今天接着之前进行了全局最小CU分块,来看进行CU分块的xCompressCU函数。
xCompressCU主要作用是完成块划分,确定最优预测模式。主要可以分为:
1.帧间预测xCheckRDCostInter、xCheckRDCostMerge2Nx2N
2.帧内预测xCheckRDCostIntra
3.PCM模式xCheckIntraPCM
这里PCM模式是一种无损编码模式,该模式下编码器不进行预测和变换操作,直接传输CU的像素值,因此其失真为0,HM中默认是关闭的。看函数名称貌似也算是帧内预测模式,在万、杨的《新一代高效视频编码H.265/HEVC:原理、标准与实现》书中没有将PCM归为帧内预测模式,将其作为一种特殊编码模式,单独进行了介绍。
xCompressCU通过自调用尝试各种划分情况和预测模式,并通过率失真优化选出最优模式。最后将划分后小块的率失真代价之和与未划分的大块比较,决定是否进行划分。
我主要看的是帧间部分,帧内和QP只是粗略的看了下。下面来看xCompressCU中帧间模式的划分。
其中除skip模式中更新Merge模式代价使用xCheckRDCostMerge2Nx2N,其他的每个模式都会调用xCheckRDCostInter来计算代价并比较确定最优模式。
// ====================================================================================================================
// Protected member functions
// ====================================================================================================================
/** Compress a CU block recursively with enabling sub-CTU-level delta QP
* - for loop of QP value to compress the current CU with all possible QP
*/
//迭代压缩CU块,初始输入为最大尺寸CU,直到达到最大深度结束
#if AMP_ENC_SPEEDUP
Void TEncCu::xCompressCU( TComDataCU*& rpcBestCU, TComDataCU*& rpcTempCU, const UInt uiDepth DEBUG_STRING_FN_DECLARE(sDebug_), PartSize eParentPartSize )
#else
Void TEncCu::xCompressCU( TComDataCU*& rpcBestCU, TComDataCU*& rpcTempCU, const UInt uiDepth )
#endif
{
TComPic* pcPic = rpcBestCU->getPic();
DEBUG_STRING_NEW(sDebug)
const TComPPS &pps=*(rpcTempCU->getSlice()->getPPS());
const TComSPS &sps=*(rpcTempCU->getSlice()->getSPS());
// These are only used if getFastDeltaQp() is true
const UInt fastDeltaQPCuMaxSize = Clip3(sps.getMaxCUHeight()>>sps.getLog2DiffMaxMinCodingBlockSize(), sps.getMaxCUHeight(), 32u);
// get Original YUV data from picture 获取原始YUV数据
m_ppcOrigYuv[uiDepth]->copyFromPicYuv( pcPic->getPicYuvOrg(), rpcBestCU->getCtuRsAddr(), rpcBestCU->getZorderIdxInCtu() );
// variable for Cbf fast mode PU decision
Bool doNotBlockPu = true;
Bool earlyDetectionSkipMode = false;
//获取当前最优CU的范围
const UInt uiLPelX = rpcBestCU->getCUPelX();
const UInt uiRPelX = uiLPelX + rpcBestCU->getWidth(0) - 1;
const UInt uiTPelY = rpcBestCU->getCUPelY();
const UInt uiBPelY = uiTPelY + rpcBestCU->getHeight(0) - 1;
const UInt uiWidth = rpcBestCU->getWidth(0);
Int iBaseQP = xComputeQP( rpcBestCU, uiDepth ); //计算QP
Int iMinQP;
Int iMaxQP;
Bool isAddLowestQP = false;
const UInt numberValidComponents = rpcBestCU->getPic()->getNumberValidComponents();
/*******************************************************分配QP*********************************************************/
//分配最大和最小QP
if( uiDepth <= pps.getMaxCuDQPDepth() )
{
Int idQP = m_pcEncCfg->getMaxDeltaQP();
iMinQP = Clip3( -sps.getQpBDOffset(CHANNEL_TYPE_LUMA), MAX_QP, iBaseQP-idQP );
iMaxQP = Clip3( -sps.getQpBDOffset(CHANNEL_TYPE_LUMA), MAX_QP, iBaseQP+idQP );
}
else
{
iMinQP = rpcTempCU->getQP(0);
iMaxQP = rpcTempCU->getQP(0);
}
if ( m_pcEncCfg->getUseRateCtrl() )
{
iMinQP = m_pcRateCtrl->getRCQP();
iMaxQP = m_pcRateCtrl->getRCQP();
}
// transquant-bypass (TQB) processing loop variable initialisation --- TQP处理初始化
const Int lowestQP = iMinQP; // For TQB, use this QP which is the lowest non TQB QP tested (rather than QP'=0) - that way delta QPs are smaller, and TQB can be tested at all CU levels.
if ( (pps.getTransquantBypassEnableFlag()) )
{
isAddLowestQP = true; // mark that the first iteration is to cost TQB mode.
iMinQP = iMinQP - 1; // increase loop variable range by 1, to allow testing of TQB mode along with other QPs
if ( m_pcEncCfg->getCUTransquantBypassFlagForceValue() )
{
iMaxQP = iMinQP;
}
}
TComSlice * pcSlice = rpcTempCU->getPic()->getSlice(rpcTempCU->getPic()->getCurrSliceIdx());
const Bool bBoundary = !( uiRPelX < sps.getPicWidthInLumaSamples() && uiBPelY < sps.getPicHeightInLumaSamples() );
if ( !bBoundary )
{
for (Int iQP=iMinQP; iQP<=iMaxQP; iQP++)
{
const Bool bIsLosslessMode = isAddLowestQP && (iQP == iMinQP);
if (bIsLosslessMode)
{
iQP = lowestQP;
}
m_cuChromaQpOffsetIdxPlus1 = 0;
if (pcSlice->getUseChromaQpAdj())
{
/* Pre-estimation of chroma QP based on input block activity may be performed
* here, using for example m_ppcOrigYuv[uiDepth] */
/* To exercise the current code, the index used for adjustment is based on
* block position
*/
Int lgMinCuSize = sps.getLog2MinCodingBlockSize() +
std::max<Int>(0, sps.getLog2DiffMaxMinCodingBlockSize()-Int(pps.getPpsRangeExtension().getDiffCuChromaQpOffsetDepth()));
m_cuChromaQpOffsetIdxPlus1 = ((uiLPelX >> lgMinCuSize) + (uiTPelY >> lgMinCuSize)) % (pps.getPpsRangeExtension().getChromaQpOffsetListLen() + 1);
}
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode ); //当前CU初始化
/*******************************************************帧间模式选择************************************************************************/
// do inter modes, SKIP and 2Nx2N
if( rpcBestCU->getSlice()->getSliceType() != I_SLICE ) //非I帧
{
// 2Nx2N
if(m_pcEncCfg->getUseEarlySkipDetection()) //使用earlyDetectionSkipMode
{
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_2Nx2N DEBUG_STRING_PASS_INTO(sDebug) ); //计算2Nx2N的代价并比较
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );//by Competition for inter_2Nx2N
}
// SKIP 更新为Merge模式的代价
xCheckRDCostMerge2Nx2N( rpcBestCU, rpcTempCU DEBUG_STRING_PASS_INTO(sDebug), &earlyDetectionSkipMode );//by Merge for inter_2Nx2N
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
if(!m_pcEncCfg->getUseEarlySkipDetection()) //不使用earlyDetectionSkipMode
{
// 2Nx2N, NxN
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_2Nx2N DEBUG_STRING_PASS_INTO(sDebug) ); //计算2Nx2N的代价并比较
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
if(m_pcEncCfg->getUseCbfFastMode()) //使用快速模式
{
doNotBlockPu = rpcBestCU->getQtRootCbf( 0 ) != 0;
}
}
}
if (bIsLosslessMode) // Restore loop variable if lossless mode was searched.
{
iQP = iMinQP;
}
}
if(!earlyDetectionSkipMode) //非earlyDetectionSkipMode
{
for (Int iQP=iMinQP; iQP<=iMaxQP; iQP++)
{
const Bool bIsLosslessMode = isAddLowestQP && (iQP == iMinQP); // If lossless, then iQP is irrelevant for subsequent modules.
if (bIsLosslessMode)
{
iQP = lowestQP;
}
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
//帧间模式选择NxN,2NxN,Nx2N
// do inter modes, NxN, 2NxN, and Nx2N
if( rpcBestCU->getSlice()->getSliceType() != I_SLICE ) //非I帧
{
// 2Nx2N, NxN
if(!( (rpcBestCU->getWidth(0)==8) && (rpcBestCU->getHeight(0)==8) )) //块尺寸不能为8x8
{
if( uiDepth == sps.getLog2DiffMaxMinCodingBlockSize() && doNotBlockPu)
{
//计算NxN模式代价并比较
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_NxN DEBUG_STRING_PASS_INTO(sDebug) );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
}
}
if(doNotBlockPu)
{
//计算Nx2N代价并比较
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_Nx2N DEBUG_STRING_PASS_INTO(sDebug) );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
if(m_pcEncCfg->getUseCbfFastMode() && rpcBestCU->getPartitionSize(0) == SIZE_Nx2N )
{
doNotBlockPu = rpcBestCU->getQtRootCbf( 0 ) != 0;
}
}
if(doNotBlockPu)
{
//计算2NxN代价并比较
xCheckRDCostInter ( rpcBestCU, rpcTempCU, SIZE_2NxN DEBUG_STRING_PASS_INTO(sDebug) );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
if(m_pcEncCfg->getUseCbfFastMode() && rpcBestCU->getPartitionSize(0) == SIZE_2NxN)
{
doNotBlockPu = rpcBestCU->getQtRootCbf( 0 ) != 0;
}
}
//尝试非对称尺寸
//! Try AMP (SIZE_2NxnU, SIZE_2NxnD, SIZE_nLx2N, SIZE_nRx2N)
if(sps.getUseAMP() && uiDepth < sps.getLog2DiffMaxMinCodingBlockSize() )
{
#if AMP_ENC_SPEEDUP
Bool bTestAMP_Hor = false, bTestAMP_Ver = false;
#if AMP_MRG
Bool bTestMergeAMP_Hor = false, bTestMergeAMP_Ver = false;
deriveTestModeAMP (rpcBestCU, eParentPartSize, bTestAMP_Hor, bTestAMP_Ver, bTestMergeAMP_Hor, bTestMergeAMP_Ver);
#else
deriveTestModeAMP (rpcBestCU, eParentPartSize, bTestAMP_Hor, bTestAMP_Ver);
#endif
//! Do horizontal AMP
if ( bTestAMP_Hor )
{
if(doNotBlockPu)
{
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_2NxnU DEBUG_STRING_PASS_INTO(sDebug) );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
if(m_pcEncCfg->getUseCbfFastMode() && rpcBestCU->getPartitionSize(0) == SIZE_2NxnU )
{
doNotBlockPu = rpcBestCU->getQtRootCbf( 0 ) != 0;
}
}
if(doNotBlockPu)
{
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_2NxnD DEBUG_STRING_PASS_INTO(sDebug) );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
if(m_pcEncCfg->getUseCbfFastMode() && rpcBestCU->getPartitionSize(0) == SIZE_2NxnD )
{
doNotBlockPu = rpcBestCU->getQtRootCbf( 0 ) != 0;
}
}
}
#if AMP_MRG
else if ( bTestMergeAMP_Hor )
{
if(doNotBlockPu)
{
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_2NxnU DEBUG_STRING_PASS_INTO(sDebug), true );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
if(m_pcEncCfg->getUseCbfFastMode() && rpcBestCU->getPartitionSize(0) == SIZE_2NxnU )
{
doNotBlockPu = rpcBestCU->getQtRootCbf( 0 ) != 0;
}
}
if(doNotBlockPu)
{
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_2NxnD DEBUG_STRING_PASS_INTO(sDebug), true );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
if(m_pcEncCfg->getUseCbfFastMode() && rpcBestCU->getPartitionSize(0) == SIZE_2NxnD )
{
doNotBlockPu = rpcBestCU->getQtRootCbf( 0 ) != 0;
}
}
}
#endif
//! Do horizontal AMP
if ( bTestAMP_Ver )
{
if(doNotBlockPu)
{
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_nLx2N DEBUG_STRING_PASS_INTO(sDebug) );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
if(m_pcEncCfg->getUseCbfFastMode() && rpcBestCU->getPartitionSize(0) == SIZE_nLx2N )
{
doNotBlockPu = rpcBestCU->getQtRootCbf( 0 ) != 0;
}
}
if(doNotBlockPu)
{
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_nRx2N DEBUG_STRING_PASS_INTO(sDebug) );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
}
}
#if AMP_MRG
else if ( bTestMergeAMP_Ver )
{
if(doNotBlockPu)
{
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_nLx2N DEBUG_STRING_PASS_INTO(sDebug), true );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
if(m_pcEncCfg->getUseCbfFastMode() && rpcBestCU->getPartitionSize(0) == SIZE_nLx2N )
{
doNotBlockPu = rpcBestCU->getQtRootCbf( 0 ) != 0;
}
}
if(doNotBlockPu)
{
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_nRx2N DEBUG_STRING_PASS_INTO(sDebug), true );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
}
}
#endif
#else
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_2NxnU );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_2NxnD );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
xCheckRDCostInter( rpcBestCU, rpcTempCU, SIZE_SIZE_nRx2NnLx2N );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
xCheckRDCostInter( rpcBestCU, rpcTempCU, );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
#endif
}
}
/***************************************************************帧内模式选择********************************************************/
// do normal intra modes
// speedup for inter frames
Double intraCost = 0.0;
if((rpcBestCU->getSlice()->getSliceType() == I_SLICE) ||
((!m_pcEncCfg->getDisableIntraPUsInInterSlices()) && (
(rpcBestCU->getCbf( 0, COMPONENT_Y ) != 0) ||
((rpcBestCU->getCbf( 0, COMPONENT_Cb ) != 0) && (numberValidComponents > COMPONENT_Cb)) ||
((rpcBestCU->getCbf( 0, COMPONENT_Cr ) != 0) && (numberValidComponents > COMPONENT_Cr)) // avoid very complex intra if it is unlikely
)))
{
xCheckRDCostIntra( rpcBestCU, rpcTempCU, intraCost, SIZE_2Nx2N DEBUG_STRING_PASS_INTO(sDebug) );
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
if( uiDepth == sps.getLog2DiffMaxMinCodingBlockSize() )
{
if( rpcTempCU->getWidth(0) > ( 1 << sps.getQuadtreeTULog2MinSize() ) )
{
Double tmpIntraCost;
xCheckRDCostIntra( rpcBestCU, rpcTempCU, tmpIntraCost, SIZE_NxN DEBUG_STRING_PASS_INTO(sDebug) );
intraCost = std::min(intraCost, tmpIntraCost);
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
}
}
}
// test PCM
if(sps.getUsePCM()
&& rpcTempCU->getWidth(0) <= (1<<sps.getPCMLog2MaxSize())
&& rpcTempCU->getWidth(0) >= (1<<sps.getPCMLog2MinSize()) )
{
UInt uiRawBits = getTotalBits(rpcBestCU->getWidth(0), rpcBestCU->getHeight(0), rpcBestCU->getPic()->getChromaFormat(), sps.getBitDepths().recon);
UInt uiBestBits = rpcBestCU->getTotalBits();
if((uiBestBits > uiRawBits) || (rpcBestCU->getTotalCost() > m_pcRdCost->calcRdCost(uiRawBits, 0)))
{
xCheckIntraPCM (rpcBestCU, rpcTempCU);
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
}
}
if (bIsLosslessMode) // Restore loop variable if lossless mode was searched.
{
iQP = iMinQP;
}
}
}
if( rpcBestCU->getTotalCost()!=MAX_DOUBLE )
{
m_pcRDGoOnSbacCoder->load(m_pppcRDSbacCoder[uiDepth][CI_NEXT_BEST]);
m_pcEntropyCoder->resetBits();
m_pcEntropyCoder->encodeSplitFlag( rpcBestCU, 0, uiDepth, true );
rpcBestCU->getTotalBits() += m_pcEntropyCoder->getNumberOfWrittenBits(); // split bits
rpcBestCU->getTotalBins() += ((TEncBinCABAC *)((TEncSbac*)m_pcEntropyCoder->m_pcEntropyCoderIf)->getEncBinIf())->getBinsCoded();
rpcBestCU->getTotalCost() = m_pcRdCost->calcRdCost( rpcBestCU->getTotalBits(), rpcBestCU->getTotalDistortion() );
m_pcRDGoOnSbacCoder->store(m_pppcRDSbacCoder[uiDepth][CI_NEXT_BEST]);
}
}
// copy original YUV samples to PCM buffer
if( rpcBestCU->getTotalCost()!=MAX_DOUBLE && rpcBestCU->isLosslessCoded(0) && (rpcBestCU->getIPCMFlag(0) == false))
{
xFillPCMBuffer(rpcBestCU, m_ppcOrigYuv[uiDepth]);
}
if( uiDepth == pps.getMaxCuDQPDepth() )
{
Int idQP = m_pcEncCfg->getMaxDeltaQP();
iMinQP = Clip3( -sps.getQpBDOffset(CHANNEL_TYPE_LUMA), MAX_QP, iBaseQP-idQP );
iMaxQP = Clip3( -sps.getQpBDOffset(CHANNEL_TYPE_LUMA), MAX_QP, iBaseQP+idQP );
}
else if( uiDepth < pps.getMaxCuDQPDepth() )
{
iMinQP = iBaseQP;
iMaxQP = iBaseQP;
}
else
{
const Int iStartQP = rpcTempCU->getQP(0);
iMinQP = iStartQP;
iMaxQP = iStartQP;
}
if ( m_pcEncCfg->getUseRateCtrl() )
{
iMinQP = m_pcRateCtrl->getRCQP();
iMaxQP = m_pcRateCtrl->getRCQP();
}
if ( m_pcEncCfg->getCUTransquantBypassFlagForceValue() )
{
iMaxQP = iMinQP; // If all TUs are forced into using transquant bypass, do not loop here.
}
const Bool bSubBranch = bBoundary || !( m_pcEncCfg->getUseEarlyCU() && rpcBestCU->getTotalCost()!=MAX_DOUBLE && rpcBestCU->isSkipped(0) );
if( bSubBranch && uiDepth < sps.getLog2DiffMaxMinCodingBlockSize() && (!getFastDeltaQp() || uiWidth > fastDeltaQPCuMaxSize || bBoundary))
{
// further split
for (Int iQP=iMinQP; iQP<=iMaxQP; iQP++)
{
const Bool bIsLosslessMode = false; // False at this level. Next level down may set it to true.
rpcTempCU->initEstData( uiDepth, iQP, bIsLosslessMode );
UChar uhNextDepth = uiDepth+1;
TComDataCU* pcSubBestPartCU = m_ppcBestCU[uhNextDepth];
TComDataCU* pcSubTempPartCU = m_ppcTempCU[uhNextDepth];
DEBUG_STRING_NEW(sTempDebug)
for ( UInt uiPartUnitIdx = 0; uiPartUnitIdx < 4; uiPartUnitIdx++ )
{
pcSubBestPartCU->initSubCU( rpcTempCU, uiPartUnitIdx, uhNextDepth, iQP ); // clear sub partition datas or init.
pcSubTempPartCU->initSubCU( rpcTempCU, uiPartUnitIdx, uhNextDepth, iQP ); // clear sub partition datas or init.
if( ( pcSubBestPartCU->getCUPelX() < sps.getPicWidthInLumaSamples() ) && ( pcSubBestPartCU->getCUPelY() < sps.getPicHeightInLumaSamples() ) )
{
if ( 0 == uiPartUnitIdx) //initialize RD with previous depth buffer
{
m_pppcRDSbacCoder[uhNextDepth][CI_CURR_BEST]->load(m_pppcRDSbacCoder[uiDepth][CI_CURR_BEST]);
}
else
{
m_pppcRDSbacCoder[uhNextDepth][CI_CURR_BEST]->load(m_pppcRDSbacCoder[uhNextDepth][CI_NEXT_BEST]);
}
#if AMP_ENC_SPEEDUP
DEBUG_STRING_NEW(sChild)
if ( !(rpcBestCU->getTotalCost()!=MAX_DOUBLE && rpcBestCU->isInter(0)) )
{
xCompressCU( pcSubBestPartCU, pcSubTempPartCU, uhNextDepth DEBUG_STRING_PASS_INTO(sChild), NUMBER_OF_PART_SIZES );
}
else
{
xCompressCU( pcSubBestPartCU, pcSubTempPartCU, uhNextDepth DEBUG_STRING_PASS_INTO(sChild), rpcBestCU->getPartitionSize(0) );
}
DEBUG_STRING_APPEND(sTempDebug, sChild)
#else
xCompressCU( pcSubBestPartCU, pcSubTempPartCU, uhNextDepth );
#endif
rpcTempCU->copyPartFrom( pcSubBestPartCU, uiPartUnitIdx, uhNextDepth ); // Keep best part data to current temporary data.
xCopyYuv2Tmp( pcSubBestPartCU->getTotalNumPart()*uiPartUnitIdx, uhNextDepth );
}
else
{
pcSubBestPartCU->copyToPic( uhNextDepth );
rpcTempCU->copyPartFrom( pcSubBestPartCU, uiPartUnitIdx, uhNextDepth );
}
}
m_pcRDGoOnSbacCoder->load(m_pppcRDSbacCoder[uhNextDepth][CI_NEXT_BEST]);
if( !bBoundary )
{
m_pcEntropyCoder->resetBits();
m_pcEntropyCoder->encodeSplitFlag( rpcTempCU, 0, uiDepth, true );
rpcTempCU->getTotalBits() += m_pcEntropyCoder->getNumberOfWrittenBits(); // split bits
rpcTempCU->getTotalBins() += ((TEncBinCABAC *)((TEncSbac*)m_pcEntropyCoder->m_pcEntropyCoderIf)->getEncBinIf())->getBinsCoded();
}
rpcTempCU->getTotalCost() = m_pcRdCost->calcRdCost( rpcTempCU->getTotalBits(), rpcTempCU->getTotalDistortion() );
if( uiDepth == pps.getMaxCuDQPDepth() && pps.getUseDQP())
{
Bool hasResidual = false;
for( UInt uiBlkIdx = 0; uiBlkIdx < rpcTempCU->getTotalNumPart(); uiBlkIdx ++)
{
if( ( rpcTempCU->getCbf(uiBlkIdx, COMPONENT_Y)
|| (rpcTempCU->getCbf(uiBlkIdx, COMPONENT_Cb) && (numberValidComponents > COMPONENT_Cb))
|| (rpcTempCU->getCbf(uiBlkIdx, COMPONENT_Cr) && (numberValidComponents > COMPONENT_Cr)) ) )
{
hasResidual = true;
break;
}
}
if ( hasResidual )
{
m_pcEntropyCoder->resetBits();
m_pcEntropyCoder->encodeQP( rpcTempCU, 0, false );
rpcTempCU->getTotalBits() += m_pcEntropyCoder->getNumberOfWrittenBits(); // dQP bits
rpcTempCU->getTotalBins() += ((TEncBinCABAC *)((TEncSbac*)m_pcEntropyCoder->m_pcEntropyCoderIf)->getEncBinIf())->getBinsCoded();
rpcTempCU->getTotalCost() = m_pcRdCost->calcRdCost( rpcTempCU->getTotalBits(), rpcTempCU->getTotalDistortion() );
Bool foundNonZeroCbf = false;
rpcTempCU->setQPSubCUs( rpcTempCU->getRefQP( 0 ), 0, uiDepth, foundNonZeroCbf );
assert( foundNonZeroCbf );
}
else
{
rpcTempCU->setQPSubParts( rpcTempCU->getRefQP( 0 ), 0, uiDepth ); // set QP to default QP
}
}
m_pcRDGoOnSbacCoder->store(m_pppcRDSbacCoder[uiDepth][CI_TEMP_BEST]);
// If the configuration being tested exceeds the maximum number of bytes for a slice / slice-segment, then
// a proper RD evaluation cannot be performed. Therefore, termination of the
// slice/slice-segment must be made prior to this CTU.
// This can be achieved by forcing the decision to be that of the rpcTempCU.
// The exception is each slice / slice-segment must have at least one CTU.
if (rpcBestCU->getTotalCost()!=MAX_DOUBLE)
{
const Bool isEndOfSlice = pcSlice->getSliceMode()==FIXED_NUMBER_OF_BYTES
&& ((pcSlice->getSliceBits()+rpcBestCU->getTotalBits())>pcSlice->getSliceArgument()<<3)
&& rpcBestCU->getCtuRsAddr() != pcPic->getPicSym()->getCtuTsToRsAddrMap(pcSlice->getSliceCurStartCtuTsAddr())
&& rpcBestCU->getCtuRsAddr() != pcPic->getPicSym()->getCtuTsToRsAddrMap(pcSlice->getSliceSegmentCurStartCtuTsAddr());
const Bool isEndOfSliceSegment = pcSlice->getSliceSegmentMode()==FIXED_NUMBER_OF_BYTES
&& ((pcSlice->getSliceSegmentBits()+rpcBestCU->getTotalBits()) > pcSlice->getSliceSegmentArgument()<<3)
&& rpcBestCU->getCtuRsAddr() != pcPic->getPicSym()->getCtuTsToRsAddrMap(pcSlice->getSliceSegmentCurStartCtuTsAddr());
// Do not need to check slice condition for slice-segment since a slice-segment is a subset of a slice.
if(isEndOfSlice||isEndOfSliceSegment)
{
rpcBestCU->getTotalCost()=MAX_DOUBLE;
}
}
//比较分块和更大一级块的代价
xCheckBestMode( rpcBestCU, rpcTempCU, uiDepth DEBUG_STRING_PASS_INTO(sDebug) DEBUG_STRING_PASS_INTO(sTempDebug) DEBUG_STRING_PASS_INTO(false) ); // RD compare current larger prediction
// with sub partitioned prediction.
}
}
DEBUG_STRING_APPEND(sDebug_, sDebug);
rpcBestCU->copyToPic(uiDepth); // Copy Best data to Picture for next partition prediction.
xCopyYuv2Pic( rpcBestCU->getPic(), rpcBestCU->getCtuRsAddr(), rpcBestCU->getZorderIdxInCtu(), uiDepth, uiDepth ); // Copy Yuv data to picture Yuv
if (bBoundary)
{
return;
}
// Assert if Best prediction mode is NONE
// Selected mode's RD-cost must be not MAX_DOUBLE.
assert( rpcBestCU->getPartitionSize ( 0 ) != NUMBER_OF_PART_SIZES );
assert( rpcBestCU->getPredictionMode( 0 ) != NUMBER_OF_PREDICTION_MODES );
assert( rpcBestCU->getTotalCost ( ) != MAX_DOUBLE );
}