1.所有设备必须有预配,都得改名r1,r2
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r1
[r1]user-interface console 0
[r1-ui-console0]idle-timeout 0
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname r2
[r2]user-interface console 0
[r2-ui-console0]idle-timeout 0 0
2.r1使用密码加密,密码为jincheng
[r1]user-interface console 0
[r1-ui-console0]authentication-mode password
Please configure the login password (maximum length 16):jincheng
3.r2使用用户名为jincheng 管理权限15 密码为xueyuan
r2使用用户名为xuesheng 管理权限0 密码 123
[r2]aaa
[r2-aaa]local-user jincheng privilege level 15 password cipher xueyuan
Info: Add a new user.
[r2-aaa]local-user jincheng service-type terminal
[r2-aaa]local-user xuesheng privilege level 0 password cipher 123
Info: Add a new user.
4.r1可以ping通r2 使用的地址为192.168.1.0/24
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
Oct 30 2022 10:15:51-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]ip address 192.168.1.1 255.255.255.0
Error: The address already exists.
[r2]interface g0/0/0
[r2-GigabitEthernet0/0/0]ip address 192.168.1.2 24
Oct 30 2022 10:19:20-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]ip address 192.168.1.2 255.255.255.0
Error: The address already exists.
<r1>ping 192.168.1.2
PING 192.168.1.2: 56 data bytes, press CTRL_C to break
Reply from 192.168.1.2: bytes=56 Sequence=1 ttl=255 time=170 ms
Reply from 192.168.1.2: bytes=56 Sequence=2 ttl=255 time=30 ms
Reply from 192.168.1.2: bytes=56 Sequence=3 ttl=255 time=20 ms
Reply from 192.168.1.2: bytes=56 Sequence=4 ttl=255 time=30 ms
Reply from 192.168.1.2: bytes=56 Sequence=5 ttl=255 time=20 ms
--- 192.168.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/54/170 ms