eNSP-路由引入与过滤简单配置

目录

实验要求

IP配置

配置动态路由协议

RIP

OSPF

查看建邻情况

双向重发布

路由过滤

 地址前缀列表

静默接口

---

实验要求

1、按照图示配置 IP 地址，R1，R3，R4 上使用 loopback 口模拟业务网段
2、R1 和R2 运行 RIPv2，R2，R3和R4运行 oSPF，各自协议内部互通
3、在 RIP 和 oSPF 间配置双向路由引入，要求除 R4 上的业务网段以外，其他业务网段路由都引入到对方协议内部
4、使用路由过滤，使 R4 无法学习到 R1的业务网段路由，要求使用 prefix-list 进行匹配
5、0SPF 区域中不能出现 RIP 协议报文

IP配置

R1：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R1
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 100.1.1.1 24
[R1-GigabitEthernet0/0/0]
Apr 22 2024 19:33:49-08:00 R1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R1-GigabitEthernet0/0/0]int l0
[R1-LoopBack0]ip add 192.168.0.1 32
[R1-LoopBack0]int l1
[R1-LoopBack1]ip add 192.168.1.1 32
[R1-LoopBack1]q
[R1]dis ip int b 
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 4
The number of interface that is DOWN in Physical is 2
The number of interface that is UP in Protocol is 4
The number of interface that is DOWN in Protocol is 2

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              100.1.1.1/24         up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
LoopBack0                         192.168.0.1/32       up         up(s)     
LoopBack1                         192.168.1.1/32       up         up(s)     
NULL0                             unassigned           up         up(s)     
[R1]

R2：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R2
[R2]int g 0/0/0
[R2-GigabitEthernet0/0/0]ip add 100.1.1.2 24
[R2-GigabitEthernet0/0/0]
Apr 22 2024 19:35:32-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R2-GigabitEthernet0/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 100.2.2.2 24
Apr 22 2024 19:35:50-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R2-GigabitEthernet0/0/1]q
[R2]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              100.1.1.2/24         up         up        
GigabitEthernet0/0/1              100.2.2.2/24         up         up        
GigabitEthernet0/0/2              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
[R2]

R3：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R3
[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 100.2.2.3 24
[R3-GigabitEthernet0/0/0]
Apr 22 2024 19:36:59-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R3-GigabitEthernet0/0/0]int g 0/0/1
[R3-GigabitEthernet0/0/1]ip add 100.3.3.3 24
Apr 22 2024 19:37:21-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state. 
[R3-GigabitEthernet0/0/1]int l0
[R3-LoopBack0]ip add 192.168.2.1 32
[R3-LoopBack0]int l1
[R3-LoopBack1]ip add 192.168.3.1 32
[R3-LoopBack1]q
[R3]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 5
The number of interface that is DOWN in Physical is 1
The number of interface that is UP in Protocol is 5
The number of interface that is DOWN in Protocol is 1

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              100.2.2.3/24         up         up        
GigabitEthernet0/0/1              100.3.3.3/24         up         up        
GigabitEthernet0/0/2              unassigned           down       down      
LoopBack0                         192.168.2.1/32       up         up(s)     
LoopBack1                         192.168.3.1/32       up         up(s)     
NULL0                             unassigned           up         up(s)     
[R3]

R4：

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R4
[R4]int  g0/0/0
[R4-GigabitEthernet0/0/0]ip add 100.3.3.4 24
[R4-GigabitEthernet0/0/0]
Apr 22 2024 19:39:54-08:00 R4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state. 
[R4-GigabitEthernet0/0/0]int l0
[R4-LoopBack0]ip add 192.168.4.1 32
[R4-LoopBack0]int l1
[R4-LoopBack1]ip add 192.168.5.1 32
[R4-LoopBack1]q
[R4]dis ip int b
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
The number of interface that is UP in Physical is 4
The number of interface that is DOWN in Physical is 2
The number of interface that is UP in Protocol is 4
The number of interface that is DOWN in Protocol is 2

Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              100.3.3.4/24         up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
LoopBack0                         192.168.4.1/32       up         up(s)     
LoopBack1                         192.168.5.1/32       up         up(s)     
NULL0                             unassigned           up         up(s)     
[R4]

配置动态路由协议

RIP

R1：

[R1]rip 1
[R1-rip-1]v 2	
[R1-rip-1]undo summary 
[R1-rip-1]net 100.0.0.0
[R1-rip-1]net 192.168.0.0
[R1-rip-1]net 192.168.1.0

R2：

[R2]rip 1
[R2-rip-1]v 2
[R2-rip-1]undo summary 
[R2-rip-1]net 100.0.0.0

OSPF

R2：

[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]a 0
[R2-ospf-1-area-0.0.0.0]net 100.2.2.0 0.0.0.255

R3：

[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]a 0
[R3-ospf-1-area-0.0.0.0]net 100.2.2.0 0.0.0.255
[R3-ospf-1-area-0.0.0.0]net 192.168.2.0 0.0.1.255
[R3-ospf-1-area-0.0.0.0]q
[R3-ospf-1]a 1
[R3-ospf-1-area-0.0.0.1]net 100.3.3.0 0.0.0.255

R4：

[R4]ospf 1 router-id 4.4.4.4
[R4-ospf-1]a 1
[R4-ospf-1-area-0.0.0.1]net 100.3.3.0 0.0.0.255 
[R4-ospf-1-area-0.0.0.1]net 192.168.4.0 0.0.1.255

查看建邻情况

R2：

R3：

R4：

双向重发布

R2：

[R2]rip 1
[R2-rip-1]im	
[R2-rip-1]import-route ospf
[R2-rip-1]q
[R2]ospf 1
[R2-ospf-1]im	
[R2-ospf-1]import-route rip

查看路由表：

R1：

R2：

OSPF：

RIP：

R3：

R4：

路由过滤

因为需要R4上的业务网段不引入RIP协议网段中，所以在R2上配置路由过滤：

[R2]acl 2000	
[R2-acl-basic-2000]rule permit source 192.168.4.0 0.0.1.255
[R2-acl-basic-2000]q	
[R2]route-policy a deny node 1
Info: New Sequence of this List.
[R2-route-policy]if-match acl 2000	
[R2-route-policy]q
[R2]route-policy a permit node 2
Info: New Sequence of this List.
[R2-route-policy]q
[R2]rip 1
[R2-rip-1]import-route ospf route-policy a

查看RIP区域路由表：

 R1：

 地址前缀列表

R4无法学习到R1的业务网段路由，使用地址前缀列表完成：

R2：

[R2]ip ip-prefix q index 1 deny 192.168.0.0 23 less-equal 32
[R2]ip ip-prefix q index 2 permit 0.0.0.0 0 less-equal 32
[R2]route-policy w permit node 1
Info: New Sequence of this List.	
[R2-route-policy]if-match ip-prefix q
[R2-route-policy]q
[R2]ospf 1
[R2-ospf-1]import-route rip route-policy w

查看R4路由表：

静默接口

因为RIP协议按主类宣告的特点，area 0区域也被宣告进了RIP的管辖区域，故要实现要求5,可以采用静默接口的方法：

[R2]rip 1
[R2-rip-1]silent-interface g0/0/1

至此配置完成。