x264参数配置

x264提供了一些配置模板来适应各种编解码场合：
preset：x264参数配置-preset
tune：x264参数配置-tune

默认参数配置

	//帧率25fps
    param->i_fps_num       = 25;
    param->i_fps_den       = 1;

	 /* Encoder parameters 
	 * 帧类型决策相关 */
    param->i_frame_reference = 3;	//参考帧列表3帧
    param->i_keyint_max = 250;		//关键帧距离最大250帧
    param->i_keyint_min = X264_KEYINT_MIN_AUTO;
    param->i_bframe = 3;			//两个非B帧间最多3个B帧
    param->i_scenecut_threshold = 40;	//使用场景切换&&阈值40
    param->i_bframe_adaptive = X264_B_ADAPT_FAST;	//使用fast进行b帧自适应
    param->i_bframe_bias = 0;		
    param->i_bframe_pyramid = X264_B_PYRAMID_NORMAL;//任意B帧作为参考帧
    param->b_interlaced = 0;		//不使用场编码
    param->b_constrained_intra = 0;

	/* 环路滤波相关 */
    param->b_deblocking_filter = 1;	//开启环路滤波
    param->i_deblocking_filter_alphac0 = 0;	//环路滤波alpha值默认0
    param->i_deblocking_filter_beta = 0;	//环路滤波beta值默认0

	/* 熵编码相关 */
    param->b_cabac = 1;	//使用cabac
    param->i_cabac_init_idc = 0;

	/* 码控相关 */
    param->rc.i_rc_method = X264_RC_CRF;	//默认CRF码控
    param->rc.i_bitrate = 0;				//关闭ABR
    param->rc.f_rate_tolerance = 1.0;		//bitrate波动1%
	//关闭vbv
    param->rc.i_vbv_max_bitrate = 0;
    param->rc.i_vbv_buffer_size = 0;
    param->rc.f_vbv_buffer_init = 0.9;
    //关闭CQP
    param->rc.i_qp_constant = -1;
	//默认ratefactor为23
    param->rc.f_rf_constant = 23;
	//qp不设限，即[0,2^31-1]
    param->rc.i_qp_min = 0;
    param->rc.i_qp_max = INT_MAX;
    //帧间最大qp跨度为4
    param->rc.i_qp_step = 4;
	//I帧到P帧qscale转化因子
    param->rc.f_ip_factor = 1.4;
	//P帧到B帧qscale转化因子
    param->rc.f_pb_factor = 1.3;
	//帧内adaptive qp方法用variance
    param->rc.i_aq_mode = X264_AQ_VARIANCE;
	//adaptive ap强度1.0
    param->rc.f_aq_strength = 1.0;
    //码控lookahead队列长度40
    param->rc.i_lookahead = 40;

	/* 2pass相关 */
	//不写stat
    param->rc.b_stat_write = 0;
    param->rc.psz_stat_out = "x264_2pass.log";
	//不读stat
    param->rc.b_stat_read = 0;
    param->rc.psz_stat_in = "x264_2pass.log";
	//非线性压缩因子0.6
    param->rc.f_qcompress = 0.6;
    param->rc.f_qblur = 0.5;
    param->rc.f_complexity_blur = 20;
	//无zone
    param->rc.i_zones = 0;
	//使用mb tree
    param->rc.b_mb_tree = 1;

    /* 预测分析相关 */
	//允许intra4x4 intra8x8
    param->analyse.intra = X264_ANALYSE_I4x4 | X264_ANALYSE_I8x8;
	//允许intra4x4和8x8，inter 8x8 8x16 16x8 16x16之间
    param->analyse.inter = X264_ANALYSE_I4x4 | X264_ANALYSE_I8x8
                         | X264_ANALYSE_PSUB16x16 | X264_ANALYSE_BSUB16x16;
    param->analyse.i_direct_mv_pred = X264_DIRECT_PRED_SPATIAL;
	//运动搜索 六边形搜索
    param->analyse.i_me_method = X264_ME_HEX;
    param->analyse.f_psy_rd = 1.0;
    param->analyse.b_psy = 1;
    param->analyse.f_psy_trellis = 0;
	//运动搜索范围16个像素点
    param->analyse.i_me_range = 16;
	//下采样质量7
    param->analyse.i_subpel_refine = 7;
	//允许宏块各划分子块独立参考帧
    param->analyse.b_mixed_references = 1;
	//允许P帧进行色度运动估计
    param->analyse.b_chroma_me = 1;
    param->analyse.i_mv_range_thread = -1;
    param->analyse.i_mv_range = -1; // set from level_idc
	//色度qp偏移量为0
    param->analyse.i_chroma_qp_offset = 0;
	//使用快速pskip决定
    param->analyse.b_fast_pskip = 1;
	//开启权重双向预测
    param->analyse.b_weighted_bipred = 1;
	//权重单向预测方法
	param->analyse.i_weighted_pred = X264_WEIGHTP_SMART;
	//是否使用P帧残差系数阈值
    param->analyse.b_dct_decimate = 1;
	//开启8x8 int-DCT变换
    param->analyse.b_transform_8x8 = 1;
    param->analyse.i_trellis = 1;
    param->analyse.i_luma_deadzone[0] = 21;
    param->analyse.i_luma_deadzone[1] = 11;
	//不进行psnr/ssim计算
    param->analyse.b_psnr = 0;
    param->analyse.b_ssim = 0;