华为ENSP模拟实验----VLAN综合实验

一，前言

给定拓扑

要求：

PC1和PC3所在接口为access;属于 vlan2:PC2/4/5/6处于同一网段;其中pc2可以访问Pc4/5/6;但PC4可以访问Pc5，不能访问Pc62 Pc5不能访问Pc6
PC1/3与PC2/4/5/6不在同一个网段
所有Pc通过DHCP获取IP地址，且Pc1/3可以正常访问Pc2/4/5/6

二，实验步骤

配置交换机

<Huawei>sy
[Huawei]sys SW1
[SW1]vlan batch 2 to 6
[SW1]port-group group-member GigabitEthernet 0/0/1
[SW1-port-group]port link-type access 
[SW1-GigabitEthernet0/0/1]port link-type access 
[SW1-port-group]port default vlan 2
[SW1-GigabitEthernet0/0/1]port default vlan 2
[SW1-port-group]q
[SW1]int g0/0/2
[SW1-GigabitEthernet0/0/2]port hybrid pvid  vlan 3
[SW1-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 6

<Huawei>SY
[Huawei]SYS SW2
[SW2]vlan batch 2 to 6
[SW2]port-group group-member GigabitEthernet 0/0/1
[SW2-port-group]port link-type access 
[SW2-GigabitEthernet0/0/1]port link-type access 
[SW2-port-group]port default vlan 2
[SW2-GigabitEthernet0/0/1]port default vlan 2
[SW2-port-group]q
[SW2]int g0/0/2
[SW2-GigabitEthernet0/0/2]port hybrid pvid  vlan 4 
[SW2-GigabitEthernet0/0/2]port hybrid untagged  vlan  3 to 4

<Huawei>SY
[Huawei]SYS SW3
[SW3]vlan batch 2 to 6
[SW3]int g0/0/1
[SW3-GigabitEthernet0/0/1]port hybrid pvid vlan 5
[SW3-GigabitEthernet0/0/1]port hybrid untagged vlan 3 5 
[SW3-GigabitEthernet0/0/1]q
[SW3]int g0/0/2
[SW3-GigabitEthernet0/0/2]port hybrid pvid vlan 6
[SW3-GigabitEthernet0/0/2]port hybrid untagged vlan 3 6

配置turk干道

[SW1]int g0/0/3
[SW1-GigabitEthernet0/0/3]port link-type trunk
[SW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6

[SW2]int g0/0/3
[SW2-GigabitEthernet0/0/3]port link-type trunk 
[SW2-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6
[SW2-GigabitEthernet0/0/3]q
[SW2]int g0/0/4
[SW2-GigabitEthernet0/0/4]port link-type trunk 
[SW2-GigabitEthernet0/0/4]port trunk allow-pass vlan 2 to 6

[SW3]int g0/0/3
[SW3-GigabitEthernet0/0/3]port hybrid tagged vlan 2 to 6

[SW1]int g0/0/4
[SW1-GigabitEthernet0/0/4]port hybrid tagged vlan 2
[SW1-GigabitEthernet0/0/4]port hybrid  untagged vlan 3 to 6

配置路由器

<Huawei>SY
[Huawei]SYS R1
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
[R1-GigabitEthernet0/0/0]q
[R1]int g0/0/0.1
[R1-GigabitEthernet0/0/0.1]dot1q termination vid 2
[R1-GigabitEthernet0/0/0.1]ip add 192.168.2.1 24
[R1-GigabitEthernet0/0/0.1]q
[R1]dhcp enable 
[R1]ip pool v2
[R1-ip-pool-v2]network 192.168.2.0 mask 24
[R1-ip-pool-v2]gateway-list 192.168.2.1
[R1-ip-pool-v2]q
[R1]ip pool v3-v6
[R1-ip-pool-v3-v6]network 192.168.1.0 mask 24
[R1-ip-pool-v3-v6]gateway-list  192.168.1.1
[R1-ip-pool-v3-v6]q
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]dhcp select global 
[R1-GigabitEthernet0/0/0]q
[R1]int g0/0/0.1
[R1-GigabitEthernet0/0/0.1]dhcp select global 
[R1-GigabitEthernet0/0/0.1]arp broadcast enable 

给每台PC开启DHCP服务

三，实验结果

pc2访问Pc4/5/6

Pc5不能访问Pc6