Arduino入门：使用Tinkercad网站搭建一个红绿灯。要求：绿灯亮10秒，黄灯闪烁3次(亮灭各0.5秒钟)，红灯亮10秒循环

电路连接如图所示

---

源代码如下：

---

void setup()
{
  pinMode(1, OUTPUT);//output pin 1
  pinMode(2, OUTPUT);//output pin 2
  pinMode(3, OUTPUT);//output pin 3
}

void loop()
{
  digitalWrite(2, HIGH);  //turn on the green light
  delay(10000);           // Wait for 10000 millisecond(s)
  digitalWrite(2, LOW);   //turn off the green light
  digitalWrite(3, HIGH);  //turn on the yellow light
  delay(500);             // Wait for 500 millisecond(s)
  digitalWrite(3, LOW);   //turn off the yellow light
  delay(500);             // Wait for 500 millisecond(s)
  digitalWrite(3, HIGH);   //turn on the yellow light
  delay(500);              // Wait for 500 millisecond(s)
  digitalWrite(3, LOW);    //turn off the yellow light
  delay(500);             // Wait for 500 millisecond(s)
  digitalWrite(3, HIGH);  //turn on the yellow li