HCIP作业3——MGRE综合实验

一、实验及拓扑

 二、实验步骤

1、配置IP

R1

[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.254 24
[R1-GigabitEthernet0/0/0]int s4/0/0
[R1-Serial4/0/0]ip add 15.1.1.1 24
[R1-Serial4/0/0]quit

R2

[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 192.168.2.254 24
[R2-GigabitEthernet0/0/0]int s4/0/0
[R2-Serial4/0/0]ip add 25.1.1.2 24
[R2-Serial4/0/0]quit

 R3

[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 192.168.3.254 24
[R3-GigabitEthernet0/0/0]int s4/0/0
[R3-Serial4/0/0]ip add 35.1.1.3 24
[R3-Serial4/0/0]quit

R4

[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 45.1.1.4 24
[R4-GigabitEthernet0/0/0]int g0/0/1
[R4-GigabitEthernet0/0/1]ip add 192.168.4.254 24
[R4-GigabitEthernet0/0/1]quit

R5

[R5]int s4/0/1
[R5-Serial4/0/1]ip add 15.1.1.5 24
[R5-Serial4/0/1]int s3/0/1
[R5-Serial3/0/1]ip add 25.1.1.5 24
[R5-Serial3/0/1]int s4/0/0
[R5-Serial4/0/0]ip add 35.1.1.5 24
[R5-Serial4/0/0]int g0/0/0
[R5-GigabitEthernet0/0/0]ip add 45.1.1.5 24

[R5]int l0
[R5-LoopBack0]ip add 5.5.5.5 24
[R5-LoopBack0]quit

2、认证

①PAP认证

R5(主认证方)

[R5]aaa
[R5-aaa]local-user wangdaye password cipher wdy12345
[R5-aaa]local-user wangdaye service-type ppp
[R5-aaa]quit

[R5]int s4/0/1
[R5-Serial4/0/1]ppp authentication-mode pap
[R5-Serial4/0/1]quit

R1(被认证方)

[R1]int s4/0/0
[R1-Serial4/0/0]ppp pap local-user wangdaye password cipher way12345

用shutdown和undo shutdown做测试后,ping一下

②CHAP认证

R5(主认证方)【用刚刚创建的用户】

[R5]int s3/0/1
[R5-Serial3/0/1]ppp authentication-mode chap
[R5-Serial3/0/1]quit

R2(被认证方)

[R2]int s4/0/0
[R2-Serial4/0/0]ppp chap user wangdaye
[R2-Serial4/0/0]ppp chap  password cipher wdy12345
[R2-Serial4/0/0]quit

同上,用shutdown和undo shutdown做测试后,ping一下

③HDLC封装

R3

查看协议
[R3]int s4/0/0
[R3-Serial4/0/0]dis th
[V200R003C00]
#
interface Serial4/0/0
 link-protocol ppp
 ip address 35.1.1.3 255.255.255.0 
#
return
修改协议
[R3-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y

检查 

R5

[R5]int s4/0/0
[R5-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y

检查

3、构建环境

①公网通(静态缺省)
R1
[R1]ip route-static 0.0.0.0 0 15.1.1.5

R2
[R2]ip route-static 0.0.0.0 0 25.1.1.5

R3
[R3]ip route-static 0.0.0.0 0 35.1.1.5

R4
[R4]ip route-static 0.0.0.0 0 45.1.1.5
②检测

测R1的公网

测R2的公网

测R3的公网

③构建隧道
MGRE

R1

[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip add 10.1.1.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 15.1.1.1
Jul 26 2024 03:01:38-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface Tunnel0/0/0 has entered the UP state. 
[R1-Tunnel0/0/0]NHRP network-id 100

R2

[R2]int Tunnel 0/0/0
[R2-Tunnel0/0/0]ip add 10.1.1.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp
[R2-Tunnel0/0/0]source serial 4/0/0
[R2-Tunnel0/0/0]nhrp network-id 100
[R2-Tunnel0/0/0]nhrp entry 10.1.1.1 15.1.1.1 register

 R3

[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]ip add 10.1.1.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp
[R3-Tunnel0/0/0]source serial 4/0/0
[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]nhrp entry 10.1.1.1 15.1.1.1 register
 GRE

R1

[R1]int Tunnel 0/0/1 
[R1-Tunnel0/0/1]ip add 10.1.2.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre
[R1-Tunnel0/0/1]source 15.1.1.1
[R1-Tunnel0/0/1]destination 45.1.1.4

   R4

[R4]int Tunnel 0/0/1
[R4-Tunnel0/0/1]ip add 10.1.2.4 24
[R4-Tunnel0/0/1]tunnel-protocol gre
[R4-Tunnel0/0/1]source 45.1.1.4
[R4-Tunnel0/0/1]destination 15.1.1.1

4、配置RIP协议

R1

[R1]rip 1
[R1-rip-1]v 2
[R1-rip-1]undo su
[R1-rip-1]net 192.168.1.0
[R1-rip-1]net 10.0.0.0

R2

[R2]rip 1
[R2-rip-1]v 2
[R2-rip-1]undo su
[R2-rip-1]ne 192.168.2.0
[R2-rip-1]ne 10.0.0.0

R3

[R3]rip 1
[R3-rip-1]v 2
[R3-rip-1]undo summary
[R3-rip-1]ne 192.168.3.0
[R3-rip-1]ne 10.0.0.0

R4

[R4]rip 1
[R4-rip-1]v 2
[R4-rip-1]undo su
[R4-rip-1]ne 192.168.4.0
[R4-rip-1]ne 10.0.0.0
[R4-rip-1]quit

因为MGRE学不全,所以进行如下操作:(伪广播)

R1

[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]nhrp entry multicast dynamic
[R1-Tunnel0/0/0]undo rip split-horizon

R2

[R2]int t0/0/0
[R2-Tunnel0/0/0]undo rip split-horizon

R3

[R3]int t0/0/0
[R3-Tunnel0/0/0]undo rip split-horizon

 R1

R2

R3

R4     

5、做net

R1

[R1]acl 2000
[R1-acl-basic-2000]rule per
[R1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R1-acl-basic-2000]quit
[R1]int s4/0/0
[R1-Serial4/0/0]nat outbound 2000
[R1-Serial4/0/0]quit

R2

[R2]acl 2000
[R2-acl-basic-2000]rule per
[R2-acl-basic-2000]rule permit source 192.168.3.0 0.0.0.255
[R2-acl-basic-2000]quit
[R2]int s4/0/0
[R2-Serial4/0/0]nat outbound 2000
[R2-Serial4/0/0]quit

R3

[R3]acl 2000
[R3-acl-basic-2000]rule per
[R3-acl-basic-2000]rule permit source 192.168.3.0 0.0.0.255
[R3-acl-basic-2000]quit
[R3]int s4/0/0
[R3-Serial4/0/0]nat outbound 2000
[R3-Serial4/0/0]quit

 R4

[R4]acl 2000
[R4-acl-basic-2000]rule per
[R4-acl-basic-2000]rule permit source 192.168.4.0 0.0.0.255
[R4-acl-basic-2000]quit
[R4]int g0/0/0
[R4-Serial4/0/0]nat outbound 2000
[R4-Serial4/0/0]quit

                                

  • 0
    点赞
  • 2
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
HCIP实验100是华为认证网络专家(Huawei Certified IP Professional)培养计划的一部分,是其可供选择的实验之一。综合实验的目的是为了让学员在真实的网络环境中应用所学知识和技能,通过解决实际问题来提升他们的专业能力。 在这项实验中,学员将面临一个综合的网络实景场景,需要通过设计、规划和操作来构建和维护一个复杂的网络架构。实验内容包括网络设备的安装调试、网络拓扑的设计与优化、网络服务的配置与管理等。 在实验过程中,学员需要通过分析业务需求,理解网络架构,制定相应的方案。在网络设备安装调试阶段,学员需要进行硬件组装、设备配置操作,并进行相关测试和调整,以确保设备正常工作。在网络拓扑设计与优化阶段,学员需要考虑网络规模、性能需求、容灾能力等因素,并利用各项技术手段进行设计和优化。在网络服务配置与管理阶段,学员需要完成各种网络服务的配置,如IP地址分配、路由协议配置、安全策略配置等。 这个实验对学员的要求非常高,在实验过程中,学员需要综合应用他们所学的各种知识和技能,如网络硬件的安装与调试、网络拓扑设计与规划、网络服务配置与管理等。同时,学员需要具备良好的沟通能力、问题解决能力和团队协作能力,以便在解决问题时能与他人有效合作。 通过完成HCIP实验100综合实验,学员将对网络架构的设计和实施有更深入的理解,提升了技术能力和实践经验,为日后从事网络相关工作打下了坚实的基础。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值