学习MSP432M0手册——第九节SPI和LCD显示

最新推荐文章于 2024-06-15 22:21:58 发布

logicft

最新推荐文章于 2024-06-15 22:21:58 发布

阅读量652

点赞数 14

分类专栏： MSP432M0 文章标签：学习 c语言单片机嵌入式硬件

本文链接：https://blog.csdn.net/m0_73609670/article/details/139144972

版权

MSP432M0 专栏收录该内容

9 篇文章 1 订阅

订阅专栏

一、本节内容

1. 完成51单片机LCD显示代码的移植

2. 利用字库软件，实现自己姓名的显示

3. 结合AD功能，屏幕显示采集的电压值信息

4. 分析代码，确定本次实验的LCD模块采用那种SPI工作模式（要求阐述清楚分析过程，有波形图，说明思考过程）

二、原理讲解

本节先使用syscfg配置GPIO口，ADC，然后使用直接生成的初始化代码，将电位器连接到板子上，在OLED屏幕上显示实时电压。

三、库函数

部分库函数和寄存器：

学习MSP432M0手册——第二节GPIO输入和输出

学习MSP432M0手册——第三节GPIO中断

学习MSP432M0手册——第四节SDK和UART

学习MSP432M0手册——第五节systick和UART接收

学习MSP432M0手册——第六节ADC采样

学习MSP432M0手册——第八节PWM定时器实验

本节所有库函数都在以上文章出现过。

四、软件代码

#include "ti_msp_dl_config.h"
#include "ti/devices/msp/m0p/mspm0g350x.h"
#define DELAY (16000000)

int adcvalue;//adc值
char adcchar[6];//adc发送显示屏值
volatile bool gCheckADC;
volatile uint16_t adcResult;

int main(void)
{
    /* Power on GPIO, initialize pins as digital outputs */
    SYSCFG_DL_init();//初始化

    /* Default: LED1 and LED3 ON, LED2 OFF */
    DL_GPIO_clearPins(GPIO_LEDS_PORT,
GPIO_LEDS_USER_LED_2_PIN);//GPIO口置0
    DL_GPIO_setPins(GPIO_LEDS_PORT, GPIO_LEDS_USER_LED_1_PIN |
                                        GPIO_LEDS_USER_LED_3_PIN |
                                        GPIO_LEDS_USER_TEST_PIN); //GPIO口置1

    
    LCD_Init(); //LCD初始化
 
    while(1) 
    {
         DL_ADC12_startConversion(ADC12_0_INST);//开始AD转换
        
        
        adcResult = DL_ADC12_getMemResult(ADC12_0_INST, DL_ADC12_MEM_IDX_0);//adc值读取
//数据处理
        adcvalue = 3.3*100*adcResult/4095; 

        adcchar[0] = adcvalue/100 +'0';  
        adcchar[1] = '.'; 
        adcchar[2] = adcvalue%100/10 +'0'; 
        adcchar[3] = adcvalue%10 +'0'; 
        adcchar[4] = 'V'; 
        adcchar[5] = '\0';
        LCD_P14x16Ch(36,0,0); //测0
        LCD_P14x16Ch(50,0,1);	//试1
        LCD_P14x16Ch(64,0,2);	//中2     
        LCD_P8x16Str(48,5,adcchar); 
        delay_cycles(32000);    
        DL_ADC12_enableConversions(ADC12_0_INST);//ad转化开启
    }

LQ2864.c文件：



#include "LQ12864.h"
#include "ti_msp_dl_config.h"

#define XLevelL		0x00
#define XLevelH		0x10
#define XLevel		((XLevelH&0x0F)*16+XLevelL)
#define Max_Column	128
#define Max_Row		64
#define	Brightness	0xCF 

#define LCD_DC_1 DL_GPIO_setPins(GPIO_LEDS_PORT,GPIO_LCD_PIN_DC_PIN)
#define LCD_DC_0 DL_GPIO_clearPins(GPIO_LEDS_PORT,GPIO_LCD_PIN_DC_PIN)

#define LCD_SCL_1 DL_GPIO_setPins(GPIO_LEDS_PORT,GPIO_LCD_PIN_SCL_PIN)
#define LCD_SCL_0 DL_GPIO_clearPins(GPIO_LEDS_PORT,GPIO_LCD_PIN_SCL_PIN)

#define LCD_SDA_1 DL_GPIO_setPins(GPIO_LEDS_PORT,GPIO_LCD_PIN_SDA_PIN)
#define LCD_SDA_0 DL_GPIO_clearPins(GPIO_LEDS_PORT,GPIO_LCD_PIN_SDA_PIN)

#define LCD_RST_1 DL_GPIO_setPins(GPIO_LEDS_PORT,GPIO_LCD_PIN_RST_PIN)
#define LCD_RST_0 DL_GPIO_clearPins(GPIO_LEDS_PORT,GPIO_LCD_PIN_RST_PIN)
/*
4线SPI使用说明：
VBT 供内部DC-DC电压，3.3~4.3V，如果使用5V电压，为保险起见串一个100~500欧的电阻
VCC 供内部逻辑电压 1.8~6V   
GND 地

BS0 低电平
BS1 低电平
BS2 低电平

CS  片选管脚
DC  命令数据选择管脚
RES 模块复位管脚 
D0（SCLK） ，时钟脚，由MCU控制
D1（MOSI） ，主输出从输入数据脚，由MCU控制

D2 悬空      
D3-D7 ， 低电平 ， 也可悬空，但最好设为低电平
RD  低电平 ，也可悬空，但最好设为低电平
RW  低电平 ，也可悬空，但最好设为低电平
RD  低电平 ，也可悬空，但最好设为低电平   
*/

#define X_WIDTH 128
#define Y_WIDTH 64
//======================================

const unsigned char F6x8[][6] =
{
    { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },   // sp
    { 0x00, 0x00, 0x00, 0x2f, 0x00, 0x00 },   // !
    { 0x00, 0x00, 0x07, 0x00, 0x07, 0x00 },   // "
    { 0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14 },   // #
    { 0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12 },   // $
    { 0x00, 0x62, 0x64, 0x08, 0x13, 0x23 },   // %
    { 0x00, 0x36, 0x49, 0x55, 0x22, 0x50 },   // &
    { 0x00, 0x00, 0x05, 0x03, 0x00, 0x00 },   // '
    { 0x00, 0x00, 0x1c, 0x22, 0x41, 0x00 },   // (
    { 0x00, 0x00, 0x41, 0x22, 0x1c, 0x00 },   // )
    { 0x00, 0x14, 0x08, 0x3E, 0x08, 0x14 },   // *
    { 0x00, 0x08, 0x08, 0x3E, 0x08, 0x08 },   // +
    { 0x00, 0x00, 0x00, 0xA0, 0x60, 0x00 },   // ,
    { 0x00, 0x08, 0x08, 0x08, 0x08, 0x08 },   // -
    { 0x00, 0x00, 0x60, 0x60, 0x00, 0x00 },   // .
    { 0x00, 0x20, 0x10, 0x08, 0x04, 0x02 },   // /
    { 0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E },   // 0
    { 0x00, 0x00, 0x42, 0x7F, 0x40, 0x00 },   // 1
    { 0x00, 0x42, 0x61, 0x51, 0x49, 0x46 },   // 2
    { 0x00, 0x21, 0x41, 0x45, 0x4B, 0x31 },   // 3
    { 0x00, 0x18, 0x14, 0x12, 0x7F, 0x10 },   // 4
    { 0x00, 0x27, 0x45, 0x45, 0x45, 0x39 },   // 5
    { 0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30 },   // 6
    { 0x00, 0x01, 0x71, 0x09, 0x05, 0x03 },   // 7
    { 0x00, 0x36, 0x49, 0x49, 0x49, 0x36 },   // 8
    { 0x00, 0x06, 0x49, 0x49, 0x29, 0x1E },   // 9
    { 0x00, 0x00, 0x36, 0x36, 0x00, 0x00 },   // :
    { 0x00, 0x00, 0x56, 0x36, 0x00, 0x00 },   // ;
    { 0x00, 0x08, 0x14, 0x22, 0x41, 0x00 },   // <
    { 0x00, 0x14, 0x14, 0x14, 0x14, 0x14 },   // =
    { 0x00, 0x00, 0x41, 0x22, 0x14, 0x08 },   // >
    { 0x00, 0x02, 0x01, 0x51, 0x09, 0x06 },   // ?
    { 0x00, 0x32, 0x49, 0x59, 0x51, 0x3E },   // @
    { 0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C },   // A
    { 0x00, 0x7F, 0x49, 0x49, 0x49, 0x36 },   // B
    { 0x00, 0x3E, 0x41, 0x41, 0x41, 0x22 },   // C
    { 0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C },   // D
    { 0x00, 0x7F, 0x49, 0x49, 0x49, 0x41 },   // E
    { 0x00, 0x7F, 0x09, 0x09, 0x09, 0x01 },   // F
    { 0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A },   // G
    { 0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F },   // H
    { 0x00, 0x00, 0x41, 0x7F, 0x41, 0x00 },   // I
    { 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01 },   // J
    { 0x00, 0x7F, 0x08, 0x14, 0x22, 0x41 },   // K
    { 0x00, 0x7F, 0x40, 0x40, 0x40, 0x40 },   // L
    { 0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F },   // M
    { 0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F },   // N
    { 0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E },   // O
    { 0x00, 0x7F, 0x09, 0x09, 0x09, 0x06 },   // P
    { 0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E },   // Q
    { 0x00, 0x7F, 0x09, 0x19, 0x29, 0x46 },   // R
    { 0x00, 0x46, 0x49, 0x49, 0x49, 0x31 },   // S
    { 0x00, 0x01, 0x01, 0x7F, 0x01, 0x01 },   // T
    { 0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F },   // U
    { 0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F },   // V
    { 0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F },   // W
    { 0x00, 0x63, 0x14, 0x08, 0x14, 0x63 },   // X
    { 0x00, 0x07, 0x08, 0x70, 0x08, 0x07 },   // Y
    { 0x00, 0x61, 0x51, 0x49, 0x45, 0x43 },   // Z
    { 0x00, 0x00, 0x7F, 0x41, 0x41, 0x00 },   // [
    { 0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55 },   // 55
    { 0x00, 0x00, 0x41, 0x41, 0x7F, 0x00 },   // ]
    { 0x00, 0x04, 0x02, 0x01, 0x02, 0x04 },   // ^
    { 0x00, 0x40, 0x40, 0x40, 0x40, 0x40 },   // _
    { 0x00, 0x00, 0x01, 0x02, 0x04, 0x00 },   // '
    { 0x00, 0x20, 0x54, 0x54, 0x54, 0x78 },   // a
    { 0x00, 0x7F, 0x48, 0x44, 0x44, 0x38 },   // b
    { 0x00, 0x38, 0x44, 0x44, 0x44, 0x20 },   // c
    { 0x00, 0x38, 0x44, 0x44, 0x48, 0x7F },   // d
    { 0x00, 0x38, 0x54, 0x54, 0x54, 0x18 },   // e
    { 0x00, 0x08, 0x7E, 0x09, 0x01, 0x02 },   // f
    { 0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C },   // g
    { 0x00, 0x7F, 0x08, 0x04, 0x04, 0x78 },   // h
    { 0x00, 0x00, 0x44, 0x7D, 0x40, 0x00 },   // i
    { 0x00, 0x40, 0x80, 0x84, 0x7D, 0x00 },   // j
    { 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00 },   // k
    { 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00 },   // l
    { 0x00, 0x7C, 0x04, 0x18, 0x04, 0x78 },   // m
    { 0x00, 0x7C, 0x08, 0x04, 0x04, 0x78 },   // n
    { 0x00, 0x38, 0x44, 0x44, 0x44, 0x38 },   // o
    { 0x00, 0xFC, 0x24, 0x24, 0x24, 0x18 },   // p
    { 0x00, 0x18, 0x24, 0x24, 0x18, 0xFC },   // q
    { 0x00, 0x7C, 0x08, 0x04, 0x04, 0x08 },   // r
    { 0x00, 0x48, 0x54, 0x54, 0x54, 0x20 },   // s
    { 0x00, 0x04, 0x3F, 0x44, 0x40, 0x20 },   // t
    { 0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C },   // u
    { 0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C },   // v
    { 0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C },   // w
    { 0x00, 0x44, 0x28, 0x10, 0x28, 0x44 },   // x
    { 0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C },   // y
    { 0x00, 0x44, 0x64, 0x54, 0x4C, 0x44 },   // z
    { 0x14, 0x14, 0x14, 0x14, 0x14, 0x14 }    // horiz lines
};

const unsigned char F14x16[] = {  
	0x00,0x20,0x04,0xC0,0xFC,0x04,0xF4,0x04,0xFC,0x00,0xF0,0x00,0xFC,0x00,
    0x00,0x00,0x7E,0x41,0x47,0x38,0x07,0x10,0x67,0x00,0x0F,0x40,0x3F,0x00,//测0
	0x00,0x80,0x8C,0x90,0x10,0x20,0x20,0x20,0xA0,0xFE,0x20,0x24,0x18,0x00,
    0x00,0x00,0x00,0x7F,0x10,0x28,0x21,0x1F,0x10,0x09,0x0E,0x30,0x70,0x00,//试1
	0x00,0x00,0xF0,0x10,0x10,0x10,0xFE,0x12,0x10,0x10,0x10,0xF0,0x00,0x00,
    0x00,0x00,0x03,0x02,0x02,0x02,0xFF,0x02,0x02,0x02,0x02,0x03,0x00,0x00,//中2
	0xB8,0x97,0x92,0x90,0x94,0xB8,0x10,0x00,0x7F,0x48,0x48,0x44,0x74,0x20,
	0xFF,0x0A,0x0A,0x4A,0x8A,0x7F,0x00,0x00,0x3F,0x44,0x44,0x42,0x72,0x20,//能3	
};

//======================================================
// 128X64I液晶底层驱动[8X16]字体库
// 设计者: powerint
// 描  述: [8X16]西文字符的字模数据 (纵向取模,字节倒序)
// !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
//======================================================

const unsigned char F8X16[]=
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//!1
  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//"2
  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//#3
  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$4
  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//%5
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//&6
  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//'7
  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//(8
  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//)9
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//*10
  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//,12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//-13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//.14
  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,///15
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//016
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//117
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//218
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//319
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//420
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//521
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//622
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//723
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//824
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//925
  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//:26
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//;27
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//<28
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//=29
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//>30
  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//?31
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@32
  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A33
  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B34
  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C35
  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D36
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E37
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F38
  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G39
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H40
  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I41
  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J42
  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K43
  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L44
  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M45
  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N46
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O47
  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P48
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q49
  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R50
  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S51
  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T52
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U53
  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V54
  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W55
  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X56
  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y57
  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z58
  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[59
  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\60
  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//]61
  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_63
  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//`64
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a65
  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b66
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c67
  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d68
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e69
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f70
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g71
  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h72
  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i73
  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j74
  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k75
  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l76
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m77
  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n78
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o79
  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p80
  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q81
  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r82
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s83
  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t84
  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u85
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v86
  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w87
  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x88
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y89
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z90
  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{91
  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//|92
  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//}93
  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~94

};


void LCD_WrDat(unsigned char dat)
{
	unsigned char i=8;
	//LCD_CS=0;;
    LCD_DC_1;;
    LCD_SCL_0;;
  //;;    
  while(i--)
  {
    if(dat&0x80){LCD_SDA_1;}
    else{LCD_SDA_0;}
    LCD_SCL_1; 
    ;;;
		//;;            
    LCD_SCL_0;;    
    dat<<=1;    
  }
	//LCD_CS=1;
}
void LCD_WrCmd(unsigned char cmd)
{
	unsigned char i=8;
	
	//LCD_CS=0;;
	LCD_DC_0;;
  LCD_SCL_0;;
  //;;   
  while(i--)
  {
    if(cmd&0x80){LCD_SDA_1;}
    else{LCD_SDA_0;;}
    LCD_SCL_1;;
    ;;;
		//;;             
    LCD_SCL_0;;    
    cmd<<=1;;   
  } 	
	//LCD_CS=1;
}
void LCD_Set_Pos(unsigned char x, unsigned char y)
{ 
  LCD_WrCmd(0xb0+y);
  LCD_WrCmd(((x&0xf0)>>4)|0x10);
  LCD_WrCmd((x&0x0f)|0x00); 
} 
void LCD_Fill(unsigned char bmp_dat)
{
	unsigned char y,x;
	
	for(y=0;y<8;y++)
	{
		LCD_WrCmd(0xb0+y);
		LCD_WrCmd(0x01);
		LCD_WrCmd(0x10);
		for(x=0;x<X_WIDTH;x++)
			LCD_WrDat(bmp_dat);
	}
}
void LCD_CLS(void)
{
	unsigned char y,x;	
	for(y=0;y<8;y++)
	{
		LCD_WrCmd(0xb0+y);
		LCD_WrCmd(0x01);
		LCD_WrCmd(0x10); 
		for(x=0;x<X_WIDTH;x++)
			LCD_WrDat(0);
	}
}
void LCD_DLY_ms(unsigned int ms)
{                         
  unsigned int a;
  while(ms)
  {
    a=1335;
    while(a--);
    ms--;
  }
  return;
} 
void LCD_Init(void)        
{  
	LCD_SCL_1;
	//LCD_CS=1;	//预制SLK和SS为高电平  	
	LCD_RST_0;
	LCD_DLY_ms(50);
	LCD_RST_1;
	
	//从上电到下面开始初始化要有足够的时间，即等待RC复位完毕   
  
  LCD_WrCmd(0xae);//--turn off oled panel
  LCD_WrCmd(0x00);//---set low column address
  LCD_WrCmd(0x10);//---set high column address
  LCD_WrCmd(0x40);//--set start line address  Set Mapping RAM Display Start Line (0x00~0x3F)
  LCD_WrCmd(0x81);//--set contrast control register
  LCD_WrCmd(0xcf); // Set SEG Output Current Brightness
  LCD_WrCmd(0xa1);//--Set SEG/Column Mapping     0xa0左右反置 0xa1正常
  LCD_WrCmd(0xc8);//Set COM/Row Scan Direction   0xc0上下反置 0xc8正常
  LCD_WrCmd(0xa6);//--set normal display
  LCD_WrCmd(0xa8);//--set multiplex ratio(1 to 64)
  LCD_WrCmd(0x3f);//--1/64 duty
  LCD_WrCmd(0xd3);//-set display offset	Shift Mapping RAM Counter (0x00~0x3F)
  LCD_WrCmd(0x00);//-not offset
  LCD_WrCmd(0xd5);//--set display clock divide ratio/oscillator frequency
  LCD_WrCmd(0x80);//--set divide ratio, Set Clock as 100 Frames/Sec
  LCD_WrCmd(0xd9);//--set pre-charge period
  LCD_WrCmd(0xf1);//Set Pre-Charge as 15 Clocks & Discharge as 1 Clock
  LCD_WrCmd(0xda);//--set com pins hardware configuration
  LCD_WrCmd(0x12);
  LCD_WrCmd(0xdb);//--set vcomh
  LCD_WrCmd(0x40);//Set VCOM Deselect Level
  LCD_WrCmd(0x20);//-Set Page Addressing Mode (0x00/0x01/0x02)
  LCD_WrCmd(0x02);//
  LCD_WrCmd(0x8d);//--set Charge Pump enable/disable
  LCD_WrCmd(0x14);//--set(0x10) disable
  LCD_WrCmd(0xa4);// Disable Entire Display On (0xa4/0xa5)
  LCD_WrCmd(0xa6);// Disable Inverse Display On (0xa6/a7) 
  LCD_WrCmd(0xaf);//--turn on oled panel
  LCD_Fill(0x00);  //初始清屏
  LCD_Set_Pos(0,0); 	
} 

//==============================================================
//函数名：LCD_P6x8Str(unsigned char x,unsigned char y,unsigned char *p)
//功能描述：写入一组标准ASCII字符串
//参数：显示的位置（x,y），y为页范围0～7，要显示的字符串
//返回：无
//==============================================================  
void LCD_P6x8Str(unsigned char x,unsigned char y,unsigned char ch[])
{
  unsigned char c=0,i=0,j=0;      
  while (ch[j]!='\0')
  {    
    c =ch[j]-32;
    if(x>126){x=0;y++;}
    LCD_Set_Pos(x,y);    
  	for(i=0;i<6;i++)     
  	  LCD_WrDat(F6x8[c][i]);  
  	x+=6;
  	j++;
  }
}
//==============================================================
//函数名：LCD_P8x16Str(unsigned char x,unsigned char y,unsigned char *p)
//功能描述：写入一组标准ASCII字符串
//参数：显示的位置（x,y），y为页范围0～7，要显示的字符串
//返回：无
//============================================================== 
 
void LCD_P8x16Str(unsigned char x,unsigned char y,unsigned char ch[])
{
  unsigned char c=0,i=0,j=0;
        
  while (ch[j]!='\0')
  {    
    c =ch[j]-32;
    if(x>120){x=0;y++;}
    LCD_Set_Pos(x,y);    
  	for(i=0;i<8;i++)     
  	  LCD_WrDat(F8X16[c*16+i]);
  	LCD_Set_Pos(x,y+1);    
  	for(i=0;i<8;i++)     
  	  LCD_WrDat(F8X16[c*16+i+8]);  
  	x+=8;
  	j++;
  }
}

//输出汉字字符串
void LCD_P14x16Ch(unsigned char x,unsigned char y,unsigned char N)
{
	unsigned char wm=0,ii = 0;
	unsigned int adder=28*N;    	
  	LCD_Set_Pos(x , y);
  	for(wm = 0;wm < 14;wm++)               
  	{
  		LCD_WrDat(F14x16[adder]);	
  		adder += 1;
  	}      
  	LCD_Set_Pos(x,y + 1); 
  	for(wm = 0;wm < 14;wm++)          
  	{
  		LCD_WrDat(F14x16[adder]);
  		adder += 1;
  	} 	  	
}

LQ2864.h文件：

#ifndef _LQOLED_H
#define _LQOLED_H
//#include"stc.h"
//#include "intrins.h" 
 	#define byte  unsigned char
	#define word  unsigned int
	#define dword unsigned long  
 void LCD_Init(void);
 void LCD_CLS(void);
 void LCD_P6x8Str(byte x,byte y,byte ch[]);
 void LCD_P8x16Str(byte x,byte y,byte ch[]);
 void LCD_P14x16Ch(byte x,byte y,byte N);  	  
 void LCD_Fill(byte dat);
#endif

知识总结：

本节先使用syscfg配置GPIO口，ADC，然后使用直接生成的初始化代码，将电位器连接到板子上，在OLED屏幕上显示实时电压。

思考：

ADC转换记得设置转换时间！125us就可以了。