STM32的ADC设置

最新推荐文章于 2024-07-17 15:26:50 发布

m0_61238814

最新推荐文章于 2024-07-17 15:26:50 发布

阅读量1.3k

点赞数

文章标签： stm32 单片机 arm

本文链接：https://blog.csdn.net/m0_61238814/article/details/126862547

版权

1、RCC时钟的GPIO、和ADC1

RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);

2、设置RCC的分频

RCC_ADCCLKConfig(RCC_PCLK2_Div6);

3、设置GPIO

   GPIO_InitTypeDef GPIO_InitStructure;
   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
   GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1;
   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
   GPIO_Init(GPIOA, &GPIO_InitStructure);

4、选择频道

ADC_RegularChannelConfig(ADC1, ADC_Channel_1, 1, ADC_SampleTime_55Cycles5);

5、设置ADC_Init

   ADC_InitTypeDef ADC_InitStructure;
   ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
   ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
   ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
   ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
   ADC_InitStructure.ADC_ScanConvMode = DISABLE;
   ADC_InitStructure.ADC_NbrOfChannel = 1;
   ADC_Init(ADC1, &ADC_InitStructure);

6、开启ADC供电

ADC_Cmd(ADC1, ENABLE);

7、设置ADC刷新

   ADC_ResetCalibration(ADC1);
   while (ADC_GetResetCalibrationStatus(ADC1) == SET);
   ADC_StartCalibration(ADC1);
   while (ADC_GetCalibrationStatus(ADC1) == SET);

8、ADC函数

uint16_t AD_GetValue(void)
{
   ADC_SoftwareStartConvCmd(ADC1, ENABLE);
   while (ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC) == RESET);
   return ADC_GetConversionValue(ADC1);
}