如何使用rdma-core来实现RDMA操作

: · build/bin

sudo apt-get install rdma-core

lsmod | grep ib_

sudo modprobe ib_core
sudo modprobe ib_ipoib
sudo modprobe ib_uverbs

git clone https://github.com/linux-rdma/rdma-core.git
cd rdma-core

./build.sh
[![Build Status](https://dev.azure.com/ucfconsort/rdma-core/_apis/build/status/linux-rdma.rdma-core?branchName=master)](https://dev.azure.com/ucfconsort/rdma-core/_build/latest?definitionId=2&branchName=master)

# RDMA Core Userspace Libraries and Daemons

This is the userspace components for the Linux Kernel's drivers/infiniband
subsystem. Specifically this contains the userspace libraries for the
following device nodes:

 - /dev/infiniband/uverbsX (libibverbs)
 - /dev/infiniband/rdma_cm (librdmacm)
 - /dev/infiniband/umadX (libibumad)

The userspace component of the libibverbs RDMA kernel drivers are included
under the providers/ directory. Support for the following Kernel RDMA drivers
is included:

 - bnxt_re.ko
 - efa.ko
 - erdma.ko
 - iw_cxgb4.ko
 - hfi1.ko
 - hns-roce.ko
 - irdma.ko
 - ib_qib.ko
 - mana_ib.ko
 - mlx4_ib.ko
 - mlx5_ib.ko
 - ib_mthca.ko
 - ocrdma.ko
 - qedr.ko
 - rdma_rxe.ko
 - siw.ko
 - vmw_pvrdma.ko

Additional service daemons are provided for:
 - srp_daemon (ib_srp.ko)
 - iwpmd (for iwarp kernel providers)
 - ibacm (for InfiniBand communication management assistant)

# Building

This project uses a cmake based build system. Quick start:

```sh
$ bash build.sh
```

*build/bin* will contain the sample programs and *build/lib* will contain the
shared libraries. The build is configured to run all the programs 'in-place'
and cannot be installed.

### Debian Derived

```sh
$ apt-get install build-essential cmake gcc libudev-dev libnl-3-dev libnl-route-3-dev ninja-build pkg-config valgrind python3-dev cython3 python3-docutils pandoc
```

Supported releases:

* Debian 9 (stretch) or newer
* Ubuntu 16.04 LTS (xenial) or newer

### Fedora, CentOS 8

```sh
$ dnf builddep redhat/rdma-core.spec
```

NOTE: Fedora Core uses the name 'ninja-build' for the 'ninja' command.

### openSUSE

```sh
$ zypper install cmake gcc libnl3-devel libudev-devel ninja pkg-config valgrind-devel python3-devel python3-Cython python3-docutils pandoc
```

## Building on CentOS 7, Amazon Linux 2

Install required packages:

```sh
$ yum install cmake gcc libnl3-devel libudev-devel make pkgconfig valgrind-devel
```

Developers on CentOS 7 or Amazon Linux 2 are suggested to install more modern
tooling for the best experience.

CentOS 7:

```sh
$ yum install epel-release
$ yum install cmake3 ninja-build pandoc
```

Amazon Linux 2:

```sh
$ amazon-linux-extras install epel
$ yum install cmake3 ninja-build pandoc
```

NOTE: EPEL uses the name 'ninja-build' for the 'ninja' command, and 'cmake3'
for the 'cmake' command.

# Usage

To set up software RDMA on an existing interface with either of the available
drivers, use the following commands, substituting `<DRIVER>` with the name of
the driver of your choice (`rdma_rxe` or `siw`) and `<TYPE>` with the type
corresponding to the driver (`rxe` or `siw`).

```
# modprobe <DRIVER>
# rdma link add <NAME> type <TYPE> netdev <DEVICE>
```

Please note that you need version of `iproute2` recent enough is required for the
command above to work.

You can use either `ibv_devices` or `rdma link` to verify that the device was
successfully added.

# Reporting bugs

Bugs should be reported to the <linux-rdma@vger.kernel.org> mailing list
In your bug report, please include:

 * Information about your system:
   - Linux distribution and version
   - Linux kernel and version
   - InfiniBand hardware and firmware version
   - ... any other relevant information

 * How to reproduce the bug.

 * If the bug is a crash, the exact output printed out when the crash
   occurred, including any kernel messages produced.

# Submitting patches

See [Contributing to rdma-core](Documentation/contributing.md).

# Stable branches

Stable versions are released regularly with backported fixes (see Documentation/stable.md)
The current minimum version still maintained is 'v30.X'
$ bash build.sh
$ apt-get install build-essential cmake gcc libudev-dev libnl-3-dev libnl-route-3-dev ninja-build pkg-config valgrind python3-dev cython3 python3-docutils pandoc

$ dnf builddep redhat/rdma-core.spec
$ zypper install cmake gcc libnl3-devel libudev-devel ninja pkg-config valgrind-devel python3-devel python3-Cython python3-docutils pandoc

$ yum install cmake gcc libnl3-devel libudev-devel make pkgconfig valgrind-devel
$ yum install epel-release $ yum install cmake3 ninja-build pandoc
$ amazon-linux-extras install epel $ yum install cmake3 ninja-build pandoc
# modprobe <DRIVER> # rdma link add <NAME> type <TYPE> netdev <DEVICE>
doxygen Doxyfile

sudo apt-get install doxygen

doxygen -g Doxyfile
doxygen Doxyfile

如何使用rdma-core来实现RDMA操作

目录：

一、什么是rdma-core？

1.1 主要组成部分

1.2 功能特点

二、安装和使用

2.1 下载安装

2.2 源码目录结构：

2.3 编译

三、rdma-core中README详解

3.1 文档原件

3.2 原文解读

3.2.1 RDMA Core 用户空间库和守护进程

3.2.2 在 CentOS 7 和 Amazon Linux 2 上构建

四、RDMA-Core 库的功能和 API

4.1 官方文档

4.2 API 文档

4.3 构建系统

4.4 核心库和工具：

4.4.1libibverbs：

4.4.2 libibumad：

4.4.3 libmlx5：

4.4.4 librdmacm:

4.4.5 providers

五、学习示例代码

5.1 tests目录

5.2 build/bin 包含示例程序

5.3 build/lib 包含共享库

六、进行实践项目

6.1 项目目标

6.2 项目步骤

1. 环境准备

2. 编写 RDMA 服务器

3. 编写 RDMA 客户端

4. 运行项目

5. 测试和验证

6.3 项目扩展

七、 深入学习性能调优

八、 参与社区

8.1 RDMA Mailing Lists

8.2 Stack Overflow

8.3 GitHub

8.4 Reddit（可能需要VPN）

8.5 OpenFabrics Alliance (OFA)

8.5 Linux Kernel Mailing List (LKML)

8.6 RDMAmojo

8.7 RDMA Consortium

九、 参考书籍和资源

十、 实践和反馈

七、深入学习性能调优

八、参与社区

九、参考书籍和资源

十、实践和反馈