2021-05-24

最新推荐文章于 2024-04-02 12:57:52 发布
最新推荐文章于 2024-04-02 12:57:52 发布
阅读量725 收藏 1
点赞数
文章标签： 安全
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/m0_56229717/article/details/117229849
版权

 

 

R1

The device is running!

 

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sysname r1

[r1]intefa

[r1]intefag

[r1]inte

[r1]interface g

[r1]interface GigabitEthernet 0/0/1

[r1-GigabitEthernet0/0/1]ip add

[r1-GigabitEthernet0/0/1]ip address 192.168.1.1 255.255.255.0

May 20 2021 14:47:21-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP

on the interface GigabitEthernet0/0/1 has entered the UP state.

[r1-GigabitEthernet0/0/1]dhc

[r1-GigabitEthernet0/0/1]dhcp se

[r1-GigabitEthernet0/0/1]dhcp select g

[r1-GigabitEthernet0/0/1]dhcp select global

Error: Please enable DHCP in the global view first.

[r1-GigabitEthernet0/0/1]q

[r1]dh

[r1]dhcp EN

[r1]dhcp enable

Info: The operation may take a few seconds. Please wait for a moment.done.

[r1]INTERF

[r1]interface G

[r1]interface GigabitEthernet 0/0/1

[r1-GigabitEthernet0/0/1]DECP

[r1-GigabitEthernet0/0/1]DECP

[r1-GigabitEthernet0/0/1]DECP se

[r1-GigabitEthernet0/0/1]DHC

[r1-GigabitEthernet0/0/1]dhcp SE

[r1-GigabitEthernet0/0/1]dhcp select G

[r1-GigabitEthernet0/0/1]dhcp select global

[r1-GigabitEthernet0/0/1]Q

[r1]ip poo

[r1]ip pool caomi

Info: It's successful to create an IP address pool.

[r1-ip-pool-caomi]gat

[r1-ip-pool-caomi]gateway-list 192.168.1.1

[r1-ip-pool-caomi]netw

[r1-ip-pool-caomi]network 192.168.1.0 mask 255.255.255.0

[r1-ip-pool-caomi]dns

[r1-ip-pool-caomi]dns-list 8.8.8.8

[r1-ip-pool-caomi]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r1>sys

Enter system view, return user view with Ctrl+Z.

[r1]interf

[r1]interface ser

[r1]interface Serial 4/0/0

[r1-Serial4/0/0]ip add

[r1-Serial4/0/0]ip address 15.1.1.1 255.255.255.252

[r1-Serial4/0/0]link

[r1-Serial4/0/0]link-protocol pp

[r1-Serial4/0/0]link-protocol ppp

[r1-Serial4/0/0]ppp aut

[r1-Serial4/0/0]ppp authentication-mode pap

[r1-Serial4/0/0]ppp pap loc

[r1-Serial4/0/0]ppp pap local-user caomi paass

[r1-Serial4/0/0]ppp pap local-user caomi pass

[r1-Serial4/0/0]ppp pap local-user caomi password cih

[r1-Serial4/0/0]ppp pap local-user caomi password chi

[r1-Serial4/0/0]ppp pap local-user caomi password cip

[r1-Serial4/0/0]ppp pap local-user caomi password cipher 123

[r1-Serial4/0/0]q

[r1]interf

[r1]interface tun

[r1]interface Tunnel 0/0/0

[r1-Tunnel0/0/0]ip add

[r1-Tunnel0/0/0]ip address 10.1.1.1 255.255.255.0

[r1-Tunnel0/0/0]un

[r1-Tunnel0/0/0]undo rip s

[r1-Tunnel0/0/0]undo rip split-horizon

[r1-Tunnel0/0/0]tun

[r1-Tunnel0/0/0]tunnel-protocol gr

[r1-Tunnel0/0/0]tunnel-protocol gre p

[r1-Tunnel0/0/0]tunnel-protocol gre p2mp

[r1-Tunnel0/0/0]sou

[r1-Tunnel0/0/0]source 15.1.1.1

[r1-Tunnel0/0/0]nhr

[r1-Tunnel0/0/0]nhrp ent

[r1-Tunnel0/0/0]nhrp entry mu

[r1-Tunnel0/0/0]nhrp entry multicast dy

[r1-Tunnel0/0/0]nhrp entry multicast dynamic

[r1-Tunnel0/0/0]nh

[r1-Tunnel0/0/0]nhrp ne

[r1-Tunnel0/0/0]nhrp network-id  100

[r1-Tunnel0/0/0]q

[r1]tun

[r1]tunnel 0/0/1

           ^

Error: Unrecognized command found at '^' position.

[r1]interf

[r1]interface tun

[r1]interface Tunnel 0/0/1

[r1-Tunnel0/0/1]ip add

[r1-Tunnel0/0/1]ip address 100.1.1.1 24

[r1-Tunnel0/0/1]tun

[r1-Tunnel0/0/1]tunnel-protocol gr

[r1-Tunnel0/0/1]tunnel-protocol gre

[r1-Tunnel0/0/1]sour

[r1-Tunnel0/0/1]source 15.1.1.1

[r1-Tunnel0/0/1]dest

[r1-Tunnel0/0/1]destination 45.1.1.1

[r1-Tunnel0/0/1]q

[r1]ip rout

[r1]ip route-s

[r1]ip route-static 0.0.0.0 0.0.0.0 ser

[r1]ip route-static 0.0.0.0 0.0.0.0 Serial 4/0/0

[r1]rip

[r1-rip-1]ver

[r1-rip-1]versi

[r1-rip-1]version 2

[r1-rip-1]undo su

[r1-rip-1]undo summary

[r1-rip-1]netw

[r1-rip-1]network 192.168.1.0

[r1-rip-1]netw

[r1-rip-1]network 10.0.0.0

[r1-rip-1]netw

[r1-rip-1]network 100.0.0.0

[r1-rip-1]slit

[r1-rip-1]sli

[r1-rip-1]sil

[r1-rip-1]silent-interface g

[r1-rip-1]silent-interface GigabitEthernet 0/0/1

[r1-rip-1]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r1>sys

Enter system view, return user view with Ctrl+Z.

[r1]acl 2000

[r1-acl-basic-2000]ru

[r1-acl-basic-2000]rule 0 PERM

[r1-acl-basic-2000]rule 0 permit sou

[r1-acl-basic-2000]rule 0 permit source 192.168.1.0 0.0.0.2555

                                                    ^

Error: Wrong parameter found at '^' position.

[r1-acl-basic-2000]rule 0 permit source 192.168.1.0 0.0.0.255

[r1-acl-basic-2000]q

[r1]interf

[r1]interface g

[r1]interface ser

[r1]interface Serial 4/0/0

[r1-Serial4/0/0]out

[r1-Serial4/0/0]nat out

[r1-Serial4/0/0]nat outbound 2000

[r1-Serial4/0/0]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r1>ping 15.1.1.2

  PING 15.1.1.2: 56  data bytes, press CTRL_C to break

    Reply from 15.1.1.2: bytes=56 Sequence=1 ttl=255 time=20 ms

    Reply from 15.1.1.2: bytes=56 Sequence=2 ttl=255 time=30 ms

    Reply from 15.1.1.2: bytes=56 Sequence=3 ttl=255 time=30 ms

    Reply from 15.1.1.2: bytes=56 Sequence=4 ttl=255 time=10 ms

    Reply from 15.1.1.2: bytes=56 Sequence=5 ttl=255 time=40 ms

 

  --- 15.1.1.2 ping statistics ---

    5 packet(s) transmitted

    5 packet(s) received

    0.00% packet loss

    round-trip min/avg/max = 10/26/40 ms

 

<r1>ping 10.1.1.3

  PING 10.1.1.3: 56  data bytes, press CTRL_C to break

    Request time out

    Request time out

    Request time out

    Request time out

    Request time out

 

  --- 10.1.1.3 ping statistics ---

    5 packet(s) transmitted

    0 packet(s) received

    100.00% packet loss

 

<r1>ping 100.1.1.2

  PING 100.1.1.2: 56  data bytes, press CTRL_C to break

    Request time out

    Request time out

    Request time out

    Request time out

    Request time out

 

  --- 100.1.1.2 ping statistics ---

    5 packet(s) transmitted

    0 packet(s) received

    100.00% packet loss

 

<r1>ping 45.1.1.1

  PING 45.1.1.1: 56  data bytes, press CTRL_C to break

    Request time out

    Request time out

    Request time out

    Request time out

    Request time out

 

  --- 45.1.1.1 ping statistics ---

    5 packet(s) transmitted

    0 packet(s) received

    100.00% packet loss

 

<r1>

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

 

R3

The device is running!

 

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sysname r3

[r3]dhcp se

[r3]dhcp server

                ^

Error:Incomplete command found at '^' position.

[r3]dhcp sele

[r3]interf

[r3]interface g

[r3]interface GigabitEthernet 0/0/1

[r3-GigabitEthernet0/0/1]ip add

[r3-GigabitEthernet0/0/1]ip address 192.168.3.1 24

May 20 2021 14:54:57-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP

on the interface GigabitEthernet0/0/1 has entered the UP state.

[r3-GigabitEthernet0/0/1]q

[r3]dhc

[r3]dhcp en

[r3]dhcp enable

Info: The operation may take a few seconds. Please wait for a moment.done.

[r3]interf

[r3]interface g

[r3]interface GigabitEthernet 0/0/1

[r3-GigabitEthernet0/0/1]dhcp

[r3-GigabitEthernet0/0/1]dhcp se

[r3-GigabitEthernet0/0/1]dhcp select g

[r3-GigabitEthernet0/0/1]dhcp select global

[r3-GigabitEthernet0/0/1]q

[r3]ip poo

[r3]ip pool caomi

Info: It's successful to create an IP address pool.

[r3-ip-pool-caomi]gatw

[r3-ip-pool-caomi]gatw

[r3-ip-pool-caomi]gate

[r3-ip-pool-caomi]gateway-list 192.168.3.1

[r3-ip-pool-caomi]netw

[r3-ip-pool-caomi]network 192.168.3.0 ma

[r3-ip-pool-caomi]network 192.168.3.0 mask 255.255.255.0

[r3-ip-pool-caomi]des

[r3-ip-pool-caomi]dns

[r3-ip-pool-caomi]dns-list 8.8.8.8

[r3-ip-pool-caomi]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r3>sys

Enter system view, return user view with Ctrl+Z.

[r3]interf

           ^

Error:Incomplete command found at '^' position.

[r3]interf

[r3]interface ser

[r3]interface Serial 4/0/0

[r3-Serial4/0/0]ip add

[r3-Serial4/0/0]ip address 35.1.1.1 24

[r3-Serial4/0/0]q

[r3]interf

[r3]interface tun

[r3]interface Tunnel 0

                     ^

Error: Wrong parameter found at '^' position.

[r3]interface Tunnel 0/0/0

[r3-Tunnel0/0/0]ip add

[r3-Tunnel0/0/0]ip address 10.1.1.3

                                    ^

Error:Incomplete command found at '^' position.

[r3-Tunnel0/0/0]ip address 10.1.1.3 24

[r3-Tunnel0/0/0]tun

[r3-Tunnel0/0/0]tunnel-protocol gr

[r3-Tunnel0/0/0]tunnel-protocol gre m

[r3-Tunnel0/0/0]tunnel-protocol gre g

[r3-Tunnel0/0/0]tunnel-protocol gre m

[r3-Tunnel0/0/0]tunnel-protocol gre p

[r3-Tunnel0/0/0]tunnel-protocol gre p2mp

[r3-Tunnel0/0/0]ppp mo

[r3-Tunnel0/0/0]sou

[r3-Tunnel0/0/0]source ser

[r3-Tunnel0/0/0]source Serial 4/0/0

[r3-Tunnel0/0/0]nh

[r3-Tunnel0/0/0]nhrp en

[r3-Tunnel0/0/0]nhrp entry 10.1.1.1 15.1.1.1 er

[r3-Tunnel0/0/0]nhrp entry 10.1.1.1 15.1.1.1 re

[r3-Tunnel0/0/0]nhrp entry 10.1.1.1 15.1.1.1 register

[r3-Tunnel0/0/0]q

[r3]interf

[r3]interface sr

[r3]interface ser

[r3]interface Serial 4/0/0

[r3-Serial4/0/0]lik

[r3-Serial4/0/0]lin

[r3-Serial4/0/0]link-protocol hd

[r3-Serial4/0/0]link-protocol hdlc

Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]

:y

May 20 2021 16:02:29-08:00 r3 %%01IFNET/4/CHANGE_ENCAP(l)[0]:The user performed

the configuration that will change the encapsulation protocol of the link and th

en selected Y.

[r3-Serial4/0/0]

[r3-Serial4/0/0]

May 20 2021 16:02:29-08:00 r3 %%01PPP/4/PHYSICALDOWN(l)[1]:On the interface Seri

al4/0/0, PPP link was closed because the status of the physical layer was Down.

 

[r3-Serial4/0/0]

May 20 2021 16:02:29-08:00 r3 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol PPP

 on the interface Serial4/0/0 has entered the DOWN state.

[r3-Serial4/0/0]

May 20 2021 16:02:29-08:00 r3 %%01IFPDT/4/IF_STATE(l)[3]:Interface Serial4/0/0 h

as turned into DOWN state.

[r3-Serial4/0/0]

May 20 2021 16:02:30-08:00 r3 %%01IFPDT/4/IF_STATE(l)[4]:Interface Serial4/0/0 h

as turned into UP state.

[r3-Serial4/0/0]

May 20 2021 16:02:30-08:00 r3 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol IP

on the interface Serial4/0/0 has entered the UP state.

[r3-Serial4/0/0]

May 20 2021 16:02:30-08:00 r3 %%01IFNET/4/LINK_STATE(l)[6]:The line protocol IP

on the interface Tunnel0/0/0 has entered the UP state.

[r3-Serial4/0/0]ip add

[r3-Serial4/0/0]ip address 35.1.1.1 24

Error: The address already exists.

[r3-Serial4/0/0]ip address 35.1.1.1 255.2

May 20 2021 16:03:30-08:00 r3 %%01IFNET/4/LINK_STATE(l)[7]:The line protocol IP

on the interface Serial4/0/0 has entered the DOWN state.

[r3-Serial4/0/0]ip address 35.1.1.1 255.2

May 20 2021 16:03:30-08:00 r3 %%01IFNET/4/LINK_STATE(l)[8]:The line protocol IP

on the interface Tunnel0/0/0 has entered the DOWN state.

[r3-Serial4/0/0]ip address 35.1.1.1 255.255.255.252

[r3-Serial4/0/0]q

[r3]ip rout

[r3]ip route-s

[r3]ip route-static 0.0.0.0 0.0.0.0 ser

[r3]ip route-static 0.0.0.0 0.0.0.0 Serial 4/0/0

[r3]rip

[r3-rip-1]

[r3-rip-1]vers

[r3-rip-1]version 2

[r3-rip-1]netw

[r3-rip-1]network 10.0.0.0

[r3-rip-1]netw

[r3-rip-1]network 192.168.3.0

[r3-rip-1]q

[r3]acl 2000

[r3-acl-basic-2000]ru

[r3-acl-basic-2000]rule 0 per

[r3-acl-basic-2000]rule 0 permit sou

[r3-acl-basic-2000]rule 0 permit source 192.168.3.0 0.0.0.255

[r3-acl-basic-2000]q

[r3]interf

[r3]interface ser

[r3]interface Serial 4/0/0

[r3-Serial4/0/0]nat out

[r3-Serial4/0/0]nat outbound 2000

[r3-Serial4/0/0]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

 

 

R5

The device is running!

 

<Huawei>sys

Enter system view, return user view with Ctrl+Z.

[Huawei]sysname r5

[r5]interf

[r5]interface l

[r5]interface LoopBack 0

[r5-LoopBack0]ip add

[r5-LoopBack0]ip address 5.5.5.5 24

[r5-LoopBack0]q

[r5]aaa

[r5-aaa]loc

[r5-aaa]local-user caomi pass

[r5-aaa]local-user caomi password ci

[r5-aaa]local-user caomi password cipher 123

Info: Add a new user.

[r5-aaa]loc

[r5-aaa]local-user t

[r5-aaa]local-user se

[r5-aaa]local-user ser

[r5-aaa]local-user caomi ser

[r5-aaa]local-user caomi service-type ppp

[r5-aaa]q

[r5]interf

[r5]interface ser

[r5]interface Serial 3/0/0

[r5-Serial3/0/0]l

[r5-Serial3/0/0]link

[r5-Serial3/0/0]link-protocol ppp

[r5-Serial3/0/0]link-protocol ppp

[r5-Serial3/0/0]ppp au

[r5-Serial3/0/0]ppp authentication-mode pa

[r5-Serial3/0/0]ppp authentication-mode pap

[r5-Serial3/0/0]ppp pap l

[r5-Serial3/0/0]ppp pap local-user caomi pass

[r5-Serial3/0/0]ppp pap local-user caomi password ci

[r5-Serial3/0/0]ppp pap local-user caomi password cipher 123

[r5-Serial3/0/0]ip add

[r5-Serial3/0/0]ip address 15.1.1.2 24

[r5-Serial3/0/0]

May 20 2021 16:15:27-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol PPP

 IPCP on the interface Serial3/0/0 has entered the UP state.

[r5-Serial3/0/0]q

[r5]inter

[r5]interface sre

[r5]interface sre

[r5]interface ser

[r5]interface Serial 3/0/0

[r5-Serial3/0/0]l

[r5-Serial3/0/0]link

[r5-Serial3/0/0]link-protocol ppp

[r5-Serial3/0/0]link-protocol ppp

[r5-Serial3/0/0]ppp au

[r5-Serial3/0/0]ppp authentication-mode chap

[r5-Serial3/0/0]ppp chap u

[r5-Serial3/0/0]ppp chap user caomi paa

[r5-Serial3/0/0]ppp chap user caomi pass

[r5-Serial3/0/0]ppp chap user caomi

[r5-Serial3/0/0]ppp chap pass

[r5-Serial3/0/0]ppp chap password ci

[r5-Serial3/0/0]ppp chap password cipher 123

[r5-Serial3/0/0]ip add

[r5-Serial3/0/0]q

[r5]interf

[r5]interface ser

[r5]interface Serial 4/0/0

[r5-Serial4/0/0]ip ad

[r5-Serial4/0/0]ip address 25.1.1.2 24

[r5-Serial4/0/0]

May 20 2021 16:17:50-08:00 r5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol PPP

 IPCP on the interface Serial4/0/0 has entered the UP state.

[r5-Serial4/0/0]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

<r5>sys

Enter system view, return user view with Ctrl+Z.

[r5]rip

[r5-rip-1]ves

[r5-rip-1]versio

[r5-rip-1]version 2

[r5-rip-1]undo

[r5-rip-1]undo su

[r5-rip-1]undo summary

[r5-rip-1]netw

[r5-rip-1]network 100.1.1.1 24

                            ^

Error:Too many parameters found at '^' position.

[r5-rip-1]network 100.1.1.1 255.255.255.0

                            ^

Error:Too many parameters found at '^' position.

[r5-rip-1]

 

  Please check whether system data has been changed, and save data in time

 

  Configuration console time out, please press any key to log on

 

 

、

 

m0_56229717
关注
  • 0
    点赞
  • 踩
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
2021-08-06软考网工的一个简单的综合实验
akswyh的博客
08-06 1739
拓扑： PC1和PC2都设置成dhcp获取ip，PC1属于10网段，标记为教学区；PC2属于20网段，标记为宿舍区 LSW1作为接入交换机 LSW2作为核心交换机 AR1作为外网入口 AR2表示电信运营商的路由器 AR3表示联通运营商的路由器 基本配置： LSW1： [acsw]vlan batch 10 20 Info: This operation may take a few seconds. Please wait for a moment...done. [acsw]int g0/0/1 [ac
IP复习第十天 VLAN间互通
m0_56229717的博客
07-18 1117
代码 Please press enter to start cmd line! ################################################################################ ################################################ <Huawei> Jul 18 2021 16:59:31-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Inte....
云计算第3日
tttxhfgb的博客
11-15 371
1下发固定ip2排除[r5]ip[r5]in[r5]hd[r5]dh[r5]in。
DHCP实验
WyzDream的博客
01-05 627
实验要求：PC通过DHCP获取IP地址，所有PC可以互相访问 实验步骤： 1.给路由器配置IP地址 [R1]int g0/0/0 [R1-GigabitEthernet0/0/0]ip address 192.168.1.1 24 [R1-GigabitEthernet0/0/0]int g0/0/1 [R1-GigabitEthernet0/0/1]ip address 192.168.2.1 24 2.在路由器上配置DHCP [R1]dhcp enable 开启DHCP服务 [R1]ip p.
ensp之RIP小实验
AXDRXS的博客
07-23 404
对其进行子网划分，网络位借一位：192.168.1.128/27。对其进行子网划分，网络位借一位：192.168.1.192/27。环回汇总：[r1]192.168.1.128/26。环回汇总：[r2]192.168.1.192/26。[r3]一个环回接口L0：3.3.3.3/24。骨干链路：192.168.1.0/26。
2021-05-24 数字证书相关指引.pdf
06-04
数字证书相关指引
2021-03-05_20-14-58_Underwater Survival Base.zip
03-07
2021年3月5日20时14分58秒，这个项目被封装在名为"2021-03-05_20-14-58_Underwater Survival Base.zip"的压缩文件中，它可能包含了设计图纸、研究报告、技术文档等一系列珍贵资料，为我们的讨论提供了宝贵的素材。...
优质资料（2021-2022年收藏）数控车工技师理论知识试卷05.doc
10-11
这是一份2021-2022年度的浙江省职业技能鉴定统一试卷，针对数控车工技师的理论知识考核。考试包含两大部分：理论知识（占比80%）和职业道德（占比20%），总时长120分钟。考生需要在指定位置填写个人信息，并严格按照...
2021-2022收藏的精品资料2021-2022年APQP全套表单——新产品质量策划进度计划APQP.doc
09-16
2. **确定新产品项目开发任务**：开发部根据分析结果制定设计开发任务书（TR-0701-05），并组建APQP小组，确定参与人员（TR-0701-06）。 3. **编制新产品项目APQP开发计划**：开发部负责制定详细的新产品项目APQP...
minio-RELEASE.2023-01-31T02-24-19Z版本
02-08
新版本配置 export MINIO_ROOT_USER=admin export MINIO_ROOT_PASSWORD=12345678 原旧版本中的配置是MINIO_ACCESS_KEY和MINIO_SECRET_KEY，请注意别在各博客中直接复制把自己的配置写错了，新下载的minio是用不了旧...
HCIA第二天作业
qq_49310821的博客
07-08 159
ip配置 [R1]interface s0/0/0 [R1-Serial0/0/0]ip add [R1-Serial0/0/0]ip address 192.168.1.1 24 [R1]interface LoopBack 0 [R1-LoopBack0]ip address 1.1.1.1 [R2]interface s0/0/0 [R2-Serial0/0/0]ip add [R2-Serial0/0/0]ip address 192.168.2.1 24 [R2]interface L
2021-05-20
m0_56229717的博客
05-20 891
题目要求 拓扑图 R1 on the interface GigabitEthernet0/0/1 has entered the UP state. [r1-GigabitEthernet0/0/1] Please check whether system data has been changed, and save data in time Configuration console time...
第三章----综合实验
最新发布
2301_80656891的博客
04-02 629
8.使用NAT技术创建ACL放通内网流量。开启R1伪广播，关闭RIP水平分割。
计算机网络之广域网基础以及华为eNSP实验配置
爱学习的JackYang的博客
08-02 4568
计算机网络 广域网 华为 eNSP PPP协议 PPPOE协议 PAP认证 CHAP认证
小白学习一eNSP华为模拟器（17）PPP的认证
qq_46112068的博客
05-22 1934
大家好! 我叫风清云淡,有句话说“相识是缘”，我也希望多多认识一些志同道和的朋友。作为一名互联网行业的小萌新，写博客一方面是为了记录自己的学习过程，另一方面是总结自己所犯的错误希望能够帮助到很多和自己一样处于起步阶段的萌新。但由于其专业水平有限????，博客中难免会有一些bug出现，有错误之处还请各位大佬多多赐教 由于现在越来越多的人未经本人同意直接爬取博主本人文章，博主在此特别声明：未经本人允许，禁止转载！！！ 文章目录实验二十二PPP的认证实验内容实验步骤1、基本配置2、搭建OSPF网络3、配置PP
华为多臂路由_网络小白学网工笔记（1）：单臂路由实验
weixin_39682477的博客
01-12 556
####################华为单臂路由试验#############################交换机配置#########system-viewEnter system view, return user view with Ctrl+Z.[Huawei]interface GigabitEthernet0/0/1[Huawei-GigabitEthernet0/0/1]por...
华为交换机更换端口连接模式报错处理Error: Please renew the default configurations.
热门推荐
sxjk1987的专栏
09-26 2万+
[Huawei-GigabitEthernet0/0/1]port link-type hybrid Error: Please renew the default configurations. 华为交换机 变更端口link-type时报错Error: Please renew the default configurations. 需要先删除端口其他配置后再重新变更端口类型。 比如： ...
华为DHCP global
weixin_34189116的博客
04-18 442
R1关键配置如下：dhcp enableip pool 1gateway-list 10.10.100.1network 10.10.100.0 mask 255.255.255.0dns-list 10.10.10.10#ip pool 2gateway-list 10.10.200.1network 10.10.200.0 mask 255.255.25...
js中如何将2021-10-24 16:40:05转换为数字
06-02
如果你希望将 "2021-10-24 16:40:05" 转换为数字，可以使用 JavaScript 中的 Date 对象。Date 对象可以将日期字符串转换为时间戳，时间戳是一个数字，表示从 1970 年 1 月 1 日 00:00:00 UTC 到指定日期的毫秒数。 ...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值