GD32F350串口0 UART0

最新推荐文章于 2024-07-29 16:42:48 发布

houdezaiwu2020

最新推荐文章于 2024-07-29 16:42:48 发布

阅读量411

点赞数 10

文章标签：单片机 c语言 stm32

本文链接：https://blog.csdn.net/liuhfeng21/article/details/135642134

版权

#include "uart0.h"

/*!
    \brief      cofigure the USART0 GPIO ports
    \param[in]  none
    \param[out] none
    \retval     none
*/
void usart0_gpio_config(void)
{
    /* enable COM GPIO clock */
    rcu_periph_clock_enable(RCU_GPIOA);

    /* connect port to USARTx_Tx */
    gpio_af_set(GPIOA, GPIO_AF_1, GPIO_PIN_9);

    /* connect port to USARTx_Rx */
    gpio_af_set(GPIOA, GPIO_AF_1, GPIO_PIN_10);

    /* configure USART Tx as alternate function push-pull */
    gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO_PIN_9);
    gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, GPIO_PIN_9);

    /* configure USART Rx as alternate function push-pull */
    gpio_mode_set(GPIOA, GPIO_MODE_AF, GPIO_PUPD_PULLUP, GPIO_PIN_10);
    gpio_output_options_set(GPIOA, GPIO_OTYPE_PP, GPIO_OSPEED_10MHZ, GPIO_PIN_10);
}

/*!
    \brief      cofigure the USART0
    \param[in]  none
    \param[out] none
    \retval     none
*/
void usart0_config(void)
{
    /* enable USART clock */
    rcu_periph_clock_enable(RCU_USART0);

    /* USART configure */
    usart_deinit(USART0);
    usart_baudrate_set(USART0, 460800U);
    usart_receive_config(USART0, USART_RECEIVE_ENABLE);
    usart_transmit_config(USART0, USART_TRANSMIT_ENABLE);

    usart_enable(USART0);
}


void usart0_int_init(void)
{
    /* USART interrupt configuration */
    nvic_irq_enable(USART0_IRQn, 0, 1);
    
    usart_interrupt_enable(USART0, USART_INT_RBNE);
}


void usart0_init(void)
{
  usart0_gpio_config();
  usart0_config();
  usart0_int_init();
}


void usart0_send_ch(uint8_t ch)
{
    usart_data_transmit(USART0, (uint8_t) ch);
    while(RESET == usart_flag_get(USART0, USART_FLAG_TBE));
}

void uart0_Send_Array(unsigned char send_array[],unsigned char num)
{
	//串口发送
	unsigned char i=0;
	for(i=0 ;i< num ; i++)
	{
		usart0_send_ch(send_array[i]);
	}

        
}

/* retarget the C library printf function to the USART */
int fputc(int ch, FILE *f)
{
    usart_data_transmit(USART0, (uint8_t) ch);
    while(RESET == usart_flag_get(USART0, USART_FLAG_TBE));
    return ch;
}

中断

void USART0_IRQHandler(void)
{
  uint16_t re = 0;
    if(RESET != usart_interrupt_flag_get(USART0, USART_INT_FLAG_RBNE)){
        /* receive data */
      re = usart_data_receive(USART0);
      
        if( re == 13)
        {
          usart0_send_ch('\r');
          usart0_send_ch('\n');
        }else
           usart0_send_ch(re);
    }
}