一、题目
二、步骤分析
- R6为ISP只能配置IP地址,R1-R5的环回为私有网段
- R1/R4/R5为全连的MGRE结构,R1/R2/R3星型的拓扑结构,R1为中心站点
- 所有私有网段可以互相通讯,私有网段使用OSPF完成
1.R1/4/5为全连的MGRE结构,R1/2/3为星型的拓扑结构,R1为中心站点
R1/4/5为全连的MGRE结构
2.network实现所有私有网段可以互相通讯,私有网段使用OSPF完成
三、实验步骤
以R1为例,实现接口的创建和连接
配置缺省路由:
[R1]ip route-static 0.0.0.0 0 16.0.0.2
[R1]ip route-static 0.0.0.0 0 116.0.0.2
[R2]ip route-static 0.0.0.0 0 26.0.0.2
[R3]ip route-static 0.0.0.0 0 36.0.0.2
[R4]ip route-static 0.0.0.0 0 46.0.0.2
[R5]ip route-static 0.0.0.0 0 56.0.0.2
第二步:R1/4/5为全连的MGRE结构,R1/2/3为星型的拓扑结构,R1为中心站点
R1/4/5为全连的MGRE结构
[R1]int t0/0/1
[R1-Tunnel0/0/1]ip add 11.0.0.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre p2mp
[R1-Tunnel0/0/1]source 116.0.0.1
[R1-Tunnel0/0/1]
[R1-Tunnel0/0/1]nhrp network-id 110
[R1-Tunnel0/0/1