiving one packet for " + block +
" of length " + payloadLen +
" seqno " + seqno +
" offsetInBlock " + offsetInBlock +
" lastPacketInBlock " + lastPacketInBlock);
}
setBlockPosition(offsetInBlock);我们知道，写数据的时候其实需要同时写两个文件，数据块文件和它的校验信息文件，BlockReceiver.setBlockPositiion()会设置这两个文件的写位置，为后续持久化数据做准备。设置数据块文件的写位置比较简单，但校验信息文件的就相对复杂了，这又是一个和分块校验相关的调整。校验信息的计算需要数据以块的形式组织，但用户以流的形式写数据，如果写（追加）数据的开始点落在某个校验块的中间，需要在确定校验信息文件写位置的时候，计算不完整数据校验块（图中的校验块n）的校验信息，为后续写校验数据做准备。
setBlockPosition()方法只有一个参数offsetInBlock，即数据块文件的写位置，如果该位置不处于校验块的边界，就会调用computePartialChunkCrc()计算上述校验信息。该方法需要三个参数，进入方法时，前面两个参数blkoff,ckoff的值如上图，第三个参数bytesPerChecksum是校验块的大小。根据这些参数，首先可以计算出不完整数据块的长度sizePartialChunk，然后，分配缓冲区读入数据，计算这些数据的校验和。校验和的结果保存在BlockReceiver的成员变量partialCrc中，后面会和新写入的数据一起，计算出新的校验和的值，并保持在校验信息文件的当前位置。注意，对于数据块文件，新写入的数据会追加在数据块文件的文件尾，但校验信息文件，如果对应的是一个不完整数据校验块，那么，文件的最后部分（从ckoff开始的地方）会被更新，而不能简单地直接进行追加。代码如下：
/**
* Sets the file pointer in the local block file to the specified value.
*/
private void setBlockPosition(long offsetInBlock) throws IOException {
if (finalized) {
if (!isRecovery) {
throw new IOException("Write to offset " + offsetInBlock +
" of block " + block +
" that is already finalized.");
}
if (offsetInBlock > datanode.data.getLength(block)) {
throw new IOException("Write to offset " + offsetInBlock +
" of block " + block +
" that is already finalized and is of size " +
datanode.data.getLength(block));
}
return;
}
if (datanode.data.getChannelPosition(block, streams) == offsetInBlock) {
return; // nothing to do
}
long offsetInChecksum = BlockMetadataHeader.getHeaderSize() +
offsetInBlock / bytesPerChecksum * checksumSize;
if (out != null) {
out.flush();
}
if (checksumOut != null) {
checksumOut.flush();
}
// If this is a partial chunk, then read in pre-existing checksum
if (offsetInBlock % bytesPerChecksum != 0) {
LOG.info("setBlockPosition trying to set position to " +
offsetInBlock + " for " + block +
" which is not a multiple of bytesPerChecksum " +
bytesPerChecksum);
computePartialChunkCrc(offsetInBlock, offsetInChecksum, bytesPerChecksum);
}
if (LOG.isDebugEnabled()) {
LOG.debug("Changing block file offset of block " + block + " from " +
datanode.data.getChannelPosition(block, streams) +
" to " + offsetInBlock +
" meta file offset to " + offsetInChecksum);
}
// set the position of the block file
datanode.data.setChannelPosition(block, streams, offsetInBlock, offsetInChecksum);
}
/**
* reads in the partial crc chunk and computes checksum
* of pre-existing data in partial chunk.
*/
private void computePartialChunkCrc(long blkoff, long ckoff,
int bytesPerChecksum) throws IOException {
// find offset of the beginning of partial chunk.
//
int sizePartialChunk = (int) (blkoff % bytesPerChecksum);
int checksumSize = checksum.getChecksumSize();
blkoff = blkoff - sizePartialChunk;
LOG.info("computePartialChunkCrc sizePartialChunk " +
sizePartialChunk + " " + block +
" offset in block " + blkoff +
" offset in metafile " + ckoff);
// create an input stream from the block file
// and read in partial crc chunk into temporary buffer
//
byte[] buf = new byte[sizePartialChunk];
byte[] crcbuf = new byte[checksumSize];
FSDataset.BlockInputStreams instr = null;
try {
instr = datanode.data.getTmpInputStreams(block, blkoff, ckoff);
IOUtils.readFully(instr.dataIn, buf, 0, sizePartialChunk);
// open meta file and read in crc value computer earlier
IOUtils.readFully(instr.checksumIn, crcbuf, 0, crcbuf.length);
} finally {
IOUtils.closeStream(instr);
}
// compute crc of partial chunk from data read in the block file.
partialCrc = new PureJavaCrc32();
partialCrc.update(buf, 0, sizePartialChunk);
LOG.info("Read in partial CRC chunk from disk for " + block);
// paranoia! verify that the pre-computed crc matches what we
// recalculated just now
if (partialCrc.getValue() != FSInputChecker.checksum2long(crcbuf)) {
String msg = "Partial CRC " + partialCrc.getValue() +
" does not match value computed the " +
" last time file was closed " +
FSInputChecker.checksum2long(crcbuf);
throw new IOException(msg);
}
//LOG.debug("Partial CRC matches 0x" +
// Long.toHexString(partialCrc.getValue()));
}上述准备工作完成后，receivePacket()把请求的数据包发送到下游的数据节点，通过这种方式，写数据的数据包就会流经数据流管道上的所有数据节点。代码如下
if (mirrorOut != null && !mirrorError) {
try {
mirrorOut.write(buf.array(), buf.position(), buf.remaining());
mirrorOut.flush();
} catch (IOException e) {
handleMirrorOutError(e);
}
}接下来要提及的是数据长度为0的数据包，这是一种特殊的数据包，当客户端长时间没有输出数据时，就会发送这样的心跳包，用于维护客户端和数据流管道上的各个数据节点的TCP连接。，如果数据包的长度不是0，就要将请求包中的数据和校验和写入文件。代码如下：
if (len == 0) {
LOG.debug("Receiving empty packet for " + block);
} else {
offsetInBlock += len;
int checksumLen = ((len + bytesPerChecksum - 1)/bytesPerChecksum)*
checksumSize;
if ( buf.remaining() != (checksumLen + len)) {
throw new IOException("Data remaining in packet does not match " +
"sum of checksumLen and dataLen");
}
int checksumOff = buf.position();
int dataOff = checksumOff + checksumLen;
byte pktBuf[] = buf.array();
buf.position(buf.limit()); // move to the end of the data.
/* skip verifying checksum iff this is not the last one in the
* pipeline and clientName is non-null. i.e. Checksum is verified
* on all the datanodes when the data is being written by a
* datanode rather than a client. Whe client is writing the data,
* protocol includes acks and only the last datanode needs to verify
* checksum.
*/
if (mirrorOut == null || clientName.length() == 0) {
verifyChunks(pktBuf, dataOff, len, pktBuf, checksumOff);
}
try {
if (!finalized) {
//finally write to the disk :
out.write(pktBuf, dataOff, len);
// If this is a partial chunk, then verify that this is the only
// chunk in the packet. Calculate new crc for this chunk.
if (partialCrc != null) {
if (len > bytesPerChecksum) {
throw new IOException("Got wrong length during writeBlock(" +
block + ") from " + inAddr + " " +
"A packet can have only one partial chunk."+
" len = " + len +
" bytesPerChecksum " + bytesPerChecksum);
}
partialCrc.update(pktBuf, dataOff, len);
byte[] buf = FSOutputSummer.convertToByteStream(partialCrc, checksumSize);
checksumOut.write(buf);
LOG.debug("Writing out partial crc for data len " + len);
partialCrc = null;
} else {
checksumOut.write(pktBuf, checksumOff, checksumLen);
}
datanode.myMetrics.incrBytesWritten(len);
/// flush entire packet before sending ack
flush();
// update length only after flush to disk
datanode.data.setVisibleLength(block, offsetInBlock);
dropOsCacheBehindWriter(offsetInBlock);
}
} catch (IOException iex) {
datanode.checkDiskError(iex);
throw iex;
}
}
// put in queue for pending acks
if (responder != null) {
((PacketResponder)responder.getRunnable()).enqueue(seqno,
lastPacketInBlock);
}
if (throttler != null) { // throttle I/O
throttler.throttle(payloadLen);
}
return payloadLen;主要关注点包括：客户端写数据的时候，只有最后一个数据节点需要通过verifyChunks（）方法对数据进行校验，数据流管道中的其他节点不需要执行这项检查。校验发现数据有问题，会上报名字节点，并抛出异常通知调用者BlockReceiver.receivePacket()；数据包如果成功接收并顺利写入磁盘后，则需要将处理的结果，通过PacketResponder.enqueue()方法，发送给PacketResponder线程，并由该线程继续后面的处理。
105
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
