一、启动流程
整体代码
AbstractApplicationContext.refresh为Spring IOC容器启动整个逻辑。refresh刷新意味Spring 可以在运行时刷新BeanFactory,那么我们不需要重启应用去更新容器。
@Override
public void refresh() throws BeansException, IllegalStateException {
//1、加锁避免同时关闭或者启动以及线程安全问题
synchronized (this.startupShutdownMonitor) {
// Prepare this context for refreshing. 准备刷新
prepareRefresh();
// Tell the subclass to refresh the internal bean factory.
ConfigurableListableBeanFactory beanFactory = obtainFreshBeanFactory();
// Prepare the bean factory for use in this context.
prepareBeanFactory(beanFactory);
try {
// Allows post-processing of the bean factory in context subclasses.
postProcessBeanFactory(beanFactory);
// Invoke factory processors registered as beans in the context.
invokeBeanFactoryPostProcessors(beanFactory);
// Register bean processors that intercept bean creation.
registerBeanPostProcessors(beanFactory);
// Initialize message source for this context.
initMessageSource();
// Initialize event multicaster for this context.
initApplicationEventMulticaster();
// Initialize other special beans in specific context subclasses.
onRefresh();
// Check for listener beans and register them.
registerListeners();
// Instantiate all remaining (non-lazy-init) singletons.
finishBeanFactoryInitialization(beanFactory);
// Last step: publish corresponding event.
finishRefresh();
}
catch (BeansException ex) {
if (logger.isWarnEnabled()) {
logger.warn("Exception encountered during context initialization - " +
"cancelling refresh attempt: " + ex);
}
// Destroy already created singletons to avoid dangling resources.
destroyBeans();
// Reset 'active' flag.
cancelRefresh(ex);
// Propagate exception to caller.
throw ex;
}
finally {
// Reset common introspection caches in Spring's core, since we
// might not ever need metadata for singleton beans anymore...
resetCommonCaches();
}
}
}
复制代码流程分析
1、prepareRefresh-预刷新-PropertySource
刷新前的准备，设置以及active状态，最重要的是初始化PropertySource（子类按需初始化一些属性值）,然后校验必须的配置属性时可以解析的。
2、obtainFreshBeanFactory-获得刷新后Beanfactory
通知子类刷新Beanfactory并获取刷新后的，子类分两种实现一种是每次刷新重新创建Beanfactory,还有一种是不做任何处理仅仅只设置下状态,分别对应可刷新刷新下文-AbstractRefreshableApplicationContext和GenericApplicationContext.
protected ConfigurableListableBeanFactory obtainFreshBeanFactory() {
//刷新Beanfactory
refreshBeanFactory();
//返回当前BeanFactory
return getBeanFactory();
}
复制代码GenericApplicationContext
与为每次刷新创建新的内部 BeanFactory 实例的其他 ApplicationContext 实现相比，此上下文的内部BeanFactory 从一开始就可用，以便能够在其上注册 BeanDefinition。 refresh()只能被调用一次。内嵌的BeanFactory是DefaultListableBeanFactory。
@Override
protected final void refreshBeanFactory() throws IllegalStateException {
if (!this.refreshed.compareAndSet(false, true)) {
throw new IllegalStateException(
"GenericApplicationContext does not support multiple refresh attempts: just call 'refresh' once");
}
this.beanFactory.setSerializationId(getId());
}
//内嵌的BeanFactory
private final DefaultListableBeanFactory beanFactory;
复制代码AbstractRefreshableApplicationContext
每次刷新都会创建创建一个BeanFactory。注意重新重新创建BeanFactory为**DefaultListableBeanFactory**！！！
//刷新BeanFactory
protected final void refreshBeanFactory() throws BeansException {
//存在则销毁
if (hasBeanFactory()) {
destroyBeans();
closeBeanFactory();
}
try {
//创建新beanFactory
DefaultListableBeanFactory beanFactory = createBeanFactory();
beanFactory.setSerializationId(getId());
//配置`Beanfactory`
customizeBeanFactory(beanFactory);
//BeanDefinition
loadBeanDefinitions(beanFactory);
//更新引用
this.beanFactory = beanFactory;
}
catch (IOException ex) {
throw new ApplicationContextException("I/O error parsing bean definition source for " + getDisplayName(), ex);
}
}
复制代码-
判断
Beanfactory是否存在，存在则销毁Bean和关闭Beanfactory -
创建新的
Beanfactory实际上是创建**
DefaultListableBeanFactory**，参数是获取当前ParentBeanFactory,Spring IOC 的层次获取Beanprotected DefaultListableBeanFactory createBeanFactory() { return new DefaultListableBeanFactory(getInternalParentBeanFactory()); } 复制代码 -
配置
Beanfactory配置了是否允许Beandefinition重写和是否允许循环引用
protected void customizeBeanFactory(DefaultListableBeanFactory beanFactory) { if (this.allowBeanDefinitionOverriding != null) { beanFactory.setAllowBeanDefinitionOverriding(this.allowBeanDefinitionOverriding); } if (this.allowCircularReferences != null) { beanFactory.setAllowCircularReferences(this.allowCircularReferences); } } 复制代码 -
加载
BeanDefinition最重要的一步，根据不同子类（不同的
ApplicationContext）读取Bean的配置元数据以加载BeanDefinition，钩子函数同于创建BeanFactory后根据不同应用上下去加载BeanDefinitions。加载的BeanDefinition注册进(registerBeanDefinition)beanDefinitionMap(ConcurrentHashMap)根据元数据配置类型主要分以下4中：
/**
* Load bean definitions into the given bean factory, typically through
* delegating to one or more bean definition readers.
*/
protected abstract void loadBeanDefinitions(DefaultListableBeanFactory beanFactory)
throws BeansException, IOException;
//DefaultListableBeanFactory
private final Map<String, BeanDefinition> beanDefinitionMap = new ConcurrentHashMap<>(256);
复制代码-
AbstractXmlApplicationContext:基于XMl配置元数据的上下文，针对不同类型的路径有FileSystemXmlApplicationContext:文件系统中XML配置ClassPathXmlApplicationContext:classPath下XMl配置 -
AnnotationConfigWebApplicationContext:基于Java注解的配置元数据，也是最常用的。 -
GroovyWebApplicationContext:基于Groovy的Web上下文 -
XmlWebApplicationContext:基于XML的web上下文
3、prepareBeanFactory-预设置Beanfactory的标准配置
配置BeanFactory中一些标准配置也是基础配置，如注册环境相关的Bean、ApplicationContextAwareProcessor等等。
还有排除一些Aware接口的自动装配因为一些Aware接口中的方法是setxxx开头，所以需要排除。
4、postProcessBeanFactory-Bean工厂的前置处理
用于在Beanfactory创建后的回调,可能需要根据**不同应用上下文（即不同的子类）**对创建后的Beanfactory进行设置。此时BeanDefinition已经加载完毕，但是bean还未创建，这允许在某些 ApplicationContext 实现中注册特殊的 BeanPostProcessors等
5、invokeBeanFactoryPostProcessors-执行BeanFactory后置处理器
Spring 预留的扩展点，BeanFactoryPostProcessor允许我们对已经加载的BeanDefinition进行修改或者添加新的BeanDefinition。非常重要的扩展点,例如:
（1）配置类解析-ConfigurationClassPostProcessor
ConfigurationClassPostProcessor完成配置类解析和注册像@ComponentScan、@Import、@Bean、@ImportSource导入xml配置文件、@PropertySource-导入properties文件、ImportSelector（Spring Boot的自动装配就是注册一个ImportSelector）等等这些功能都是在这里实现的。以下为配置解析的代码：
protected final SourceClass doProcessConfigurationClass(
ConfigurationClass configClass, SourceClass sourceClass, Predicate<String> filter)
throws IOException {
if (configClass.getMetadata().isAnnotated(Component.class.getName())) {
// Recursively process any member (nested) classes first
processMemberClasses(configClass, sourceClass, filter);
}
// Process any @PropertySource annotations 解析@PropertySource
for (AnnotationAttributes propertySource : AnnotationConfigUtils.attributesForRepeatable(
sourceClass.getMetadata(), PropertySources.class,
org.springframework.context.annotation.PropertySource.class)) {
if (this.environment instanceof ConfigurableEnvironment) {
processPropertySource(propertySource);
}
//省略日志打印
}
// Process any @ComponentScan annotations 组件扫描
Set<AnnotationAttributes> componentScans = AnnotationConfigUtils.attributesForRepeatable(
sourceClass.getMetadata(), ComponentScans.class, ComponentScan.class);
if (!componentScans.isEmpty() &&
!this.conditionEvaluator.shouldSkip(sourceClass.getMetadata(), ConfigurationPhase.REGISTER_BEAN)) {
for (AnnotationAttributes componentScan : componentScans) {
// The config class is annotated with @ComponentScan -> perform the scan immediately
Set<BeanDefinitionHolder> scannedBeanDefinitions =
this.componentScanParser.parse(componentScan, sourceClass.getMetadata().getClassName());
// Check the set of scanned definitions for any further config classes and parse recursively if needed
for (BeanDefinitionHolder holder : scannedBeanDefinitions) {
BeanDefinition bdCand = holder.getBeanDefinition().getOriginatingBeanDefinition();
if (bdCand == null) {
bdCand = holder.getBeanDefinition();
}
if (ConfigurationClassUtils.checkConfigurationClassCandidate(bdCand, this.metadataReaderFactory)) {
parse(bdCand.getBeanClassName(), holder.getBeanName());
}
}
}
}
// Process any @Import annotations @Import注解
processImports(configClass, sourceClass, getImports(sourceClass), filter, true);
// Process any @ImportResource annotations @ImportResource导入的xml配置文件
AnnotationAttributes importResource =
AnnotationConfigUtils.attributesFor(sourceClass.getMetadata(), ImportResource.class);
if (importResource != null) {
String[] resources = importResource.getStringArray("locations");
Class<? extends BeanDefinitionReader> readerClass = importResource.getClass("reader");
for (String resource : resources) {
String resolvedResource = this.environment.resolveRequiredPlaceholders(resource);
configClass.addImportedResource(resolvedResource, readerClass);
}
}
// Process individual @Bean methods @Bean方法
Set<MethodMetadata> beanMethods = retrieveBeanMethodMetadata(sourceClass);
for (MethodMetadata methodMetadata : beanMethods) {
configClass.addBeanMethod(new BeanMethod(methodMetadata, configClass));
}
// Process default methods on interfaces
processInterfaces(configClass, sourceClass);
// Process superclass, if any
if (sourceClass.getMetadata().hasSuperClass()) {
String superclass = sourceClass.getMetadata().getSuperClassName();
if (superclass != null && !superclass.startsWith("java") &&
!this.knownSuperclasses.containsKey(superclass)) {
this.knownSuperclasses.put(superclass, configClass);
// Superclass found, return its annotation metadata and recurse
return sourceClass.getSuperClass();
}
}
// No superclass -> processing is complete
return null;
}
复制代码（2）BeanFactory后置处理器的SPI 扩展:BeanDefinitionRegistryPostProcessor
对标准BeanFactoryPostProcessor SPI 扩展，允许在常规 BeanFactoryPostProcessor 检测开始之前注册进一步的 bean 定义。特别是，BeanDefinitionRegistryPostProcessor 可以注册进一步的 bean 定义，这些定义反过来定义 BeanFactoryPostProcessor 实例。
6、registerBeanPostProcessors-注册Bean后置处理器
BeanPostProcessor是在Bean初始化前后触发进行扩展，所以在实例化bean之前需要注册BeanPostProcessor（完成Bean后置器的初始化）。
7、initMessageSource-初始化消息资源
初始化消息资源例如i18n(国际化)
8、initApplicationEventMulticaster-初始化事件广播器
初始化事件广播器以广播事件。默认情况下是SimpleApplicationEventMulticaster且所有侦听器都在调用线程中调用。这允许恶意侦听器阻塞整个应用程序的危险，但增加了最小的开销。可以指定一个替代任务执行器，让侦听器在不同的线程中执行，例如从线程池中执行。所以利用Spring事件机制来初始化一个资源的适合建议不要太久（因为会阻塞刷新流程）。
ps：之前犯过一个错误，由于HDFSClient在初始化的时候一旦连不上就会不断重试非常耗时（而且不会错误提示），而这个初始化逻辑是放在@PostConstruct导致本地在测试其他代码的时候启动巨慢，所以改成事件机制在收到ContextRefreshedEvent后初始化，但是发现还是很慢，然后才发现默认情况下是由刷新线程的来广播的。所以之后改成线程池了。
9、onRefresh-钩子函数
钩子函数表示Beanfactory正在刷新中，用于在实例化单例Bean之前处理化一些特殊的Bean。允许子类处理一些特殊的Bean的初始化。
10、registerListeners-注册Listener
注册监听器相关的Bean，用于处理广播器中的事件
11、finishBeanFactoryInitialization-单例Bean实例化
BeanFactory初始化-实例化所有的单例非延迟加载的Bean。Bean生命周期也体现在里面。实际上所有Bean的创建**都是通过getBean**去创建的。
- 初始化conversion service
- 注册默认的EmbeddedValueResolver
- 初始化LoadTimeWeaverAware Bean
- 初始化所有的非懒加载单例Bean
//DefaultListableBeanFactory类中
protected void finishBeanFactoryInitialization(ConfigurableListableBeanFactory beanFactory) {
// Initialize conversion service for this context.
if (beanFactory.containsBean(CONVERSION_SERVICE_BEAN_NAME) &&
beanFactory.isTypeMatch(CONVERSION_SERVICE_BEAN_NAME, ConversionService.class)) {
beanFactory.setConversionService(
beanFactory.getBean(CONVERSION_SERVICE_BEAN_NAME, ConversionService.class));
}
// Register a default embedded value resolver if no bean post-processor
// (such as a PropertyPlaceholderConfigurer bean) registered any before:
// at this point, primarily for resolution in annotation attribute values.
if (!beanFactory.hasEmbeddedValueResolver()) {
beanFactory.addEmbeddedValueResolver(strVal -> getEnvironment().resolvePlaceholders(strVal));
}
// Initialize LoadTimeWeaverAware beans early to allow for registering their transformers early.
String[] weaverAwareNames = beanFactory.getBeanNamesForType(LoadTimeWeaverAware.class, false, false);
for (String weaverAwareName : weaverAwareNames) {
getBean(weaverAwareName);
}
// Stop using the temporary ClassLoader for type matching.
beanFactory.setTempClassLoader(null);
// Allow for caching all bean definition metadata, not expecting further changes.
beanFactory.freezeConfiguration();
// Instantiate all remaining (non-lazy-init) singletons.
beanFactory.preInstantiateSingletons();
}
复制代码（1）初始化所有非懒加载的单例Bean
在DefaultListableBeanFactory中（也就是创建BeanFactory）中实现了该方法。遍历所有的Bean名称 通过getBean方法去创建哪些单例非懒加载的Bean。
@Override
public void preInstantiateSingletons() throws BeansException {
//日志打印
// Iterate over a copy to allow for init methods which in turn register new bean definitions.
// While this may not be part of the regular factory bootstrap, it does otherwise work fine.
List<String> beanNames = new ArrayList<>(this.beanDefinitionNames);
// Trigger initialization of all non-lazy singleton beans... 遍历所有的beanName
for (String beanName : beanNames) {
//获取合并的BeanDefinition MergedBeanDefinition？？？
RootBeanDefinition bd = getMergedLocalBeanDefinition(beanName);
//是单例非懒加载非抽象
if (!bd.isAbstract() && bd.isSingleton() && !bd.isLazyInit()) {
if (isFactoryBean(beanName)) {
//先尝试获取其FactoryBean
Object bean = getBean(FACTORY_BEAN_PREFIX + beanName);
if (bean instanceof FactoryBean) {
FactoryBean<?> factory = (FactoryBean<?>) bean;
boolean isEagerInit;
if (System.getSecurityManager() != null && factory instanceof SmartFactoryBean) {
isEagerInit = AccessController.doPrivileged(
(PrivilegedAction<Boolean>) ((SmartFactoryBean<?>) factory)::isEagerInit,
getAccessControlContext());
}
else {
isEagerInit = (factory instanceof SmartFactoryBean &&
((SmartFactoryBean<?>) factory).isEagerInit());
}
//如果是优先innit??
if (isEagerInit) {
getBean(beanName);
}
}
}
else {
//非FactoryBean直接创建Bean
getBean(beanName);
}
}
}
// Trigger post-initialization callback for all applicable beans... 触发特殊的后置SmartInitializingSingleton
for (String beanName : beanNames) {
//从单例池种获取
Object singletonInstance = getSingleton(beanName);
//如果是SmartInitializingSingleton 则执行后置
if (singletonInstance instanceof SmartInitializingSingleton) {
SmartInitializingSingleton smartSingleton = (SmartInitializingSingleton) singletonInstance;
if (System.getSecurityManager() != null) {
AccessController.doPrivileged((PrivilegedAction<Object>) () -> {
smartSingleton.afterSingletonsInstantiated();
return null;
}, getAccessControlContext());
}
else {
smartSingleton.afterSingletonsInstantiated();
}
}
}
}
复制代码doGetBean-获取Bean
大体是先从缓存中获取，获取不到再判断是否交给父BeanFactory去获取，再根据不同的Scope从不同的地方获取Bean，获取不到则创建新的Bean（createBean方法），当然前提时BeanDefinition存在。
-
单例
先getSingleton（缓存），获取不到则创建
-
原型
直接CreateBean
-
其他
先从对应
Scope中获取，获取不到则createBean
//AbstractBeanFactory中的getBean方法都是直接去创建Bean
public Object getBean(String name) throws BeansException {
return doGetBean(name, null, null, false);
}
protected <T> T doGetBean(String name, @Nullable Class<T> requiredType, @Nullable Object[] args, boolean typeCheckOnly)
throws BeansException {
//转化Bean名称 例如Bean的别名 FactoryBean的前缀等等
String beanName = transformedBeanName(name);
Object bean;
// Eagerly check singleton cache for manually registered singletons. 获取单例Bean
Object sharedInstance = getSingleton(beanName);
if (sharedInstance != null && args == null) {
//日志省略
bean = getObjectForBeanInstance(sharedInstance, name, beanName, null);
}
else {
// 原型循环依赖无法处理 原型Bean没有缓存因为每次获取都是新的
if (isPrototypeCurrentlyInCreation(beanName)) {
throw new BeanCurrentlyInCreationException(beanName);
}
// 双亲委派模型 当当前上下文不存在BeanDefinition交给父BeanFactory去创建
BeanFactory parentBeanFactory = getParentBeanFactory();
if (parentBeanFactory != null && !containsBeanDefinition(beanName)) {
// Not found -> check parent.
String nameToLookup = originalBeanName(name);
if (parentBeanFactory instanceof AbstractBeanFactory) {
return ((AbstractBeanFactory) parentBeanFactory).doGetBean(nameToLookup, requiredType, args, typeCheckOnly);
}
else if (args != null) {
// Delegation to parent with explicit args.
return (T) parentBeanFactory.getBean(nameToLookup, args);
}
else if (requiredType != null) {
// No args -> delegate to standard getBean method.
return parentBeanFactory.getBean(nameToLookup, requiredType);
}
else {
return (T) parentBeanFactory.getBean(nameToLookup);
}
}
//以上是类型检查（是否存在）
if (!typeCheckOnly) {
//标记Bean已经创建
markBeanAsCreated(beanName);
}
try {
//获取合并的BeanDefinition 合并为什么
RootBeanDefinition mbd = getMergedLocalBeanDefinition(beanName);
checkMergedBeanDefinition(mbd, beanName, args);
// Guarantee initialization of beans that the current bean depends on.
String[] dependsOn = mbd.getDependsOn();
//创建其前置Bean(dependsOn)
if (dependsOn != null) {
for (String dep : dependsOn) {
if (isDependent(beanName, dep)) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName,
"Circular depends-on relationship between '" + beanName + "' and '" + dep + "'");
}
registerDependentBean(dep, beanName);
try {
getBean(dep);
}
catch (NoSuchBeanDefinitionException ex) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName,
"'" + beanName + "' depends on missing bean '" + dep + "'", ex);
}
}
}
// Create bean instance. 是单例
if (mbd.isSingleton()) {
//从缓存获取 获取不到则创建Bean
sharedInstance = getSingleton(beanName, () -> {
try {
return createBean(beanName, mbd, args);
}
catch (BeansException ex) {
// Explicitly remove instance from singleton cache: It might have been put there
// eagerly by the creation process, to allow for circular reference resolution.
// Also remove any beans that received a temporary reference to the bean.
destroySingleton(beanName);
throw ex;
}
});
//从获取的缓存中获取
bean = getObjectForBeanInstance(sharedInstance, name, beanName, mbd);
}
//原型Bean
else if (mbd.isPrototype()) {
// It's a prototype -> create a new instance.
Object prototypeInstance = null;
try {
beforePrototypeCreation(beanName);
//每次创建新的
prototypeInstance = createBean(beanName, mbd, args);
}
finally {
afterPrototypeCreation(beanName);
}
bean = getObjectForBeanInstance(prototypeInstance, name, beanName, mbd);
}
else {
//其他Scope 从对应的Scope中获取，获取不到在创建
String scopeName = mbd.getScope();
if (!StringUtils.hasLength(scopeName)) {
throw new IllegalStateException("No scope name defined for bean ´" + beanName + "'");
}
Scope scope = this.scopes.get(scopeName);
if (scope == null) {
throw new IllegalStateException("No Scope registered for scope name '" + scopeName + "'");
}
try {
Object scopedInstance = scope.get(beanName, () -> {
beforePrototypeCreation(beanName);
try {
return createBean(beanName, mbd, args);
}
finally {
afterPrototypeCreation(beanName);
}
});
bean = getObjectForBeanInstance(scopedInstance, name, beanName, mbd);
}
catch (IllegalStateException ex) {
throw new BeanCreationException(beanName,
"Scope '" + scopeName + "' is not active for the current thread; consider " +
"defining a scoped proxy for this bean if you intend to refer to it from a singleton",
ex);
}
}
}
catch (BeansException ex) {
cleanupAfterBeanCreationFailure(beanName);
throw ex;
}
}
// Check if required type matches the type of the actual bean instance.
if (requiredType != null && !requiredType.isInstance(bean)) {
try {
T convertedBean = getTypeConverter().convertIfNecessary(bean, requiredType);
if (convertedBean == null) {
throw new BeanNotOfRequiredTypeException(name, requiredType, bean.getClass());
}
return convertedBean;
}
catch (TypeMismatchException ex) {
if (logger.isTraceEnabled()) {
logger.trace("Failed to convert bean '" + name + "' to required type '" +
ClassUtils.getQualifiedName(requiredType) + "'", ex);
}
throw new BeanNotOfRequiredTypeException(name, requiredType, bean.getClass());
}
}
return (T) bean;
复制代码12、finishRefresh
刷新完成，发布Beanfactory创建完成事件
protected void finishRefresh() {
// Clear context-level resource caches (such as ASM metadata from scanning).
clearResourceCaches();
// Initialize lifecycle processor for this context.
initLifecycleProcessor();
// Propagate refresh to lifecycle processor first.
getLifecycleProcessor().onRefresh();
// Publish the final event. 发布上下文刷新完成时间
publishEvent(new ContextRefreshedEvent(this));
// Participate in LiveBeansView MBean, if active.
LiveBeansView.registerApplicationContext(this);
}
复制代码二、Bean生命周期
大体生命周期可分为4大步骤：实例化（1）、属性填充（2）、初始化（316）、销毁（1719），具体的生命周期如下：
创建时：
-
Bean实例化
-
填充属性值
-
BeanNameAware的setBeanName -
BeanClassLoaderAware的setBeanClassLoader -
BeanFactoryAware的setBeanFactory -
EnvironmentAware的setEnvironment -
EmbeddedValueResolverAware的setEmbeddedValueResolver -
ResourceLoaderAware的setResourceLoader（仅在在应用程序上下文中运行时适用） -
ApplicationEventPublisherAware的setApplicationEventPublisher（仅适用于在应用程序上下文中运行的情况） -
MessageSourceAware的setMessageSource（仅适用于在应用程序上下文中运行的情况） -
ApplicationContextAware的setApplicationContext（仅适用于在应用程序上下文中运行的情况） -
ServletContextAware的setServletContext（仅适用于在Web应用程序上下文中运行的情况） -
BeanPostProcessors的postProcessBeforeInitialization：bean后置处理器的前置处理这里面还有对@PostConstruct注解的处理
-
InitializingBean的afterPropertiesSet -
自定义的初始化方法
-
BeanPostProcessors的postProcessAfterInitialization：bean后置处理器的后置处理在关闭bean工厂时，以下生命周期方法：
-
DestructionAwareBeanPostProcessors的postProcessBeforeDestruction方法例如@PreDestroy
-
DisposableBean的destroy方法 -
自定义销毁方法
整体代码
根据源码定位到Bean的创建代码为AbstractAutowireCapableBeanFactory.createBean。
@Override
protected Object createBean(String beanName, RootBeanDefinition mbd, @Nullable Object[] args)throws BeanCreationException {
RootBeanDefinition mbdToUse = mbd;
// Make sure bean class is actually resolved at this point, and
// clone the bean definition in case of a dynamically resolved Class
// which cannot be stored in the shared merged bean definition.
Class<?> resolvedClass = resolveBeanClass(mbd, beanName);
if (resolvedClass != null && !mbd.hasBeanClass() && mbd.getBeanClassName() != null) {
mbdToUse = new RootBeanDefinition(mbd);
mbdToUse.setBeanClass(resolvedClass);
}
// Prepare method overrides.
try {
mbdToUse.prepareMethodOverrides();
}//异常处理
try {
// Give BeanPostProcessors a chance to return a proxy instead of the target bean instance.
//1、一些特殊Bean后置处理器的前置处理 在实例化前调用
Object bean = resolveBeforeInstantiation(beanName, mbdToUse);
if (bean != null) {
return bean;
}
}//异常处理
try {
//实际创建Bean
Object beanInstance = doCreateBean(beanName, mbdToUse, args);
if (logger.isTraceEnabled()) {
logger.trace("Finished creating instance of bean '" + beanName + "'");
}
return beanInstance;
}//异常处理
}
//正常创建Bean的具体逻辑
protected Object doCreateBean(String beanName, RootBeanDefinition mbd, @Nullable Object[] args)
throws BeanCreationException {
// Instantiate the bean.
BeanWrapper instanceWrapper = null;
if (mbd.isSingleton()) {
instanceWrapper = this.factoryBeanInstanceCache.remove(beanName);
}
if (instanceWrapper == null) {
//2、（1）创建实例
instanceWrapper = createBeanInstance(beanName, mbd, args);
}
Object bean = instanceWrapper.getWrappedInstance();
Class<?> beanType = instanceWrapper.getWrappedClass();
if (beanType != NullBean.class) {
mbd.resolvedTargetType = beanType;
}
// Allow post-processors to modify the merged bean definition.
//3、执行MergedBeanDefinitionPostProcessor后置处理器 在初始化之前
synchronized (mbd.postProcessingLock) {
if (!mbd.postProcessed) {
try {
applyMergedBeanDefinitionPostProcessors(mbd, beanType, beanName);
}
catch (Throwable ex) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName,
"Post-processing of merged bean definition failed", ex);
}
mbd.postProcessed = true;
}
}
// Eagerly cache singletons to be able to resolve circular references
// even when triggered by lifecycle interfaces like BeanFactoryAware.
boolean earlySingletonExposure = (mbd.isSingleton() && this.allowCircularReferences &&
isSingletonCurrentlyInCreation(beanName));
if (earlySingletonExposure) {
if (logger.isTraceEnabled()) {
logger.trace("Eagerly caching bean '" + beanName +
"' to allow for resolving potential circular references");
}
addSingletonFactory(beanName, () -> getEarlyBeanReference(beanName, mbd, bean));
}
// Initialize the bean instance.
Object exposedObject = bean;
try {
//4、注入Bean
populateBean(beanName, mbd, instanceWrapper);
//5、初始化Bean
exposedObject = initializeBean(beanName, exposedObject, mbd);
}//异常处理
//早期暴露
if (earlySingletonExposure) {
Object earlySingletonReference = getSingleton(beanName, false);
if (earlySingletonReference != null) {
if (exposedObject == bean) {
exposedObject = earlySingletonReference;
}
else if (!this.allowRawInjectionDespiteWrapping && hasDependentBean(beanName)) {
String[] dependentBeans = getDependentBeans(beanName);
Set<String> actualDependentBeans = new LinkedHashSet<>(dependentBeans.length);
for (String dependentBean : dependentBeans) {
if (!removeSingletonIfCreatedForTypeCheckOnly(dependentBean)) {
actualDependentBeans.add(dependentBean);
}
}
if (!actualDependentBeans.isEmpty()) {
//抛出异常
}
}
}
}
// Register bean as disposable（一次性的）.
try {
registerDisposableBeanIfNecessary(beanName, bean, mbd);
}
catch (BeanDefinitionValidationException ex) {
throw new BeanCreationException(
mbd.getResourceDescription(), beanName, "Invalid destruction signature", ex);
}
return exposedObject;
}
复制代码流程分析
1、实例化
创建Bean实例，实例化可分为三大部分：
-
实例化前置处理
InstantiationAwareBeanPostProcessor添加实例化前回调的BeanPostProcessor子接口，以及实例化后但在设置显式属性或发生自动装配之前的回调（在populateBean中调用）。 -
创建实例
使用对应的实例化策略（即三种实例bean的方式）进行实例化
-
实例化后置处理
即
MergedBeanDefinitionPostProcessor允许在bean实例化合并一些元数据到BeanDefinition当中，例如依赖注入的元数据就是在此处解析的。
1.1 resolveBeforeInstantiation 创建前置处理
在实例化前的后置处理器，处理一些实例化前的**Aware**。根据源码是执行InstantiationAwareBeanPostProcessor相关的后置处理器。
protected Object resolveBeforeInstantiation(String beanName, RootBeanDefinition mbd) {
Object bean = null;
if (!Boolean.FALSE.equals(mbd.beforeInstantiationResolved)) {
// Make sure bean class is actually resolved at this point.
//如果不是合成的 ？？？ 并且有实例化前的Aware BeanPostProcessor
if (!mbd.isSynthetic() && hasInstantiationAwareBeanPostProcessors()) {
Class<?> targetType = determineTargetType(beanName, mbd);
if (targetType != null) {
bean = applyBeanPostProcessorsBeforeInstantiation(targetType, beanName);
if (bean != null) {
bean = applyBeanPostProcessorsAfterInitialization(bean, beanName);
}
}
}
mbd.beforeInstantiationResolved = (bean != null);
}
return bean;
}
//调用实例化前的BeanPostProcessor-InstantiationAwareBeanPostProcessor
protected Object applyBeanPostProcessorsBeforeInstantiation(Class<?> beanClass, String beanName) {
for (BeanPostProcessor bp : getBeanPostProcessors()) {
//
if (bp instanceof InstantiationAwareBeanPostProcessor) {
InstantiationAwareBeanPostProcessor ibp = (InstantiationAwareBeanPostProcessor) bp;
Object result = ibp.postProcessBeforeInstantiation(beanClass, beanName);
if (result != null) {
return result;
}
}
}
return null;
}
复制代码1.2 createBeanInstance创建Bean
根据BeanDefinition的配置调用不同的实例化策略进行实例化。本质上就是那三种bean的实例化方式-InstantiationStrategy
-
构造函数
-
静态工厂
-
实例工厂
-
外部实例
例如在外面实例化，再利用
SingletonBeanRegistry注册到容器中
//实例化策略
public interface InstantiationStrategy {
//直接在此工厂中返回具有给定名称的 bean 实例。有些bean是在外部实例化后注册进来的
Object instantiate(RootBeanDefinition bd, @Nullable String beanName, BeanFactory owner)
throws BeansException;
//构造函数
Object instantiate(RootBeanDefinition bd, @Nullable String beanName, BeanFactory owner,
Constructor<?> ctor, Object... args) throws BeansException;
//静态工厂或者实例工厂
Object instantiate(RootBeanDefinition bd, @Nullable String beanName, BeanFactory owner,
@Nullable Object factoryBean, Method factoryMethod, Object... args)
throws BeansException;
}
//源码
protected BeanWrapper createBeanInstance(String beanName, RootBeanDefinition mbd, @Nullable Object[] args) {
// Make sure bean class is actually resolved at this point.
Class<?> beanClass = resolveBeanClass(mbd, beanName);
//非pubic的类无法构建
if (beanClass != null && !Modifier.isPublic(beanClass.getModifiers()) && !mbd.isNonPublicAccessAllowed()) {
throw new BeanCreationException(mbd.getResourceDescription(), beanName,
"Bean class isn't public, and non-public access not allowed: " + beanClass.getName());
}
//有提供者
Supplier<?> instanceSupplier = mbd.getInstanceSupplier();
if (instanceSupplier != null) {
return obtainFromSupplier(instanceSupplier, beanName);
}
//工厂方法
if (mbd.getFactoryMethodName() != null) {
return instantiateUsingFactoryMethod(beanName, mbd, args);
}
// Shortcut when re-creating the same bean... 重新构建一个相同的bean时可加快的处理
boolean resolved = false;
boolean autowireNecessary = false;
if (args == null) {
synchronized (mbd.constructorArgumentLock) {
if (mbd.resolvedConstructorOrFactoryMethod != null) {
resolved = true;
autowireNecessary = mbd.constructorArgumentsResolved;
}
}
}
//之前构建过
if (resolved) {
if (autowireNecessary) {
//自动装配构造函数构建
return autowireConstructor(beanName, mbd, null, null);
}
else {
//默认构造函数构建
return instantiateBean(beanName, mbd);
}
}
// Candidate constructors for autowiring? 构造器自动装配
Constructor<?>[] ctors = determineConstructorsFromBeanPostProcessors(beanClass, beanName);
if (ctors != null || mbd.getResolvedAutowireMode() == AUTOWIRE_CONSTRUCTOR ||
mbd.hasConstructorArgumentValues() || !ObjectUtils.isEmpty(args)) {
return autowireConstructor(beanName, mbd, ctors, args);
}
// Preferred constructors for default construction? 有优选选择的构造器
ctors = mbd.getPreferredConstructors();
if (ctors != null) {
return autowireConstructor(beanName, mbd, ctors, null);
}
//没有特殊出路就是调用无参的构造器
// No special handling: simply use no-arg constructor.
return instantiateBean(beanName, mbd);
}
复制代码1.3 applyMergedBeanDefinitionPostProcessors-实例化后置处理
执行MergedBeanDefinitionPostProcessor.postProcessMergedBeanDefinition运行时合并bean 定义的后处理器回调接口。例如下面两个将一些运行时的元数据解析合并到beanDefinition中。例如基于注解依赖注入的元数据就是在此解析后加入到BeanDefinition当中。
CommonAnnotationBeanPostProcessor
处理Java @Resource、@PostConstruct、@PreDestroy等元数据
public void postProcessMergedBeanDefinition(RootBeanDefinition beanDefinition, Class<?> beanType, String beanName) {
super.postProcessMergedBeanDefinition(beanDefinition, beanType, beanName);
InjectionMetadata metadata = findResourceMetadata(beanName, beanType, null);
metadata.checkConfigMembers(beanDefinition);
}
复制代码AutowiredAnnotationBeanPostProcessor
@Autowire注解注入依赖逻辑，找到@Autowire对应的注入信息。
public void postProcessMergedBeanDefinition(RootBeanDefinition beanDefinition, Class<?> beanType, String beanName) {
InjectionMetadata metadata = findAutowiringMetadata(beanName, beanType, null);
metadata.checkConfigMembers(beanDefinition);
}
复制代码2、populateBean填充Bean属性（依赖注入和自动装配）
完成自动装配（包含三个注解自动装配）。使用Bean定义中的属性值填充给定的BeanWrapper中的Bean实例，包含自动装配（BeanDefinition中autowire） 且执行了InstantiationAwareBeanPostProcessor后置处理器（特殊的后置器）的postProcessAfterInstantiation和postProcessPropertyValues，在postProcessPropertyValues中进行了注解方式的@Resource、@Value、@Autowire的自动装配等操作。
ps:这里只关注了自动装配，可能有其他功能实现。
protected void populateBean(String beanName, RootBeanDefinition mbd, @Nullable BeanWrapper bw) {
//null值出力
//2.1实例化后置处理
// Give any InstantiationAwareBeanPostProcessors the opportunity to modify the
// state of the bean before properties are set. This can be used, for example,
// to support styles of field injection.
if (!mbd.isSynthetic() && hasInstantiationAwareBeanPostProcessors()) {
for (InstantiationAwareBeanPostProcessor bp : getBeanPostProcessorCache().instantiationAware) {
if (!bp.postProcessAfterInstantiation(bw.getWrappedInstance(), beanName)) {
return;
}
}
}
PropertyValues pvs = (mbd.hasPropertyValues() ? mbd.getPropertyValues() : null);
//2.2 自动装配
int resolvedAutowireMode = mbd.getResolvedAutowireMode();
if (resolvedAutowireMode == AUTOWIRE_BY_NAME || resolvedAutowireMode == AUTOWIRE_BY_TYPE) {
MutablePropertyValues newPvs = new MutablePropertyValues(pvs);
// Add property values based on autowire by name if applicable.
if (resolvedAutowireMode == AUTOWIRE_BY_NAME) {
autowireByName(beanName, mbd, bw, newPvs);
}
// Add property values based on autowire by type if applicable.
if (resolvedAutowireMode == AUTOWIRE_BY_TYPE) {
autowireByType(beanName, mbd, bw, newPvs);
}
pvs = newPvs;
}
boolean hasInstAwareBpps = hasInstantiationAwareBeanPostProcessors();
boolean needsDepCheck = (mbd.getDependencyCheck() != AbstractBeanDefinition.DEPENDENCY_CHECK_NONE);
PropertyDescriptor[] filteredPds = null;
if (hasInstAwareBpps) {
if (pvs == null) {
pvs = mbd.getPropertyValues();
}
for (InstantiationAwareBeanPostProcessor bp : getBeanPostProcessorCache().instantiationAware) {
PropertyValues pvsToUse = bp.postProcessProperties(pvs, bw.getWrappedInstance(), beanName);
if (pvsToUse == null) {
if (filteredPds == null) {
filteredPds = filterPropertyDescriptorsForDependencyCheck(bw, mbd.allowCaching);
}
pvsToUse = bp.postProcessPropertyValues(pvs, filteredPds, bw.getWrappedInstance(), beanName);
if (pvsToUse == null) {
return;
}
}
pvs = pvsToUse;
}
}
if (needsDepCheck) {
if (filteredPds == null) {
filteredPds = filterPropertyDescriptorsForDependencyCheck(bw, mbd.allowCaching);
}
checkDependencies(beanName, mbd, filteredPds, pvs);
}
if (pvs != null) {
applyPropertyValues(beanName, mbd, bw, pvs);
}
}
复制代码2.1 实例化后置处理器InstantiationAwareBeanPostProcessor
在实例化前置的处理时，提到过这个接口，这里就是实例化后但在设置显式属性或发生自动装配之前的回调。
2.1.1注解方式的注入
基于注解形式的依赖注入的都是在此实现的（也是注解方式的自动装配），原理是反射调用设置字段值。。
2.1.1.1 处理@Value和@Autowire
AutowiredAnnotationBeanPostProcessor处理@Value和@Autowire注解，根据bean的InjectionMetadata进行注入。具体实现方式通过反射设置字段值。
public PropertyValues postProcessProperties(PropertyValues pvs, Object bean, String beanName) {
//获取注入元数据
InjectionMetadata metadata = findAutowiringMetadata(beanName, bean.getClass(), pvs);
try {
//进行注入
metadata.inject(bean, beanName, pvs);
}
catch (BeanCreationException ex) {
throw ex;
}
catch (Throwable ex) {
throw new BeanCreationException(beanName, "Injection of autowired dependencies failed", ex);
}
return pvs;
}
protected void inject(Object bean, @Nullable String beanName, @Nullable PropertyValues pvs) throws Throwable {
//主要处理的字段
Field field = (Field) this.member;
Object value;
//解析需要注入值
if (this.cached) {
try {
value = resolvedCachedArgument(beanName, this.cachedFieldValue);
}
catch (NoSuchBeanDefinitionException ex) {
// Unexpected removal of target bean for cached argument -> re-resolve
value = resolveFieldValue(field, bean, beanName);
}
}
else {
value = resolveFieldValue(field, bean, beanName);
}
//反射设置值
if (value != null) {
ReflectionUtils.makeAccessible(field);
field.set(bean, value);
}
}
复制代码2.1.1.2处理 @Resource
CommonAnnotationBeanPostProcessor处理Java @Resource注解，实现方式和上节AutowiredAnnotationBeanPostProcessor类似，只不过在解析注入元数据不一样。
2.2 自动装配
Spring支持5种自动装配分别如下：
//AutowireCapableBeanFactory
//不自动装配
int AUTOWIRE_NO = 0;
//按名字自动装配
int AUTOWIRE_BY_NAME = 1;
//按类型自动装配
int AUTOWIRE_BY_TYPE = 2;
//按构造器自动装配
int AUTOWIRE_CONSTRUCTOR = 3;
//自动探测 就是混合自动装配 已经启用更推荐使用注解形式
@Deprecated
int AUTOWIRE_AUTODETECT = 4;
复制代码自动装配使用方法就是设置BeanDefinition的自动装配属性,例如
<bean id="people" class="com.kuang.pojo.Peopel" autowire="byName">
<property name="name" value="张三"/>
</bean>
复制代码3、initializeBean初始化Bean
Bean大部分生命周期都在此。分为四大部分：
- 执行Aware相关接口
- 初始化前置处理
- 执行初始化方法
- 初始化后置处理
protected Object initializeBean(String beanName, Object bean, @Nullable RootBeanDefinition mbd) {
if (System.getSecurityManager() != null) {
AccessController.doPrivileged((PrivilegedAction<Object>) () -> {
invokeAwareMethods(beanName, bean);
return null;
}, getAccessControlContext());
}
else {
invokeAwareMethods(beanName, bean);
}
Object wrappedBean = bean;
if (mbd == null || !mbd.isSynthetic()) {
wrappedBean = applyBeanPostProcessorsBeforeInitialization(wrappedBean, beanName);
}
try {
invokeInitMethods(beanName, wrappedBean, mbd);
}
catch (Throwable ex) {
throw new BeanCreationException(
(mbd != null ? mbd.getResourceDescription() : null),
beanName, "Invocation of init method failed", ex);
}
if (mbd == null || !mbd.isSynthetic()) {
wrappedBean = applyBeanPostProcessorsAfterInitialization(wrappedBean, beanName);
}
return wrappedBean;
}
复制代码3.1 执行Aware接口
Aware感知到需要的资源已经准备好，可以直接获取。执行顺序如下
- BeanNameAware
- BeanClassLoaderAware
- BeanFactoryAware
- EnvironmentAware
- EmbeddedValueResolverAware
- ResourceLoaderAware
- ApplicationEventPublisherAware
- MessageSourceAware
- ApplicationContextAware
private void invokeAwareMethods(String beanName, Object bean) {
if (bean instanceof Aware) {
if (bean instanceof BeanNameAware) {
((BeanNameAware) bean).setBeanName(beanName);
}
if (bean instanceof BeanClassLoaderAware) {
ClassLoader bcl = getBeanClassLoader();
if (bcl != null) {
((BeanClassLoaderAware) bean).setBeanClassLoader(bcl);
}
}
if (bean instanceof BeanFactoryAware) {
((BeanFactoryAware) bean).setBeanFactory(AbstractAutowireCapableBeanFactory.this);
}
}
}
复制代码执行Bean后置处理器的postProcessBeforeInitialization即特殊的初始化前处理。ApplicationContextAwareProcessor后置处理器它暴露了很多Aware接结口Aware设置顺序如下：
private void invokeAwareInterfaces(Object bean) {
if (bean instanceof EnvironmentAware) {
((EnvironmentAware) bean).setEnvironment(this.applicationContext.getEnvironment());
}
if (bean instanceof EmbeddedValueResolverAware) {
((EmbeddedValueResolverAware) bean).setEmbeddedValueResolver(this.embeddedValueResolver);
}
if (bean instanceof ResourceLoaderAware) {
((ResourceLoaderAware) bean).setResourceLoader(this.applicationContext);
}
if (bean instanceof ApplicationEventPublisherAware) {
((ApplicationEventPublisherAware) bean).setApplicationEventPublisher(this.applicationContext);
}
if (bean instanceof MessageSourceAware) {
((MessageSourceAware) bean).setMessageSource(this.applicationContext);
}
if (bean instanceof ApplicationContextAware) {
((ApplicationContextAware) bean).setApplicationContext(this.applicationContext);
}
}
复制代码ImportAware
ImportAwareBeanPostProcessor处理**ImportAware**接口。即针对于使用 @Import导入bean时，bean通过该接口可以拿到Import元数据。
@Override
public Object postProcessBeforeInitialization(Object bean, String beanName) {
if (bean instanceof ImportAware) {
ImportRegistry ir = this.beanFactory.getBean(IMPORT_REGISTRY_BEAN_NAME, ImportRegistry.class);
AnnotationMetadata importingClass = ir.getImportingClassFor(ClassUtils.getUserClass(bean).getName());
if (importingClass != null) {
((ImportAware) bean).setImportMetadata(importingClass);
}
}
return bean;
}
复制代码3.2 Bena后置处理器的初始化前置处理方法
执行初始化的前置处理
3.2.1@PostConstruct
CommonAnnotationBeanPostProcessor在postProcessBeforeInitialization去执行@PostConstruct指定的初始化方法。
@Override
public Object postProcessBeforeInitialization(Object bean, String beanName) throws BeansException {
LifecycleMetadata metadata = findLifecycleMetadata(bean.getClass());
try {
metadata.invokeInitMethods(bean, beanName);
}
catch (InvocationTargetException ex) {
throw new BeanCreationException(beanName, "Invocation of init method failed", ex.getTargetException());
}
catch (Throwable ex) {
throw new BeanCreationException(beanName, "Failed to invoke init method", ex);
}
return bean;
}
public void invokeInitMethods(Object target, String beanName) throws Throwable {
Collection<LifecycleElement> checkedInitMethods = this.checkedInitMethods;
Collection<LifecycleElement> initMethodsToIterate =
(checkedInitMethods != null ? checkedInitMethods : this.initMethods);
if (!initMethodsToIterate.isEmpty()) {
for (LifecycleElement element : initMethodsToIterate) {
if (logger.isTraceEnabled()) {
logger.trace("Invoking init method on bean '" + beanName + "': " + element.getMethod());
}
element.invoke(target);
}
}
}
复制代码3.3 invokeInitMethods-执行初始化方法
Bean的指定的一些初始化方法，执行顺序如下：
3.3.1InitializingBean.afterPropertiesSet
实现了InitializingBean接口
3.3.2invokeCustomInitMethod-自定义初始化方法
用户指定的触发化方法
protected void invokeInitMethods(String beanName, Object bean, @Nullable RootBeanDefinition mbd)throws Throwable {
boolean isInitializingBean = (bean instanceof InitializingBean);
//如果实现InitializingBean接口 则执行afterPropertiesSet方法
if (isInitializingBean && (mbd == null || !mbd.isExternallyManagedInitMethod("afterPropertiesSet"))) {
if (logger.isTraceEnabled()) {
logger.trace("Invoking afterPropertiesSet() on bean with name '" + beanName + "'");
}
if (System.getSecurityManager() != null) {
try {
AccessController.doPrivileged((PrivilegedExceptionAction<Object>) () -> {
((InitializingBean) bean).afterPropertiesSet();
return null;
}, getAccessControlContext());
}
catch (PrivilegedActionException pae) {
throw pae.getException();
}
}
else {
((InitializingBean) bean).afterPropertiesSet();
}
}
//执行自定义的初始化方法
if (mbd != null && bean.getClass() != NullBean.class) {
String initMethodName = mbd.getInitMethodName();
if (StringUtils.hasLength(initMethodName) &&
!(isInitializingBean && "afterPropertiesSet".equals(initMethodName)) &&
!mbd.isExternallyManagedInitMethod(initMethodName)) {
invokeCustomInitMethod(beanName, bean, mbd);
}
}
}
复制代码3.4 Bean后置处理器的初始化后置处理方法
初始化后的后置处理，执行Bean后置处理器的postProcessAfterInitialization。例如AOP代理对象的生成就是通过Bean后置处理的初始化后置处理完成的
public Object applyBeanPostProcessorsAfterInitialization(Object existingBean, String beanName)
throws BeansException {
Object result = existingBean;
for (BeanPostProcessor processor : getBeanPostProcessors()) {
Object current = processor.postProcessAfterInitialization(result, beanName);
if (current == null) {
return result;
}
result = current;
}
return result;
}
//AOP代理对象生成 AbstractAutoProxyCreator代码片段
public Object postProcessAfterInitialization(@Nullable Object bean, String beanName) {
if (bean != null) {
Object cacheKey = getCacheKey(bean.getClass(), beanName);
if (this.earlyProxyReferences.remove(cacheKey) != bean) {
return wrapIfNecessary(bean, beanName, cacheKey);
}
}
return bean;
}
复制代码4、销毁
销毁和初始化差不多，每个Bean在创建时都会创建一个DisposableBeanAdapter用于销毁Bean执行顺序如下：
4.1postProcessBeforeDestruction：@PreDestroy
利用CommonAnnotationBeanPostProcessor继承了InitDestroyAnnotationBeanPostProcessor在postProcessBeforeDestruction中执行了@PreDestroy指定的销毁方法
@Override
public void postProcessBeforeDestruction(Object bean, String beanName) throws BeansException {
LifecycleMetadata metadata = findLifecycleMetadata(bean.getClass());
try {
metadata.invokeDestroyMethods(bean, beanName);
}
catch (InvocationTargetException ex) {
String msg = "Destroy method on bean with name '" + beanName + "' threw an exception";
if (logger.isDebugEnabled()) {
logger.warn(msg, ex.getTargetException());
}
else {
logger.warn(msg + ": " + ex.getTargetException());
}
}
catch (Throwable ex) {
logger.warn("Failed to invoke destroy method on bean with name '" + beanName + "'", ex);
}
复制代码4.2DisposableBean.destroy
bean实现DisposableBean即可时在销毁时执行destroy()方法
4.3invokeCustomDestroyMethod-自定义销毁方法
用户指定的销毁方法
@Override
public void destroyBean(Object existingBean) {
new DisposableBeanAdapter(existingBean, getBeanPostProcessors(), getAccessControlContext()).destroy();
}
public void destroy() {
//1、postProcessBeforeDestruction
if (!CollectionUtils.isEmpty(this.beanPostProcessors)) {
//执行销毁Aware相关的后置处理器的postProcessBeforeDestruction
for (DestructionAwareBeanPostProcessor processor : this.beanPostProcessors) {
processor.postProcessBeforeDestruction(this.bean, this.beanName);
}
}
//2、DisposableBean
if (this.invokeDisposableBean) {
//日志打印
try {
if (System.getSecurityManager() != null) {
AccessController.doPrivileged((PrivilegedExceptionAction<Object>) () -> {
((DisposableBean) this.bean).destroy();
return null;
}, this.acc);
}
else {
((DisposableBean) this.bean).destroy();
}
}
catch (Throwable ex) {
//异常处理
}
}
//自定义销毁方法
if (this.destroyMethod != null) {
invokeCustomDestroyMethod(this.destroyMethod);
}
else if (this.destroyMethodName != null) {
Method methodToInvoke = determineDestroyMethod(this.destroyMethodName);
if (methodToInvoke != null) {
invokeCustomDestroyMethod(ClassUtils.getInterfaceMethodIfPossible(methodToInvoke));
}
}
}
复制代码三、Bean延迟加载
根据上节的源码分析，Beanfactory初始化(finishBeanFactoryInitialization)时会创建非懒加载单例Bean，且由getBean方法去创建一个Bean。所以对于懒加载的Bean也是由**getBean**获取，依赖注入也是在Bean后置处理器中通过getBean去获取依赖的Bean。在doGetBean（getBean调用）中如果Bean不存在会创建一个新的Bean（createBean）。所以一个懒加载被一个非拦截加载的Bean所依赖，此时拦截bean还是会在启动流程中实例化。
四、Bean循环依赖
循环依赖是指两个Bean之间互相依赖的导致循环创建问题。Spring提供了三级缓存来解决循环依赖问题。由于Bean生命周期很长，所以可以调用构造器后立即暴露引用（放入缓冲中，下次获取则直接从缓存中获取）那么不需要等Bean完全初始化便可使用。
首先对于原型Bean的循环依赖是无法解决的，因为原型Bean每次获取都是创建新Bean是不能放入缓存中的。其次构造器注入的循环依赖无法解决，因为无法先构造而。
对应单例Bean ，Spring在getBean时先尝试从缓存中获取，获取不到再去createBean。根据源码我们可以看到缓存分三级，依次从这些缓存中获取。
public Object getSingleton(String beanName) {
return getSingleton(beanName, true);
}
@Nullable
protected Object getSingleton(String beanName, boolean allowEarlyReference) {
//从一级缓存中获取
Object singletonObject = this.singletonObjects.get(beanName);
//如果一级缓存中没有且单例Bean是在创建中
if (singletonObject == null && isSingletonCurrentlyInCreation(beanName)) {
synchronized (this.singletonObjects) {
//从二级缓存中获取
singletonObject = this.earlySingletonObjects.get(beanName);
//二级缓存中没有 且允许提前使用引用
if (singletonObject == null && allowEarlyReference) {
//从三级缓存中获取
ObjectFactory<?> singletonFactory = this.singletonFactories.get(beanName);
if (singletonFactory != null) {
//获得Bean 引用
singletonObject = singletonFactory.getObject();
//升级到二级缓存
this.earlySingletonObjects.put(beanName, singletonObject);
//删除三级缓存
this.singletonFactories.remove(beanName);
}
}
}
}
return singletonObject;
}
复制代码1、一级缓存-singletonObjects
一级缓存中是完整的Bean实例，是直接可以使用的，也叫单例池。
//一级缓存
private final Map<String, Object> singletonObjects = new ConcurrentHashMap<>(256);
复制代码AbstractBeanFactory.doGetBean中获取或者创建Bean，如果是新的Bean则加入一级缓存，于此同时会删除二、三级缓存。createBean方法完成意味着Bean走完了生命周期，此时的Bean是完整的。
// Create bean instance.
if (mbd.isSingleton()) {
//
sharedInstance = getSingleton(beanName, () -> {
try {
return createBean(beanName, mbd, args);
}
catch (BeansException ex) {
destroySingleton(beanName);
throw ex;
}
});
bean = getObjectForBeanInstance(sharedInstance, name, beanName, mbd);
}
//创建新的Bean singletonFactory为上面lambda表达式即通过createBean创建新的
try {
singletonObject = singletonFactory.getObject();
newSingleton = true;
}
//是新的Bean
if (newSingleton) {
addSingleton(beanName, singletonObject);
}
//加入一级缓存
protected void addSingleton(String beanName, Object singletonObject) {
synchronized (this.singletonObjects) {
this.singletonObjects.put(beanName, singletonObject);
this.singletonFactories.remove(beanName);
this.earlySingletonObjects.remove(beanName);
this.registeredSingletons.add(beanName);
}
}
复制代码2、二级缓存-earlySingletonObjects
二级缓存存放的是早期的Bean（可能是非完整的bean），getSingleton中会依次遍历这三级缓存，如果是在三级缓存中则通过对应的ObjectFactory（在此对）获得Bean，并升级到二级缓存中。
复制代码3、三级缓存-singletonFactories
在创建Bean时如果发现是单例Bean且允许提前暴露引用则加入三级缓存。三级缓存存储的是Bean对应的**ObjectFactory**即Bean的工厂，其逻辑是通过在getObject中调用getEarlyBeanReference（它是Spring预留的扩展点通过SmartInstantiationAwareBeanPostProcessor对其扩展）。三级缓存的目的是解决存在aop代理时提前触发代理对象的生成。
/** 三级缓存 Cache of singleton factories: bean name to ObjectFactory. */
private final Map<String, ObjectFactory<?>> singletonFactories = new HashMap<>(16);
//--------------------------------------------------------------
//doCreateBean方法中 在此代码块之前是创建Bean实例createBeanInstance方法，
// Eagerly cache singletons to be able to resolve circular references
// even when triggered by lifecycle interfaces like BeanFactoryAware.
//是单例且允许循环依赖引用以及当前Bean正在创建中则 表示可以提前暴露引用
boolean earlySingletonExposure = (mbd.isSingleton() && this.allowCircularReferences &&
isSingletonCurrentlyInCreation(beanName));
if (earlySingletonExposure) {
//加入三级缓存
addSingletonFactory(beanName, () -> getEarlyBeanReference(beanName, mbd, bean));
}
//加入三级缓存
protected void addSingletonFactory(String beanName, ObjectFactory<?> singletonFactory) {
Assert.notNull(singletonFactory, "Singleton factory must not be null");
//注意synchronized
synchronized (this.singletonObjects) {
//线程安全所以看看其他有没有创建完成
if (!this.singletonObjects.containsKey(beanName)) {
//加入三级缓存
this.singletonFactories.put(beanName, singletonFactory);
//删除二级缓存
this.earlySingletonObjects.remove(beanName);
this.registeredSingletons.add(beanName);
}
}
}
复制代码getEarlyBeanReference
getEarlyBeanReference是Spring预留的扩展点-针对获取Bean提前暴露的引用的一次性扩展操作，通过SmartInstantiationAwareBeanPostProcessor后置处理器回调getEarlyBeanReference方法对其扩展。例如为了解决存在AOP时的循环依赖而提前触发AOP代理对象生成。
protected Object getEarlyBeanReference(String beanName, RootBeanDefinition mbd, Object bean) {
Object exposedObject = bean;
if (!mbd.isSynthetic() && hasInstantiationAwareBeanPostProcessors()) {
for (BeanPostProcessor bp : getBeanPostProcessors()) {
if (bp instanceof SmartInstantiationAwareBeanPostProcessor) {
SmartInstantiationAwareBeanPostProcessor ibp = (SmartInstantiationAwareBeanPostProcessor) bp;
exposedObject = ibp.getEarlyBeanReference(exposedObject, beanName);
}
}
}
return exposedObject;
}
复制代码4、为什么要三级缓存？
通过原理分析，一般情况我们只需要二级缓存即用另一个缓存提前暴露引用（构造后）便可解决循环依赖的问题，但是Spring AOP会生成代理对象也就是会修改引用是不能直接用提前暴露的引用的。利用三级缓存预留扩展点，三级缓存获取时对暴露的Bean引用做一次性的处理-存在AOP时是需要提前触发生成代理对象然后暴露出去。因为代理对象的生成是在bean后置处理器中的后置处理完成的，而Bean属性填充等其他方式依赖其他Bean是在其前面的（也就是循环依赖是在前面），所以需要提前触发才能解决此循环依赖问题。
696
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
