RIP实验

要求

1.路由器分别配置环回
2.连接路由器的网段12.1.1.0/24 23.1.1.0/24
3.r1 r3网络地址192.168.1.0/24 192.168.2.0/24
4.整个全网可达

分析

1.环回接口配置IP
2.RIP协议配置
3.接口IP配置
4.电脑ip配置

1.R1配置

<Huawei>sys	
<Huawei>system-view 
[Huawei]interface Loopback 1
[Huawei-LoopBack1]ip address 1.1.1.1 32
[Huawei-LoopBack1]q
[Huawei]inter	
[Huawei]interface g	
[Huawei]interface GigabitEthernet 0/0/0
[Huawei-GigabitEthernet0/0/0]ip addre	
[Huawei-GigabitEthernet0/0/0]ip address 192.168.1.1 24
Aug 15 2022 22:09:08-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol
 IP on the interface GigabitEthernet0/0/0 has entered the UP state. 
[Huawei-GigabitEthernet0/0/0]q
[Huawei]interface GigabitEthernet 0/0/1
[Huawei-GigabitEthernet0/0/1]ip address 12.1.1.1 24
Aug 15 2022 22:10:06-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[1]:The line protocol
 IP on the interface GigabitEthernet0/0/1 has entered the UP state. 
[Huawei-GigabitEthernet0/0/1]q
<Huawei>dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 4
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 4
The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              192.168.1.1/24       up         up        
GigabitEthernet0/0/1              12.1.1.1/24          up         up        
GigabitEthernet0/0/2              unassigned           down       down      
LoopBack1                         1.1.1.1/32           up         up(s)     
NULL0                             unassigned           up         up(s)     
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]rip 1
[Huawei-rip-1]version 2
[Huawei-rip-1]network 1.1.1.1
[Huawei-rip-1]network 1.0.0.0
[Huawei-rip-1]network 12.0.0.0