IPV4 DHCP中继实验

1.实验要求：

2.实施——拓扑搭建

 

3.实施——配置设备

3.1所有节点均拥有合理IP地址

sysname R1
#
interface GigabitEthernet0/0/0
 ip address 192.168.1.1 255.255.255.0 
#
interface GigabitEthernet0/0/1
 ip address 12.1.1.1 255.255.255.0 

sysname R2
#
interface GigabitEthernet0/0/0
 ip address 12.1.1.2 255.255.255.0 
#
interface GigabitEthernet0/0/1
 ip address 23.1.1.1 255.255.255.0 

sysname R3
#
interface GigabitEthernet0/0/0
 ip address 23.1.1.2 255.255.255.0 
#
interface GigabitEthernet0/0/1
 ip address 34.1.1.1 255.255.255.0 

sysname R4
#
interface GigabitEthernet0/0/0
 ip address 34.1.1.2 255.255.255.0 
#
interface LoopBack0
 ip address 4.4.4.4 255.255.255.0 

3.2起动态协议ospf

R1
#
ospf 1 router-id 1.1.1.1 
 area 0.0.0.0 
  network 12.1.1.1 0.0.0.0 
  network 192.168.1.0 0.0.0.255    这个接口也要工作在ospf里，否则路由不通，中继也无法实现

R2
#
ospf 1 router-id 2.2.2.2 
 area 0.0.0.0 
  network 12.1.1.2 0.0.0.0 
  network 23.1.1.1 0.0.0.0 

R3
#
ospf 1 router-id 3.3.3.3 
 area 0.0.0.0 
  network 23.1.1.2 0.0.0.0 
  network 34.1.1.1 0.0.0.0 

R4
#
ospf 1 router-id 4.4.4.4 
 area 0.0.0.0 
  network 4.4.4.4 0.0.0.0 
  network 34.1.1.2 0.0.0.0 

3.3配置中继

R4
#
dhcp enable
#
ip pool DHCP
 gateway-list 192.168.1.1 
 network 192.168.1.0 mask 255.255.255.0 
 dns-list 61.134.1.4 
#
interface GigabitEthernet0/0/0
 dhcp select global

R1
#
dhcp enable
#
dhcp server group DHCP 
 dhcp-server 34.1.1.2 0
#
interface GigabitEthernet0/0/0
 dhcp select relay
 dhcp relay server-select DHCP

4.测试