HCIP作业六——VLAN实验

一、实验拓扑：

二、实验思路：

1.创建各个vlan（因通信需求在LSW1/LSW2/LSW3都需要创建VLAN2-6）

2.配置接口类型及增删标签

3.配置地址池以供DHCP服务

三、实验步骤

1、创建VLAN

[sw1]vlan batch 2 to 6
[sw2]vlan batch 2 to 6
[sw3]vlan batch 2 to 6

2、配置接口类型及增删标签

sw1

[sw1]int g0/0/1
 
[sw1-GigabitEthernet0/0/1]port link-type access
 
[sw1-GigabitEthernet0/0/1]port default vlan 2
 
[sw1]int g 0/0/2
 
[sw1-GigabitEthernet0/0/2]port link-type hybrid
 
[sw1-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 6
 
[sw1-GigabitEthernet0/0/2]port hybrid pvid vlan 3
 
[sw1]int g 0/0/3
 
[sw1-GigabitEthernet0/0/3]port link-type trunk
 
[sw1-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6
 
[sw1]int g 0/0/4
 
[sw1-GigabitEthernet0/0/4]port link-type hybrid
 
[sw1-GigabitEthernet0/0/4]port hybrid untagged vlan3 4 5 6
 
[sw1-GigabitEthernet0/0/4]port hybrid tagged vlan 2

sw2

[sw2]int g0/0/1
[sw2-GigabitEthernet0/0/1]port link-type access 
[sw2-GigabitEthernet0/0/1]port default vlan 2
[sw2-GigabitEthernet0/0/1]int g0/0/2
[sw2-GigabitEthernet0/0/2]port hybrid pvid vlan 4
[sw2-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 6
[sw2-GigabitEthernet0/0/2]int g0/0/3
[sw2-GigabitEthernet0/0/3]port link-type  trunk 
[sw2-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6
[sw2-GigabitEthernet0/0/3]int g0/0/4
[sw2-GigabitEthernet0/0/4]port link-type trunk 
[sw2-GigabitEthernet0/0/4]port trunk allow-pass vlan 2 to 6

sw3

[sw3]int g0/0/1
[sw3-GigabitEthernet0/0/1]port hybrid pvid vlan 5
[sw3-GigabitEthernet0/0/1]port hybrid untagged vlan 3 to 5
[sw3-GigabitEthernet0/0/1]int g0/0/2
[sw3-GigabitEthernet0/0/2]port hybrid pvid vlan 6
[sw3-GigabitEthernet0/0/2]port hybrid untagged vlan 3 4 6
[sw3-GigabitEthernet0/0/2]int g0/0/3
[sw3-GigabitEthernet0/0/3]port link-type trunk 
[sw3-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6

3、配置路由器接口

[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.1.254 24
[r1-GigabitEthernet0/0/0]int g0/0/0.1
[r1-GigabitEthernet0/0/0.1]ip add 192.168.2.254 24
[r1-GigabitEthernet0/0/0.1]dot1q termination vid 2
[r1-GigabitEthernet0/0/0.1]arp broadcast enable

4、配置DHCP服务

[r1]dhcp enable 
[r1]ip pool v3456
[r1-ip-pool-v3456]network 192.168.1.0 mask 24
[r1-ip-pool-v3456]gateway-list 192.168.1.254	
[r1-ip-pool-v3456]dns-list 8.8.8.8 114.114.114.114
[r1-GigabitEthernet0/0/0]dhcp select global 
 
[r1]ip pool v2
[r1-ip-pool-v2]network 192.168.2.0 mask 24
[r1-ip-pool-v2]gateway-list 192.168.2.254
[r1-ip-pool-v2]dns 8.8.8.8 114.114.114.114
[r1]int g0/0/0.1	
[r1-GigabitEthernet0/0/0.1]dhcp select global 

PC1（vlan 2）:

PC2（vlan 3）:

PC3（vlan 2）:

PC4（vlan 4）:

PC5（vlan 5）:

PC6（vlan 6）:

ping通测试：