1.CTime
CTime currentTime = CTime::GetCurrentTime();
CString strYear, strMonth;
strYear.Format("%04d", currentTime.GetYear());
strMonth.Format("%04d-%02d", currentTime.GetYear(), currentTime.GetMonth());
2.time_t
time_t currentTime = time(NULL);
struct tm *local;
local=localtime(¤tTime);
CString strYear, strMonth;
strYear.Format("%04d", local->tm_year);
strMonth.Format("%04d-%02d", local->tm_year, local->int tm_mon);
再定义一个tm结构体
struct tm
{
int tm_sec; /* 秒 – 取值区间为[0,59] */
int tm_min; /* 分 - 取值区间为[0,59] */
int tm_hour; /* 时 - 取值区间为[0,23] */
int tm_mday; /* 一个月中的日期 - 取值区间为[1,31] */
int tm_mon; /* 月份(从一月开始,0代表一月) - 取值区间为[0,11] */
int tm_year; /* 年份,其值等于实际年份减去1900 */
int tm_wday; /* 星期 – 取值区间为[0,6],其中0代表星期天,1代表星期一,以此推 */int tm_yday; /* 从每年的1月1日开始的天数 – 取值区间为[0,365],其中0代表1月1日,1代表1月2日,以此类推 */
int tm_isdst; /* 夏令时标识符,实行夏令时的时候,tm_isdst为正。不实行夏令时的进候,tm_isdst为0;不了解情况时,tm_isdst()为负。*/
};
3.Cstring startTime = GetTickCount()
GetTickcount函数:它返回从操作系统启动到当前所经过的毫秒数,常常用来判断某个方法执行的时间,其函数原型是DWORD GetTickCount(void),返回值以32位的双字类型DWORD存储,因此可以存储的最大值是(2^32-1) ms约为49.71天,因此若系统运行时间超过49.71天时,这个数就会归0,MSDN中也明确的提到了:“Retrieves the number of milliseconds that have elapsed since the system was started, up to 49.7 days.”。因此,如果是编写服务器端程序,此处一定要万分注意,避免引起意外的状况(如需避免此种情况可使用Ctime类或者是系统API的SYSTEMTIME进行判断)。这个函数并非实时发送,而是由系统每18ms发送一次,因此其最小精度为18ms。当需要有小于18ms的精度计算时,应使用StopWatch方法进行