【JLINK】J-link Commander

 官方参考文档：J-Link Commander - SEGGER Wiki

一、运行

        打开windows命令行窗口，找到有jlink.exe文件的地方，直接输入jlink.exe即可运行

二、常用命令

输入命令时候，大小写不影响

Command (long)	Command (short)	Explanation	Example
Basic
?	?	Show information about all or specific commands
Exit	Exit	Close J-Link connection and quit
Configuration - J-Link
SelectProbe	SelPrb	Show list of all connected probes via specified interface. The Probe to communicate with can then be selected	SelectProbe USB IP
ShowEmuList	ShowEmuList	Show list of all connected probes via specified interface	ShowEmuList USB IP
USB	USB	Connect to J-Link via USB	1、USB 600100000 2、USB J-Link
Configuration - Target (CPU)
Connect	Con	Connect to target device
Device	Device	Select specific device J-Link shall connect to
Debugging
Halt	H	Halt CPU
Reset	R	Reset CPU
Debugging - Memory operation
Mem	Mem	Read memory and show corresponding ASCII values	Mem 0x0 0x100
Mem8	Mem8	Read 8-bit items	mem8 0x08000000 16
Mem16	Mem16	Read 16-bit items	Mem16 0x0 100
Mem32	Mem32	Read 32-bit items