MGRE结合OSPF

topo图搭建： 

 

 

 实验要求：

1、R6为ISP只能配置IP地址，R1-R5的环回为私有网段 ；

2、R1/4/5为全连的MGRE结构，R1/2/3为星型的拓扑结构，R1为中心站点；

3、所有私有网段可以互相通讯，私有网段使用 ospf 完成。

1、基础IP配置

[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip address 66.1.1.1 24

[R1]int g0/0/1
[R1-GigabitEthernet0/0/1]ip address 16.1.1.1 24
[R1]int LoopBack 0
[R1-LoopBack0]ip address 1.1.1.1 24

[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip address 26.1.1.1 24
[R2]int LoopBack 0
[R2-LoopBack0]ip address 2.2.2.2 24

[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip address 36.1.1.1 24
[R3]int LoopBack 0
[R3-LoopBack0]ip address 3.3.3.3 24

[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip address 46.1.1.1 24
[R4]int LoopBack 0
[R4-LoopBack0]ip address 4.4.4.4 24

[R5]int g0/0/0
[R5-GigabitEthernet0/0/0]ip address 56.1.1.1 24
[R5]int LoopBack 0
[R5-LoopBack0]ip address 5.5.5.5 24

[R6]int g0/0/0
[R6-GigabitEthernet0/0/0]ip address 66.1.1.2 24

[R6]int g0/0/1
[R6-GigabitEthernet0/0/1]ip address 16.1.1.2 24

[R6]int g2/0/0
[R6-GigabitEthernet2/0/0]ip address 26.1.1.2 24

[R6]int g3/0/0
[R6-GigabitEthernet3/0/0]ip address 36.1.1.2 24

[R6]int g4/0/0
[R6-GigabitEthernet4/0/0]ip address 46.1.1.2 24

[R6]int g0/0/2
[R6-GigabitEthernet0/0/2]ip address 56.1.1.2 24

[R6]int LoopBack 0
[R6-LoopBack0]ip address 6.6.6.6 24

2、配置缺省路由

[R1]ip route-static 0.0.0.0 0 16.1.1.2
[R1]ip route-static 0.0.0.0 0 66.1.1.2

[R2]ip route-static 0.0.0.0 0 26.1.1.2

[R3]ip route-static 0.0.0.0 0 36.1.1.2

[R4]ip route-static 0.0.0.0 0 46.1.1.2

[R5]ip route-static 0.0.0.0 0 56.1.1.2

3、星型拓扑结构 

[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip address 192.168.4.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 16.1.1.1
[R1-Tunnel0/0/0]nhrp entry multicast dynamic

[R2]int Tunnel 0/0/0
[R2-Tunnel0/0/0]ip address 192.168.4.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp
[R2-Tunnel0/0/0]source g0/0/0
[R2-Tunnel0/0/0]nhrp entry 192.168.4.1 16.1.1.1 register

[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]ip address 192.168.4.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp
[R3-Tunnel0/0/0]source g0/0/0
[R3-Tunnel0/0/0]nhrp entry 192.168.4.1 16.1.1.1 register

4、MGRE全连

[R1]int Tunnel 0/0/1
[R1-Tunnel0/0/1]ip address 192.168.5.3 24
[R1-Tunnel0/0/1]tunnel-protocol gre p2mp
[R1-Tunnel0/0/1]source 66.1.1.1
[R1-Tunnel0/0/1]nhrp entry multicast dynamic
[R1-Tunnel0/0/1]nhrp entry 192.168.5.1 46.1.1.1 register
[R1-Tunnel0/0/1]nhrp entry 192.168.5.2 56.1.1.1 register

[R4]int Tunnel 0/0/1
[R4-Tunnel0/0/1]ip address 192.168.5.1 24
[R4-Tunnel0/0/1]tunnel-protocol gre p2mp
[R4-Tunnel0/0/1]source 46.1.1.1
[R4-Tunnel0/0/1]nhrp entry multicast dynamic
[R4-Tunnel0/0/1]nhrp entry 192.168.5.2 56.1.1.1 register
[R4-Tunnel0/0/1]nhrp entry 192.168.5.3 66.1.1.1 register

[R5]int Tunnel 0/0/1
[R5-Tunnel0/0/1]ip address 192.168.5.2 24
[R5-Tunnel0/0/1]tunnel-protocol gre p2mp
[R5-Tunnel0/0/1]source 56.1.1.1
[R5-Tunnel0/0/1]nhrp entry multicast dynamic
[R5-Tunnel0/0/1]nhrp entry 192.168.5.1 46.1.1.1 register
[R5-Tunnel0/0/1]nhrp entry 192.168.5.3 66.1.1.1 register

5、OSPF配置 

[R1]ospf 1 router-id 1.1.1.1
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]network 192.168.5.3 0.0.0.0
[R1-ospf-1-area-0.0.0.0]network 192.168.4.1 0.0.0.0
[R1-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.0

[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
[R2-ospf-1-area-0.0.0.0]network 192.168.4.2 0.0.0.0
[R2]int Tunnel 0/0/0
[R2-Tunnel0/0/0]ospf network-type broadcast
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ospf dr-priority 0

[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.0
[R3-ospf-1-area-0.0.0.0]network 192.168.5.2 0.0.0.0
[R3-ospf-1-area-0.0.0.0]network 192.168.4.3 0.0.0.0
[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]ospf network-type broadcast
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ospf dr-priority 0

[R4]ospf 1 router-id 4.4.4.4
[R4-ospf-1]area 0
[R4-ospf-1-area-0.0.0.0]network 4.4.4.4 0.0.0.0
[R4-ospf-1-area-0.0.0.0]network 192.168.5.1 0.0.0.0
[R4]int Tunnel 0/0/1
[R4-Tunnel0/0/1]ospf network-type broadcast

[R5]ospf 1 router-id 5.5.5.5
[R5-ospf-1]area 0
[R5-ospf-1-area-0.0.0.0]network 5.5.5.5 0.0.0.0
[R5-ospf-1-area-0.0.0.0]network 192.168.5.2 0.0.0.0
[R5]int Tunnel 0/0/1
[R5-Tunnel0/0/1]ospf network-type broadcast

 

测试 : 

……