OSAing userguide

1  OSAgeingTool

For S3/S4/Warm Boot/Cold Boot Use

2. MainForm

Use Ctrl + Alt and click right down button to Open Engineer mode

 

3. Engineer mode

1  Test Item
S3 .S4.Cold Boot. Warm Boot can be choose
2  Count down before Test
Must > 10s
3  Sleep Time
Must > 20s
4  Execute Count
Must >=0 and <=1000

 

 

Check devicelist
If this check box is checked, tool will compare all Device list every cycle
Check device error
If this check box is checked, tool will stop when error happen

Check Use Time

no use

Check device AlwaysPhotograph
If this check box is checked  ,If this testfailed, tool will prtsc  all screen to log folder

AutoWarning

If this check box is checked  ,if there is device error  before test  start ,tool will  auto  waring user

Check error message
not use 

mordenStandby

not use 

RTC coldboot

not use 

powerbutton wake 

not use 

 

auto run    

If this check box is checked, tool will start after  save plan 

auto exit

If this check box is checked, tool will close after  finish test 

stop on fail 

If this check box is checked, tool will stop after  one fail 

If this check box is  not checked, tool will log failed and  go on  when test failed , 

auto execute other program when test finish 

If this check box is  checked, tool start other progaram in  path  line  

 

 

 

You can click Save and Exit button to save configuration

 

 

 

IgnorTest  

xx;yyy  

if you failed on special device ;  you can add  device to this ,then ignor the devcie ,avoid fail  

for example  

aaa,bbbb   ,then aaa ,bbbb device will be ignor  

 

 

4. How to use OSAgeingTool

Double click Start Button to start test

If you want to suspend test
You can double click Stop button then choose No

And double click Continue button to Continue test

If you want to suspend test
You can double click Stop button then choose Yes ,and report is generate

You can click View Test Report button to view Test Report

 

You can click View Test Log button to view Test Error Log (only Error Log)

3 You can click View Test Plan button to view Test Plan